CDCLVP1204
- 2:4 Differential Buffer
- Selectable Clock Inputs Through Control Terminal
- Universal Inputs Accept LVPECL, LVDS, and
LVCMOS/LVTTL - Four LVPECL Outputs
- Maximum Clock Frequency: 2 GHz
- Maximum Core Current Consumption: 45 mA
- Very Low Additive Jitter: <100 fs, RMS in 10-kHz
to 20-MHz Offset Range:- 57 fs, RMS (typical) at 122.88 MHz
- 48 fs, RMS (typical) at 156.25 MHz
- 30 fs, RMS (typical) at 312.5 MHz
- 2.375-V to 3.6-V Device Power Supply
- Maximum Propagation Delay: 450 ps
- Maximum Output Skew: 15 ps
- LVPECL Reference Voltage, VAC_REF, Available
for Capacitive-Coupled Inputs - Industrial Temperature Range: –40°C to +85°C
- Supports 105°C PCB Temperature (Measured at
Thermal Pad) - ESD Protection Exceeds 2 kV (HBM)
The CDCLVP1204 is a highly versatile, low additive jitter buffer that can generate four copies of LVPECL clock outputs from one of two selectable LVPECL, LVDS, or LVCMOS inputs for a variety of communication applications. It has a maximum clock frequency up to 2 GHz. The CDCLVP1204 features an on-chip multiplexer (MUX) for selecting one of two inputs that can be easily configured solely through a control terminal. The overall additive jitter performance is less than 0.1 ps, RMS from 10 kHz to 20 MHz, and overall output skew is as low as 15 ps, making the device a perfect choice for use in demanding applications.
The CDCLVP1204 clock buffer distributes one of two selectable clock inputs (IN0, IN1) to four pairs of differential LVPECL clock outputs (OUT0, OUT3) with minimum skew for clock distribution. The CDCLVP1204 can accept two clock sources into an input multiplexer. The inputs can be LVPECL, LVDS, or LVCMOS/LVTTL.
The CDCLVP1204 is specifically designed for driving 50-Ω transmission lines. When driving the inputs in single-ended mode, the LVPECL bias voltage (VAC_REF) must be applied to the unused negative input terminal. However, for high-speed performance up to 2 GHz, differential mode is strongly recommended.
The CDCLVP1204 is characterized for operation from –40°C to +85°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | CDCLVP1204 Four LVPECL Output, High-Performance Clock Buffer datasheet (Rev. F) | PDF | HTML | 2015. 9. 3 | |
| 사용 설명서 | CDCLVP1204 User's Guide | 2009. 7. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
CDCLVP1204EVM — CDCLVP1204 평가 모듈
The CDCLVP1204 is a high-performance, low additive phase noise clock buffer. It has two universal input buffers that support either single-ended or differential clock inputs, selectable through a control pin. The device also features on-chip bias generators that can provide the LVPECL common-mode (...)
CLOCK-TREE-ARCHITECT — 클록 트리 아키텍트 프로그래밍 소프트웨어
클록 트리 아키텍트는 시스템 요구 사항에 따라 클록 트리 솔루션을 생성하여 설계 프로세스를 간소화하는 클록 트리 합성 툴입니다. 이 툴은 광범위한 클로킹 제품 데이터베이스에서 데이터를 가져와 시스템 수준의 다중 칩 클로킹 솔루션을 생성합니다.
PLLATINUMSIM-SW — PLL 루프 필터, 위상 잡음, 잠금 시간, 스퍼 시뮬레이션 툴
PLLATINUMSIM-SW는 사용자가 LMX 계열의 위상 고정 루프(PLL) 및 신시사이저를 포함하는 PLLatinum™ 집적 회로의 상세한 설계 및 시뮬레이션을 만들 수 있는 시뮬레이션 툴입니다.
TIDA-00234 — 2개 이상의 SFP+ 광학 포트가 있는 시스템을 위한 듀얼 채널 XAUI-SFI 레퍼런스 디자인
The TIDA-00234 XAUI to SFI reference design is intended for Enterprise and Service Provider Networking applications like Ethernet Switches and Routers that implement multiple 10G Ethernet compliant Optical (SFP+) ports. This reference design features the TLK10232 device which is the most compact (...)
TIDA-00269 — 기가비트 이더넷 링크 애그리게이터 레퍼런스 디자인
The Gigabit Ethernet Link Aggregator reference design features the TLK10081 device which is a multi-rate link aggregator intended for use in high-speed bi-directional point-to-point data transmission systems to reduce the number of physical links by multiplexing lower speed serial links into higher (...)
TIDA-00309 — 디스플레이 포트 비디오 4:1 애그리게이션 레퍼런스 디자인
This verified reference design is a complete four channel DisplayPort aggregation and de-aggregation solution. One TLK10022 is used to aggregate four synchronous DisplayPort (DP) sources together into one 10.8 Gbps serial link. The serial data is transferred via copper or optical fiber where a (...)
TIDA-00352 — SDI 비디오 애그리게이션 레퍼런스 디자인
This verified reference design is a complete four channel SDI aggregation and de-aggregation solution. One TLK10022 is used to aggregate four synchronous HD-SDI sources together into one 5.94 Gbps serial link. The serial data is transferred via copper or optical fiber where a second TLK10022 is (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGT) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.