Inicio Interfaz CIRCUITOS INTEGRADOS (IC) DE I2C, I3C Y SPI E/S de uso general (GPIO) I2C y SPI

TXE8124

ACTIVO

Expansor de I/O de bus SPI de 24 bits con interrupción, restablecimiento y registros configurables d

Detalles del producto

Number of I/Os 24 Features Configuration registers, Fail-safe, Interrupt pin, Reset pin Rating Catalog Frequency (max) (MHz) 10 Operating temperature range (°C) -40 to 125
Number of I/Os 24 Features Configuration registers, Fail-safe, Interrupt pin, Reset pin Rating Catalog Frequency (max) (MHz) 10 Operating temperature range (°C) -40 to 125
VSSOP (DGS) 32 39.69 mm² (8.1 mm × 4.9 mm) VQFN (RHB) 32 25 mm² (5 mm × 5 mm)
  • Operating supply voltage range of 1.65V to 5.5V
  • Low standby current consumption of 2.3µA typical
  • SPI SCLK Frequency
    • 10MHz from 3.3V to 5.5V
    • 5MHz from 1.65V to 5.5V
  • SPI daisy-chain supported
  • SPI read and write with burst mode
  • Multi-port SPI command to configure multiple ports simultaneously
  • IOFF supported input port pins
  • Active-low reset input (RESET)
  • Open-drain active-low interrupt output (INT)
    • Interrupt mask and status per I/O
    • Interrupt status per port
  • Built-in fail-safe I/O feature
  • Individual I/O configuration for
    • Input and Output function
    • Polarity inversion
    • Output push-pull and open-drain selection
    • Integrated pull-up or pull-down selection
    • Bus-hold feature to maintain last I/O state
    • Glitch filter enable selection
  • Latched outputs with 10mA drive capability for directly driving LEDs
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • ESD protection exceeds JESD 22
    • 2000V Human-body model (A114-A)
    • 1000V Charged-device model (C101)
  • Operating supply voltage range of 1.65V to 5.5V
  • Low standby current consumption of 2.3µA typical
  • SPI SCLK Frequency
    • 10MHz from 3.3V to 5.5V
    • 5MHz from 1.65V to 5.5V
  • SPI daisy-chain supported
  • SPI read and write with burst mode
  • Multi-port SPI command to configure multiple ports simultaneously
  • IOFF supported input port pins
  • Active-low reset input (RESET)
  • Open-drain active-low interrupt output (INT)
    • Interrupt mask and status per I/O
    • Interrupt status per port
  • Built-in fail-safe I/O feature
  • Individual I/O configuration for
    • Input and Output function
    • Polarity inversion
    • Output push-pull and open-drain selection
    • Integrated pull-up or pull-down selection
    • Bus-hold feature to maintain last I/O state
    • Glitch filter enable selection
  • Latched outputs with 10mA drive capability for directly driving LEDs
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • ESD protection exceeds JESD 22
    • 2000V Human-body model (A114-A)
    • 1000V Charged-device model (C101)

The TXE8124 devices provide general purpose parallel input/output (I/O) expansion for the four wire Serial Peripheral Interface (SPI) protocol and is designed for 1.65V to 5.5V VCC operation. The TXE8124 supports both standard point-to-point communication along with daisy-chaining of multiple devices.

The device supports 10MHz from 3.3V to 5.5V and 5MHz from 1.65V to 5.5V. I/O expanders, such as the TXE8124, are designed for when additional I/Os are needed for switches, sensors, push-buttons, LEDs, and fans.

The TXE8124 devices has 3 I/O ports of 8 IOs each, which include additional features designed to enhance the I/O performance in terms of speed, power consumption, and flexibility. These include per I/O programmable open-drain or push-pull outputs, programmable pull-up and pull-down resistors, bus-hold latchable inputs, maskable interrupt, interrupt status register, glitch filter and a fail-safe register mode which is enabled by the FAIL-SAFE pin.

The TXE8124 devices provide general purpose parallel input/output (I/O) expansion for the four wire Serial Peripheral Interface (SPI) protocol and is designed for 1.65V to 5.5V VCC operation. The TXE8124 supports both standard point-to-point communication along with daisy-chaining of multiple devices.

The device supports 10MHz from 3.3V to 5.5V and 5MHz from 1.65V to 5.5V. I/O expanders, such as the TXE8124, are designed for when additional I/Os are needed for switches, sensors, push-buttons, LEDs, and fans.

The TXE8124 devices has 3 I/O ports of 8 IOs each, which include additional features designed to enhance the I/O performance in terms of speed, power consumption, and flexibility. These include per I/O programmable open-drain or push-pull outputs, programmable pull-up and pull-down resistors, bus-hold latchable inputs, maskable interrupt, interrupt status register, glitch filter and a fail-safe register mode which is enabled by the FAIL-SAFE pin.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TXE8124 24-Bit SPI Bus I/O Expander with Interrupt Output, Reset Input, and I/O Configuration Registers datasheet PDF | HTML 30/03/2026
Nota sobre la aplicación How to Use SPI Daisy Chaining with TXE81XX Devices (Rev. A) PDF | HTML 8/05/2026
Información sobre seguridad funcional TXE8124 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 15/04/2026
Nota sobre la aplicación Discrete Active Cell Balancing Design PDF | HTML 29/10/2025
Application brief Understanding the SPI Bus PDF | HTML 22/08/2025
Nota sobre la aplicación How to Program TXE81XX SPI I/O Expander Family PDF | HTML 24/07/2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

IO-EXP-ADAPTER-EVM — Módulo de evaluación de adaptador expansor de E/S

El IO-EXP-ADAPTER-EVM es un módulo de evaluación que puede dividirse en cuatro PCB independientes para pruebas y depuración. El IO-EXP-ADAPTER-EVM es compatible con muchos tipos de encapsulados de nuestra gama de expansores I2C y SPI IO.
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

TXE81XXEVM — Módulo de evaluación TXE81XX

El TXE81XXEVM permite evaluar la familia TXE81XX de expansores de I/O SPI. Este EVM es compatible con TXE8116, TXE8124 y TXE8148 (16 bits, 24 bits y 48 bits, respectivamente) en el encapsulado con terminales DGS (24 y 32) y DGG (56). El EVM proporciona acceso a numerosos puntos de prueba y (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VSSOP (DGS) 32 Ultra Librarian
VQFN (RHB) 32 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos