Inicio Administración de potencia Reguladores lineales y de baja salida (LDO)

10A, low-VIN, low-noise high-accuracy ultra-low dropout (LDO) voltage regulator

Detalles del producto

Rating Catalog Vin (max) (V) 6 Vin (min) (V) 0.7 Iout (max) (A) 10 Output options Adjustable Output Vout (max) (V) 5.2 Vout (min) (V) 0.5 Noise (µVrms) 2.5 PSRR at 100 KHz (dB) 60 Iq (typ) (mA) 5 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start Thermal resistance θJA (°C/W) 19, 36 Load capacitance (min) (µF) 15 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 150 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 6 Vin (min) (V) 0.7 Iout (max) (A) 10 Output options Adjustable Output Vout (max) (V) 5.2 Vout (min) (V) 0.5 Noise (µVrms) 2.5 PSRR at 100 KHz (dB) 60 Iq (typ) (mA) 5 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start Thermal resistance θJA (°C/W) 19, 36 Load capacitance (min) (µF) 15 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 150 Operating temperature range (°C) -40 to 125
WQFN (RTW) 24 16 mm² 4 x 4
  • Input voltage range: 0.7V to 6.0V
  • Output voltage noise: 2.5µVRMS
  • 1% (max) accuracy over line, load, and temperature
  • Low dropout: 150mV (typ) at 10A
  • Power-supply rejection ratio (10A):
    • 84dB at 1kHz
    • 64dB at 10kHz
    • 49dB at 100kHz
    • 30dB at 1MHz
  • Excellent load transient response:
    • ±20mV with a 10mA to 10A load step
  • Adjustable output voltage range: 0.5V to 5.2V
  • Adjustable soft-start inrush control
  • BIAS rail: 3V to 12V external rail
  • Open-drain, power-good (PG) output
  • Package: 4mm × 4mm, 24-pin WQFN
    • EVM RθJA: 14.3°C/W
  • Input voltage range: 0.7V to 6.0V
  • Output voltage noise: 2.5µVRMS
  • 1% (max) accuracy over line, load, and temperature
  • Low dropout: 150mV (typ) at 10A
  • Power-supply rejection ratio (10A):
    • 84dB at 1kHz
    • 64dB at 10kHz
    • 49dB at 100kHz
    • 30dB at 1MHz
  • Excellent load transient response:
    • ±20mV with a 10mA to 10A load step
  • Adjustable output voltage range: 0.5V to 5.2V
  • Adjustable soft-start inrush control
  • BIAS rail: 3V to 12V external rail
  • Open-drain, power-good (PG) output
  • Package: 4mm × 4mm, 24-pin WQFN
    • EVM RθJA: 14.3°C/W

The TPS7N59 is a low-noise (2.5µVRMS), ultra-low-dropout linear regulator (LDO) capable of sourcing 10A with only 150mV of dropout, independently of the output voltage. The device output voltage is adjustable from 0.5V to 5.2V using a single external resistor. The combination of low noise, high PSRR (TBD dB at 1MHz), and high output-current capability makes the TPS7N59 designed for powering noise-sensitive components (such as RF amplifiers, radar sensors, SERDES and analog chipsets) found in radar power, communication, and imaging applications.

Digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input, low-output (LILO) voltage operation also benefit from the exceptional accuracy (1% over load, line, and temperature), remote sensing, excellent transient performance, and soft-start capabilities to provide good system performance. The versatility, performance, and small footprint solution make this LDO an excellent choice for high-current analog loads such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and imaging sensors as well as digital loads such as serializer/deserializers (SerDes), FPGAs, and DSPs.

The TPS7N59 is a low-noise (2.5µVRMS), ultra-low-dropout linear regulator (LDO) capable of sourcing 10A with only 150mV of dropout, independently of the output voltage. The device output voltage is adjustable from 0.5V to 5.2V using a single external resistor. The combination of low noise, high PSRR (TBD dB at 1MHz), and high output-current capability makes the TPS7N59 designed for powering noise-sensitive components (such as RF amplifiers, radar sensors, SERDES and analog chipsets) found in radar power, communication, and imaging applications.

Digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input, low-output (LILO) voltage operation also benefit from the exceptional accuracy (1% over load, line, and temperature), remote sensing, excellent transient performance, and soft-start capabilities to provide good system performance. The versatility, performance, and small footprint solution make this LDO an excellent choice for high-current analog loads such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and imaging sensors as well as digital loads such as serializer/deserializers (SerDes), FPGAs, and DSPs.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet TPS7N59 10A, Low-VIN , Low-Noise, High-Accuracy, Ultra-Low Dropout (LDO) Voltage Regulator datasheet PDF | HTML 11 feb 2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS7N59EVM-184 — Módulo de evaluación TPS7N59

El módulo de evaluación (EVM) TPS7N59EVM-184 es un diseño de referencia para la demostración y evaluación de ingeniería del TPS7N59, un regulador lineal con caída baja de tensión (LDO) de RF, ruido ultrabajo, PSRR ultraalto y capacidad de 10 A. Esta guía del usuario incluye instrucciones de (...)
Guía del usuario: PDF | HTML
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RTW) 24 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos