この製品には新バージョンがあります
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
CC2650
- Microcontroller
- Powerful ARM® Cortex®-M3
- EEMBC CoreMark® Score: 142
- Up to 48-MHz Clock Speed
- 128KB of In-System Programmable Flash
- 8KB of SRAM for Cache
- 20KB of Ultralow-Leakage SRAM
- 2-Pin cJTAG and JTAG Debugging
- Supports Over-The-Air Upgrade (OTA)
Ultralow-Power Sensor Controller - Can Run Autonomous From the Rest of the System
- 16-Bit Architecture
- 2KB of Ultralow-Leakage SRAM for Code and Data
- Efficient Code Size Architecture, Placing Drivers, Bluetooth® Low Energy Controller, IEEE 802.15.4 MAC, and Bootloader in ROM
- RoHS-Compliant Packages
- 4-mm × 4-mm RSM VQFN32 (10 GPIOs)
- 5-mm × 5-mm RHB VQFN32 (15 GPIOs)
- 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
- Peripherals
- All Digital Peripheral Pins Can Be Routed to Any GPIO
- Four General-Purpose Timer Modules
(Eight 16-Bit or Four 32-Bit Timers, PWM Each) - 12-Bit ADC, 200-ksamples/s, 8-Channel Analog MUX
- Continuous Time Comparator
- Ultralow-Power Analog Comparator
- Programmable Current Source
- UART
- 2× SSI (SPI, MICROWIRE, TI)
- I2C
- I2S
- Real-Time Clock (RTC)
- AES-128 Security Module
- True Random Number Generator (TRNG)
- 10, 15, or 31 GPIOs, Depending on Package Option
- Support for Eight Capacitive-Sensing Buttons
- Integrated Temperature Sensor
- External System
- On-Chip internal DC-DC Converter
- Very Few External Components
- Seamless Integration With the SimpleLink CC2590 and CC2592 Range Extenders
- Pin Compatible With the SimpleLink CC13xx in 4-mm × 4-mm and 5-mm × 5-mm VQFN Packages
- Low Power
- Wide Supply Voltage Range
- Normal Operation: 1.8 to 3.8 V
- External Regulator Mode: 1.7 to 1.95 V
- Active-Mode RX: 5.9 mA
- Active-Mode TX at 0 dBm: 6.1 mA
- Active-Mode TX at +5 dBm: 9.1 mA
- Active-Mode MCU: 61 µA/MHz
- Active-Mode MCU: 48.5 CoreMark/mA
- Active-Mode Sensor Controller: 8.2 µA/MHz
- Standby: 1 µA (RTC Running and RAM/CPU Retention)
- Shutdown: 100 nA (Wake Up on External Events)
- Wide Supply Voltage Range
- RF Section
- 2.4-GHz RF Transceiver Compatible With Bluetooth Low Energy (BLE) 4.2 Specification and IEEE 802.15.4 PHY and MAC
- Excellent Receiver Sensitivity (–97 dBm for BLE and –100 dBm for 802.15.4), Selectivity, and Blocking Performance
- Link budget of 102 dB/105 dB (BLE/802.15.4)
- Programmable Output Power up to +5 dBm
- Single-Ended or Differential RF Interface
- Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
- ETSI EN 300 328 (Europe)
- EN 300 440 Class 2 (Europe)
- FCC CFR47 Part 15 (US)
- ARIB STD-T66 (Japan)
- Tools and Development Environment
- Full-Feature and Low-Cost Development Kits
- Multiple Reference Designs for Different RF Configurations
- Packet Sniffer PC Software
- Sensor Controller Studio
- SmartRF™ Studio
- SmartRF Flash Programmer 2
- IAR Embedded Workbench® for ARM
- Code Composer Studio™
All trademarks are the property of their respective owners.
The CC2650 device is a wireless MCU targeting Bluetooth, ZigBee® and 6LoWPAN, and ZigBee RF4CE remote control applications.
The device is a member of the CC26xx family of cost-effective, ultralow power, 2.4-GHz RF devices. Very low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications.
The CC2650 device contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main processor and a rich peripheral feature set that includes a unique ultralow power sensor controller. This sensor controller is ideal for interfacing external sensors and for collecting analog and digital data autonomously while the rest of the system is in sleep mode. Thus, the CC2650 device is ideal for applications within a whole range of products including industrial, consumer electronics, and medical.
The Bluetooth Low Energy controller and the IEEE 802.15.4 MAC are embedded into ROM and are partly running on a separate ARM Cortex-M0 processor. This architecture improves overall system performance and power consumption and frees up flash memory for the application.
The Bluetooth and ZigBee stacks are available free of charge from www.ti.com.
技術資料
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
BOOSTXL-CC2650MA — TI SimpleLink™ Bluetooth® low energy CC2650 モジュール BoosterPack™ プラグイン モジュール
SimpleLink™ Bluetooth® Low Energy CC2650 モジュール BoosterPack プラグイン モジュールを使用すると、 LaunchPad™ 開発キットに Bluetooth Low Energy を迅速かつ簡単に追加できます。CC2650 モジュール BoosterPack キットを MSP432™ マイコン (MCU) LaunchPad キットに差し込むだけで、すぐに始められます!開発を始めるためのソフトウェア例はこちらにあります。
CC2650 モジュール BoosterPack キットにはワイヤレス ネットワーク プロセッサ (...)
ALGO-3P-UISP1-TI — テキサス インスツルメンツのデバイス向けの Algocraft μISP1 プログラマ
μISP は、ホスト PC に接続する (RS-232、USB、LAN 接続が内蔵) かスタンドアロン モードで動作できます。
スタンドアロン モードでのプログラミング サイクルの実行は、単に START ボタンを押すか、複数の TTL 制御ラインを通して行われます。
そのコンパクトなサイズと汎用性により、本番環境、手動プロセス、自動プロセスへの簡単な組み込みが可能になります。
CC2650STK — SimpleLink™ Bluetooth Low Energy / マルチスタンダード SensorTag
Bluetooth Low Energy を使用すると、わずか 3 分でクラウドとの接続を確立してセンサ データをオンラインで利用可能にすることができます。SensorTag は購入時の状態で iOS / Android アプリから利用可能で、プログラミング経験が不要です。
(...)
TMDSEMU200-U — XDS200 USB デバッグ プローブ
XDS200 は、TI の組込みデバイスのデバッグに使用するデバッグ プローブ (エミュレータ) です。大半のデバイスでは、より新しく低コストな XDS110 (www.ti.com/tool/TMDSEMU110-U) の使用が推奨されます。XDS200 は、単一のポッドで IEEE1149.1、IEEE1149.7、SWD などの幅広い規格をサポートします。すべての XDS デバッグ プローブは、ETB (Embedded Trace Buffer、組込みトレース バッファ) 搭載のすべての Arm® と DSP プロセッサに対し、コア トレースとシステム トレースをサポートしています。
(...)
LB-3P-TRACE32-WIRELESS — ワイヤレスコネクティビティ用 Lauterbach TRACE32® デバッグシステム
LauterbachのTRACE32®ツールは最先端のハードウェア/ソフトウェアコンポーネントのスイートで、TIの多くのワイヤレスコネクティビティチップの分析、最適化、認証を実行できます。組込みシステム向けの世界的に有名なデバッグソリューションは、初期のシリコン開発前の段階から製品認証やトラブルシューティングに至る、あらゆる開発段階に最適なソリューションです。 フルオンチップブレークポイントのサポート、ランタイムメモリアクセス、フラッシュプログラミング、ベンチマークカウンタ。すべてをスクリプト可能で、開発者は同じテストシーケンスを何度も繰り返すことができます。Lauterbach (...)
TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger
TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)
ACROVIEW-3P-AP6000 — AP6000 programmer support all TI programmable chips, including EP Product, Power ICs, and Gauge ICs
AP6000, launched by Acroview, is a universal programmer designed to support TI ICs across all series. Leveraging Acroview's highly skilled algorithm R&D engineering team, it delivers the fastest chip support speed in the industry.The AP6000 is capable of programming 8 chips simultaneously, and (...)
ACROVIEW-3P-AP8000 — AP8000 Universal Programming System, including all TI programmable chips.
AP8000 is a leading technology platform of Universal Programming developed by Acroview. We have an accomplished team of algorithm R&D engineers, to offer the fastest chip support software development service among the industry. The AP8000 can support the programming of 8 chips simultaneously. (...)
ALGO-3P-WRITENOW — Algocraft WriteNow! プログラマ
WriteNow! インシステム プログラマのシリーズは、プログラミング業界で画期的なものです。このプログラマは、さまざまなメーカーの多数のデバイス (マイコン、メモリ、CPLD、およびその他のプログラマブル デバイス) に対応しており、ATE / 付属設備への組み込みが容易な小型サイズです。これらはスタンドアロンで動作、またはホスト PC に接続して動作し (RS-232、LAN、および USB 接続が内蔵)、使いやすいソフトウェア ユーティリティが付属しています。
CCSTUDIO — Code Composer Studio 統合開発環境(IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
CCSTUDIO-OPENOCD — OpenOCD Binary Releases
SENSOR-CONTROLLER-STUDIO — センサ・コントローラ・スタジオ
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, allowing for ultra-low power application design.
The tool generates a Sensor Controller Interface driver, which is a set of C source files to be compiled into the System CPU (ARM Cortex-M3/M4) (...)
SYSCONFIG — SysConfigのスタンドアロン・デスクトップ・バージョン
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
TSK-3P-VX-TOOLSET — Arm 向け TASKING VX-toolset
Arm 向け VX-toolset は、特定の Cortex-M および Cortex-R コア デバイス上のセーフティ クリティカルな組込みソフトウェア開発向けの認定取得済みコンパイラ ツールチェーンです。Eclipse IDE の統合、高度なマルチコア サポート、TASKING 社の BlueBox デバッガとの互換性を備えており、VX-toolset によって開発を簡略化できます。TÜV NORD によって ISO 26262 の最高レベル ASIL D と ISO 21434 への準拠を認証済み。
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
BLE-STACK-2-X — BLE-STACK - V2.2(CC2640 / CC2650 のサポート)
ARM® Cortex®-M3 ベースの各種ワイヤレス マイコン (MCU) で構成された TI の SimpleLink™ Bluetooth® Low Energy ファミリのこのロイヤリティ フリーの BLE-Stack には、Bluetooth 4.2 と Bluetooth 5 向けのフル機能の認証済みスタックが付属しているほか、シングル モード Bluetooth Low Energy (BLE) アプリケーションの開発をすぐに開始するのに必要なソフトウェアすべて、サンプル アプリケーション、資料も付属しています。
特長
- Bluetooth 5 で、2Mbps (...)
TIMAC — IEEE802.15.4 メディア・アクセス・コントローラ(MAC)ソフトウェア・スタック
TIMAC - IEEE802.15.4 Medium Access Control (MAC) Software Stack
To download the free tools download click the "Get Software" button above. By subscribing, we will be able to notify you of updates when they become available and provide instructions on how to perform the update.
SPRCAG5 — BOOSTXL-TLV8544PIR FIRMWARE
SIMPLELINK-SDK-BLUETOOTH-PLUGIN — SimpleLink™ マイコン SDK 向け Bluetooth プラグイン
FLASH-PROGRAMMER-2 — SmartRF フラッシュ・プログラマ v2
SmartRF フラッシュ・プログラマ 2 は、デバッグ / シリアル・インターフェイス経由で、ARM をベースとする TI (テキサス・インスツルメンツ) の低消費電力 RF ワイヤレス・マイコンのフラッシュ・メモリをプログラム (書き込む) する目的で使用できます。互換性については、サポート対象製品のリストをご覧ください。Uniflash は、各種 SimpleLink 製品のプログラミング (書き込み) にも使用できます。
SmartRF フラッシュ・プログラマは、TI (テキサス・インスツルメンツ) の8051 をベースとする低消費電力 RF (...)
UNIFLASH — ほとんどの TI 製マイコン(MCU)とミリ波センサに対応する UniFlash
UniFlash は、テキサス インスツルメンツの広範な CCStudio™ 開発エコシステムであり、マイコンやワイヤレス コネクティビティ デバイスが搭載しているオンチップ フラッシュと、テキサス インスツルメンツ製プロセッサ向けのオンボード フラッシュに対してプログラミング (書き込み) を行うためのソフトウェア ツールです。UniFlash には、グラフィカル インターフェイスとコマンド ライン インターフェイスの両方が備わっており、デスクトップまたはクラウドで実行できます。
UniFlash は CCStudio™ Developer Zone (...)
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
SmartRF Packet Sniffer 2
SmartRF Packet Sniffer 2 includes software and firmware to capture and display over-the-air packets. The capture device is connected to the PC via USB. SmartRF Packet Sniffer 2 supports the CC13xx and CC26xx family of devices as capture device and uses Wireshark for packet (...)
RF-RANGE-ESTIMATOR — RF Range Estimator
SENSORTAG-SW — CC2541 SensorTag ソフトウェア
The SensorTag includes an open hardware and software reference design for low cost and low power wireless IoT applications. The SensorTag is supplied with complete source code with everything you need to customize it for your application as well as source code examples for mobile apps.
SWRC258 — BLE Device Monitor (v2.9.0)
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx, CC23xx, and CC27xx devices
PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2
SmartRF Packet Sniffer 2
SmartRF Packet Sniffer 2 includes software and firmware to capture and display over-the-air packets. The capture device is connected to the PC via USB. SmartRF Packet Sniffer 2 supports the CC13xx and CC26xx family of devices as capture device and uses Wireshark for packet (...)
SMARTRF-STUDIO-7 — SmartRF スタジオ
SmartRF™ Studio は、RF システムの設計者が TI の CC1xxx と CC2xxx の各低消費電力 RF デバイス全般を設計するプロセスの初期段階で無線を簡単に評価するのに役立つ Windows アプリケーションです。構成レジスタの値とコマンドの生成、さらに RF システムの実用的なテストとデバッグを簡素化できます。
SmartRF Studio は、以下の TI デバイスをサポートしています。
リソース
3P-WIRELESS-MODULES — サードパーティ無線モジュール検索ツール
サード パーティーのワイヤレス モジュール検索ツールを使用すると、開発中の最終製品の仕様を満たす製品を特定し、製造に対応したワイヤレス モジュールを調達することができます。この検索ツールに掲載されているサード パーティーのモジュール ベンダ各社は、TI のワイヤレス コネクティビティ製品を活用したワイヤレス モジュールの設計や製造に関する専門知識がある独立系サード パーティー企業です。
SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices
SimpleLink ハードウェアの設計レビュー プロセスは、問い合わせの手段を提供します。その後、関連する設計に関するエキスパートと 1 対 1 で連絡、エキスパートはお客様の設計に対するレビューを実施し、役に立つフィードバックをお知らせします。レビューの依頼に関する 3 ステップのシンプルなプロセスと、関連する技術資料やリソースへのリンクは、こちらで見つかります。
開始
2.4GHz ハードウェア設計レビューを依頼する前に、設計に関する一般的な質問は TI の E2E forum に投稿してください。
Hardware Design Review Request Form (...)
多くの TI リファレンス デザインには、CC2650 があります。
TI のリファレンス デザイン セレクション ツールを使用すると、開発中のアプリケーションやパラメータとの適合度が最も高いデザインの確認と特定を進めることができます。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
| VQFN (RSM) | 32 | Ultra Librarian |
| VQFN (RGZ) | 48 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。