TUSB9261

ACTIVO

USB 3.0 de 5 Gbps a puente SATA

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TUSB9261 USB 3.0 to SATA Bridge datasheet (Rev. I) (Inglés) PDF | HTML

TUSB9261

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Type

Bridge

Function

USB3

USB speed (bps)

5000000000

Alternate mode

No

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Type

Bridge

Function

USB3

USB speed (bps)

5000000000

Alternate mode

No

Rating

Catalog

Operating temperature range (°C)

-40 to 85

HTQFP (PVP)

64

81 mm² (9 mm × 9 mm)

Universal Serial Bus (USB)
- SuperSpeed USB 3.0 Compliant – TID
  340730020
  - Integrated Transceiver Supports SS/HS/FS
    Signaling
- Best-in-Class Adaptive Equalizer
  - Allows for Greater Jitter Tolerance in the
    Receiver
- USB Class Support
  - USB Attached SCSI Protocol (UASP)
  - USB Mass Storage Class Bulk-Only
    Transport (BOT)
  - Support for Error Conditions Per the 13
    Cases (Defined in the BOT Specification)
  - USB Bootability Support
  - USB Human Interface Device (HID)
- Supports Firmware Update Via USB, Using a
  TI Provided Application
SATA Interface
- Serial ATA Specification Revision 2.6
  - Gen1i, Gen1m, Gen2i, and Gen2m
- Support for Mass-Storage Devices Compatible
  With the ATA/ATAPI-8 Specification
Integrated ARM Cortex M3 Core
- Customizable Application Code Loaded from
  EEPROM by SPI Interface
- Two Additional SPI Port Chip Selects for
  Peripheral Connection
- Up to 12 GPIOs for End-User Configuration
  - Two GPIOs have PWM Functionality for
    LED Blink Speed Control
- Serial Communications Interface for Debug
  (UART)
General Features
- Integrated Spread Spectrum Clock Generation
  Enables Operation from a Single Low-Cost
  Crystal or Clock Oscillator
  - Supports 40 MHz
- A JTAG Interface is Used for IEEE1149.1 and
  IEEE1149.6 Boundary Scan
- Available in a Fully RoHS-Compliant Package

Universal Serial Bus (USB)
- SuperSpeed USB 3.0 Compliant – TID
  340730020
  - Integrated Transceiver Supports SS/HS/FS
    Signaling
- Best-in-Class Adaptive Equalizer
  - Allows for Greater Jitter Tolerance in the
    Receiver
- USB Class Support
  - USB Attached SCSI Protocol (UASP)
  - USB Mass Storage Class Bulk-Only
    Transport (BOT)
  - Support for Error Conditions Per the 13
    Cases (Defined in the BOT Specification)
  - USB Bootability Support
  - USB Human Interface Device (HID)
- Supports Firmware Update Via USB, Using a
  TI Provided Application
SATA Interface
- Serial ATA Specification Revision 2.6
  - Gen1i, Gen1m, Gen2i, and Gen2m
- Support for Mass-Storage Devices Compatible
  With the ATA/ATAPI-8 Specification
Integrated ARM Cortex M3 Core
- Customizable Application Code Loaded from
  EEPROM by SPI Interface
- Two Additional SPI Port Chip Selects for
  Peripheral Connection
- Up to 12 GPIOs for End-User Configuration
  - Two GPIOs have PWM Functionality for
    LED Blink Speed Control
- Serial Communications Interface for Debug
  (UART)
General Features
- Integrated Spread Spectrum Clock Generation
  Enables Operation from a Single Low-Cost
  Crystal or Clock Oscillator
  - Supports 40 MHz
- A JTAG Interface is Used for IEEE1149.1 and
  IEEE1149.6 Boundary Scan
- Available in a Fully RoHS-Compliant Package

The TUSB9261 is an ARM^® Cortex^® M3 microcontroller based USB 3.0 to serial ATA bridge. It provides the necessary hardware and firmware to implement a USB attached SCSI protocol (UASP)-compliant mass storage device suitable for bridging hard disk drives (HDD), solid state disk drives (SSD), optical drives, and other compatible SATA 1.5-Gbps or SATA 3.0-Gbps devices to a USB 3.0 bus. In addition to UASP support, the firmware implements the mass storage class BOT and USB HID interfaces.

filter

Buscar otro/a PHY y puentes USB

Descargar Ver vídeo con transcripción Video

Solicitar más información

El código fuente de TUSB9261 ya está disponible. Solicitar ahora

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 7

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	TUSB9261 USB 3.0 to SATA Bridge datasheet (Rev. I)	PDF \| HTML	3/03/2016
*	Errata	TUSB9261 Errata (Rev. B)		20/12/2012
	Artículo técnico	6 key questions when designing for USB protocol interfaces	PDF \| HTML	31/07/2020
	Nota sobre la aplicación	TUSB9261 Implementation Guide (Rev. E)		9/12/2014
	Guía del usuario	TUSB9261 DEMO User's Guide (Rev. A)		9/12/2014
	Guía del usuario	TUSB9260 Flash Burner - User Guide (Rev. D)		24/10/2013
	Guía del usuario	TUSB926x SpeedBoost Monitor User's Guide		23/09/2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TUSB9261DEMO — Kit de demostración TUSB9261

The TUSB9261DEMO board is a bridge between a SuperSpeed USB (USB 3.0) bus and a Serial–ATA (SATA) development kit. The TUSB9261DEMO is used to evaluate system compatibility. It provides a TUSB9261 hardware for connection to a SATA device such as a solid state drive, hard disk drive, DVD (...)