Inicio Interfaz CIRCUITOS INTEGRADOS (IC) DE I2C, I3C Y SPI E/S de uso general (GPIO) I2C y SPI

TXE8148

ACTIVO

48-bit SPI bus I/O expander with interrupt, reset, and I/O configurable registers

Detalles del producto

Number of I/Os 48 Features Configuration registers, Fail-safe, Interrupt pin, Reset pin Supply voltage (min) (V) 1.65 Supply voltage (max) (V) 5.5 Rating Catalog Frequency (max) (MHz) 10 Operating temperature range (°C) -40 to 125
Number of I/Os 48 Features Configuration registers, Fail-safe, Interrupt pin, Reset pin Supply voltage (min) (V) 1.65 Supply voltage (max) (V) 5.5 Rating Catalog Frequency (max) (MHz) 10 Operating temperature range (°C) -40 to 125
TSSOP (DGG) 56 113.4 mm² 14 x 8.1
  • Functional Safety-Capable
  • Operating supply voltage range of 1.65V to 5.5V
  • Low standby current consumption of 6µA typical
  • 10MHz SPI SCLK frequency
  • SPI daisy-chain supported
  • SPI read and write with burst mode
  • Multi-port SPI command to configure multiple ports simultaneously
  • IOFF supported input port pins
  • Active-low reset input (RESET)
  • Open-drain active-low interrupt output (INT)
    • Interrupt mask and status per I/O
    • Interrupt status per port
  • Built-in fail safe I/O feature
  • Individual I/O configuration for:
    • Input and output function
    • Polarity inversion
    • Output push-pull and open-drain selection
    • Integrated pullup or pulldown selection
    • Bus-hold feature to maintain last I/O state
    • Glitch filter enable selection
  • Latched outputs with 10mA drive capability for directly driving LEDs
  • Latch-up performance exceeds 100mA per AEC Q100-004
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • Functional Safety-Capable
  • Operating supply voltage range of 1.65V to 5.5V
  • Low standby current consumption of 6µA typical
  • 10MHz SPI SCLK frequency
  • SPI daisy-chain supported
  • SPI read and write with burst mode
  • Multi-port SPI command to configure multiple ports simultaneously
  • IOFF supported input port pins
  • Active-low reset input (RESET)
  • Open-drain active-low interrupt output (INT)
    • Interrupt mask and status per I/O
    • Interrupt status per port
  • Built-in fail safe I/O feature
  • Individual I/O configuration for:
    • Input and output function
    • Polarity inversion
    • Output push-pull and open-drain selection
    • Integrated pullup or pulldown selection
    • Bus-hold feature to maintain last I/O state
    • Glitch filter enable selection
  • Latched outputs with 10mA drive capability for directly driving LEDs
  • Latch-up performance exceeds 100mA per AEC Q100-004
  • Latch-up performance exceeds 100mA per JESD 78, class II

The TXE8148 device provides general purpose parallel input/output (I/O) expansion for the four wire Serial Peripheral Interface (SPI) protocol and is designed for 1.65V to 5.5V VCC operation. The SPI protocol supports standard point-to-point communication along with daisy-chaining of multiple TXE8148.

The device supports SPI bus frequency of 10MHz from 1.65V to 5.5V. I/O expanders such as the TXE8148 provide a simple design when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and so on.

The TXE8148 has six I/O ports each with eight IOs per port, which include additional features designed to enhance the I/O performance in terms of speed, power consumption and EMI. These features include per I/O programmable open-drain or push-pull outputs, programmable pullup and pulldown resistors, bus-hold latchable inputs, maskable interrupt, interrupt status register, and a fail-safe register mode which is enabled by the FAIL-SAFE pin.

The TXE8148 device provides general purpose parallel input/output (I/O) expansion for the four wire Serial Peripheral Interface (SPI) protocol and is designed for 1.65V to 5.5V VCC operation. The SPI protocol supports standard point-to-point communication along with daisy-chaining of multiple TXE8148.

The device supports SPI bus frequency of 10MHz from 1.65V to 5.5V. I/O expanders such as the TXE8148 provide a simple design when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and so on.

The TXE8148 has six I/O ports each with eight IOs per port, which include additional features designed to enhance the I/O performance in terms of speed, power consumption and EMI. These features include per I/O programmable open-drain or push-pull outputs, programmable pullup and pulldown resistors, bus-hold latchable inputs, maskable interrupt, interrupt status register, and a fail-safe register mode which is enabled by the FAIL-SAFE pin.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet TXE8148 48-Bit SPI Bus I/O Expander With Interrupt Output, Reset Input, and I/O Configuration Registers datasheet PDF | HTML 26 jun 2026
Functional safety information TXE8148 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 08 may 2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

IO-EXP-ADAPTER-EVM — Módulo de evaluación de adaptador expansor de E/S

El IO-EXP-ADAPTER-EVM es un módulo de evaluación que puede dividirse en cuatro PCB independientes para pruebas y depuración. El IO-EXP-ADAPTER-EVM es compatible con muchos tipos de encapsulados de nuestra gama de expansores I2C y SPI IO.
Guía del usuario: PDF | HTML
Placa de evaluación

TXE81XXEVM — Módulo de evaluación TXE81XX

El TXE81XXEVM permite evaluar la familia TXE81XX de expansores de I/O SPI. Este EVM es compatible con TXE8116, TXE8124 y TXE8148 (16 bits, 24 bits y 48 bits, respectivamente) en el encapsulado con terminales DGS (24 y 32) y DGG (56). El EVM proporciona acceso a numerosos puntos de prueba y (...)

Guía del usuario: PDF | HTML
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (DGG) 56 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos