DLP9500UV
- 0.95-Inch diagonal micromirror array
- 1920 × 1080 array of aluminum, micrometer-sized mirrors (1080p resolution)
- 10.8µm micromirror pitch
- ±12° micromirror tilt angle (relative to flat state)
- Designed for corner illumination
- Designed for use with UV light (363nm to 420nm):
- Window transmission 98% (Single Pass, Through Two Window Surfaces) (nominal)
- Micromirror reflectivity 88% (Nominal)
- Array diffraction efficiency 85% (Nominal)
- Array fill factor 94% (Nominal)
- Four 16-bit, low-voltage differential signaling (LVDS), double data rate (DDR) input data buses
- Up to 400MHz input data clock rate
- 42.2mm × 42.2mm × 7mm package footprint
- Hermetic package
DLP9500UV is a digitally controlled micro-electromechanical system (MEMS) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP9500UV can be used to modulate the amplitude, direction, and/or phase of incoming light.
The DLP95000UV chipset is a new digital micromirror device (DMD) addition to the DLP Discovery™ 4100 platform, which enables high resolution and high-performance spatial light modulation beyond the visible spectrum into the UVA spectrum (363nm to 420nm). The DLP9500UV DMD is designed with a special window that is optimized for UV transmission.
The DLP9500UV is the 0.95 1080p DMD, with a hermetic package, that is sold with a dedicated DLPC410 controller required for high-speed pattern rates of >23000Hz (1-bit binary) and >1700Hz (8-bit gray), one unit DLPR410 (DLP Discovery 4100 Configuration PROM), and two units DLPA200 (DMD micromirror drivers). Refer to the DLPC410, DLPA200, DLPR410, and DLP9500UV Functional Block Diagram.
Reliable function and operation of the DLP9500UV requires that it be used in conjunction with the other components of the chipset. A dedicated chipset provides developers with easier access to the DMD as well as high-speed, independent micromirror control.
DLP9500UV is a digitally controlled micro-electromechanical system (MEMS) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP9500UV can be used to modulate the amplitude, direction, and/or phase of incoming light.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DLPLCR95UVEVM — DLP9500UV DMD 평가 보드
DLPLCRC410EVM — DLPLCRC410 평가 모듈
DLI-3P-DLI41XX — DLP Discovery 칩셋용 DLi D4100, D4120, D4130 개발 키트
VISI-3P-LRS-HD-UV — Visitech LUXBEAM Rapid System HD UV
The LUXBEAM® Rapid System LRS-HD is a DLP® technology based stereolithography sub-system, specifically designed for single head scrolling motion 3D printing and Additive Manufacturing systems. With the robust and reliable high resolution DLP9500 chip, the LRS-HD variants UV, Hybrid (HY), (...)
VISI-3P-LRS-MCX-HD-UV — Visitech LUXBEAM Rapid System MCx HD UV
Offering the same performance as the LRS-HD light engines, the LUXBEAM® Rapid System LRS-MCx offers stackability of modules for stitched images down to 50 micron pixel pitch in image. This allows for highest manufacturing throughput for 3D printing with single pass linear motion systems. (...)
WDST-3P-W4100 — Wintech W4100 고속 개발 키트
VIALUX-3P-V-MODULES-410 — DLPC410용 ViALUX V 모듈
VIALUX-3P-DLP9500UV-I — DLP9500UV을 사용하는 산업용 ViALUX GmbH 광학 모듈
VISI-3P-LITHOGRAPHY — VISITECH LUXBEAM 리소그래피 시스템
VISI-3P-LUXBEAM-RAPID — Visitech Luxbeam® Rapid System LRS
VISI-3P-LUXBEAM4600 — VISITECH LUXBEAM 4600 DLP 포맷터 보드
VIALUX-3P-ALP-4 — DLPLCRC410 용 ViALUX ALP-4.1 컨트롤러 소프트웨어 제품군 평가 모듈
DLP9000 DLP9500 Type A Mounting Concept with Tight Part Tolerances (Rev. A)
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
지원되는 제품 및 하드웨어
제품
멀티 채널 IC(PMIC)
홈 시네마, 비즈니스 및 교육 DMD
휴대용 및 소비자용 DMD
UV(<420nm) DMD
Pro-AV 및 대형 공간 DMD
외부 조명 및 프로젝션 DMD
NIR(>700nm) DMD
내부 디스플레이 DMD
가시광선(420~700nm) DMD
DLP 컨트롤러 및 드라이버
하드웨어 개발
평가 보드
개발 키트
지원 소프트웨어
DLPR106 — TypeA 9Size Traditional DMD Mounting and Electrical Interconnect Information
지원되는 제품 및 하드웨어
제품
가시광선(420~700nm) DMD
UV(<420nm) DMD
DLI-3P-ACCESSORIES — DLP® 제품용 DLi 액세서리 및 어셈블리
- (...)
DLP-OMM-SEARCH — DLP® 제품 광학 모듈 검색 툴
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
지원되는 제품 및 하드웨어
제품
멀티 채널 IC(PMIC)
홈 시네마, 비즈니스 및 교육 DMD
휴대용 및 소비자용 DMD
UV(<420nm) DMD
Pro-AV 및 대형 공간 DMD
외부 조명 및 프로젝션 DMD
NIR(>700nm) DMD
내부 디스플레이 DMD
가시광선(420~700nm) DMD
DLP 컨트롤러 및 드라이버
하드웨어 개발
평가 보드
개발 키트
지원 소프트웨어
DLPR410-IBIS — DLPR410 IBIS 모델
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DLP-TYPEA.9 (FLN) | 355 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치