OPA2607

활성

듀얼 채널, 저전력, 정밀, 50MHz 비보상 CMOS 연산 증폭기

제품 상세 정보

Architecture FET / CMOS Input, Voltage FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.2 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 GBW (typ) (MHz) 50 BW at Acl (MHz) 2.5 Acl, min spec gain (V/V) 6 Slew rate (typ) (V/µs) 24 Vn at flatband (typ) (nV√Hz) 3.8 Vn at 1 kHz (typ) (nV√Hz) 5.3 Iq per channel (typ) (mA) 0.9 Vos (offset voltage at 25°C) (max) (mV) 0.6 Rail-to-rail In to V-, Out Features Decompensated, Shutdown Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 100 Input bias current (max) (pA) 10 Offset drift (typ) (µV/°C) 0.3 Iout (typ) (mA) 20 2nd harmonic (dBc) -105 3rd harmonic (dBc) -95 Frequency of harmonic distortion measurement (MHz) 0.02
Architecture FET / CMOS Input, Voltage FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.2 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.5 GBW (typ) (MHz) 50 BW at Acl (MHz) 2.5 Acl, min spec gain (V/V) 6 Slew rate (typ) (V/µs) 24 Vn at flatband (typ) (nV√Hz) 3.8 Vn at 1 kHz (typ) (nV√Hz) 5.3 Iq per channel (typ) (mA) 0.9 Vos (offset voltage at 25°C) (max) (mV) 0.6 Rail-to-rail In to V-, Out Features Decompensated, Shutdown Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 100 Input bias current (max) (pA) 10 Offset drift (typ) (µV/°C) 0.3 Iout (typ) (mA) 20 2nd harmonic (dBc) -105 3rd harmonic (dBc) -95 Frequency of harmonic distortion measurement (MHz) 0.02
SOIC (D) 8 29.4 mm² 4.9 x 6 VSSOP (DGK) 8 14.7 mm² 3 x 4.9 X2QFN (RUG) 10 3 mm² 1.5 x 2
  • Gain Bandwidth Product (GBW): 50 MHz
  • Quiescent Current: 900 µA (Typical)
  • Broadband Noise: 3.8 nV/√Hz
  • Input Offset Drift: 1.5 µV/°C (Maximum)
  • Offset Voltage: 120 µV (Typical)
  • Input Bias Current: 10 pA (Maximum)
  • Rail-to-Rail Output (RRO)
  • Decompensated, Gain ≥ 6 V/V (Stable)
  • Power Down Current: 1 µA (Maximum)
  • Supply Range: 2.2 V to 5.5 V
  • Gain Bandwidth Product (GBW): 50 MHz
  • Quiescent Current: 900 µA (Typical)
  • Broadband Noise: 3.8 nV/√Hz
  • Input Offset Drift: 1.5 µV/°C (Maximum)
  • Offset Voltage: 120 µV (Typical)
  • Input Bias Current: 10 pA (Maximum)
  • Rail-to-Rail Output (RRO)
  • Decompensated, Gain ≥ 6 V/V (Stable)
  • Power Down Current: 1 µA (Maximum)
  • Supply Range: 2.2 V to 5.5 V

The OPA607 and OPA2607 devices are decompensated, minimum gain of 6 V/V stable, general-purpose CMOS operational amplifier with low noise of 3.8 nV/√ Hz and a GBW of 50 MHz. The low noise and wide bandwidth of the OPAx607 devices make them attractive for general-purpose applications which require a good balance between cost and performance. The high-impedance CMOS inputs make the OPAx607 devices an ideal amplifier to interface with sensors with high output impedance (for example, piezoelectric transducers).

The OPAx607 devices feature a Power Down mode with a maximum quiescent current of less than 1 µA, making the device suitable for use in portable battery-powered applications. The rail-to-rail output (RRO) of the OPAx607 devices can swing up to 8 mV from the supply rails, maximizing dynamic range.

The OPAx607 is optimized for low supply voltage operation as low as 2.2 V (±1.1 V) and up to 5.5 V (±2.75 V), and is specified over the temperature range of –40°C to +125°C.

The OPA607 and OPA2607 devices are decompensated, minimum gain of 6 V/V stable, general-purpose CMOS operational amplifier with low noise of 3.8 nV/√ Hz and a GBW of 50 MHz. The low noise and wide bandwidth of the OPAx607 devices make them attractive for general-purpose applications which require a good balance between cost and performance. The high-impedance CMOS inputs make the OPAx607 devices an ideal amplifier to interface with sensors with high output impedance (for example, piezoelectric transducers).

The OPAx607 devices feature a Power Down mode with a maximum quiescent current of less than 1 µA, making the device suitable for use in portable battery-powered applications. The rail-to-rail output (RRO) of the OPAx607 devices can swing up to 8 mV from the supply rails, maximizing dynamic range.

The OPAx607 is optimized for low supply voltage operation as low as 2.2 V (±1.1 V) and up to 5.5 V (±2.75 V), and is specified over the temperature range of –40°C to +125°C.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TLV2365 활성 50MHz 단일 공급 레일 투 레일 연산 증폭기 Unity gain stable and rail-to-rail input for cost-optimized designs

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
4개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet OPAx607 50-MHz, Low-Power, Gain of 6-V/V Stable, Rail-to-Rail Output CMOS for Co datasheet (Rev. J) 2021/04/16
Product overview High Speed Amplifiers for In-Vitro Diagnostics (IVD) Analog Front End PDF | HTML 2025/04/10
Technical article 3 common questions when designing with high-speed amplifiers PDF | HTML 2020/07/17
User guide DEM-OPA-SO-2A User's Guide (Rev. B) 2010/04/30

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DEM-OPA-SO-2A — SO-8 패키지용 듀얼 연산 증폭기 평가 모듈

The DEM-OPA-SO-2A demonstration evaluation module helps designers evaluate the operation and performance of TI dual-channel, high-speed, wideband operational amplifiers. This unpopulated printed-circuit board (PCB) is compatible with products offered in the 8-lead SOIC (D) package.

For more (...)

사용 설명서: PDF
TI.com에서 구매할 수 없음
계산 툴

ANALOG-ENGINEER-CALC PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
시뮬레이션 툴

TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
사용 설명서: PDF
레퍼런스 디자인

TIDA-010203 — C2000 및 GaN을 지원하는 4kW 단상 토템 폴 PFC 레퍼런스 디자인

이 레퍼런스 설계는 F280049/F280025 제어 카드 및 LMG342x EVM 보드를 지원하는 4kW CCM 토템 폴 PFC입니다. 이 설계는 컨트롤러의 접지를 MOSFET 레그 중간에 배치하여 절연 전류 센스를 방지하는 견고한 PFC 솔루션을 보여줍니다. 비절연의 이점을 제공하는 AC 전류 센스는 고속 증폭기 OPA607을 통해 구현하여 안정적인 과전류 방지를 실현하는 데 도움이 됩니다. 이 설계에서는 효율성, 열 이미지, AC 강하, 조명 서지 및 EMI CE가 완전히 검증되었습니다. 테스트 데이터가 완비된 이 레퍼런스 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-060019 — 고속 전류 션트 모니터 레퍼런스 설계

이 레퍼런스 설계는 고속 증폭기를 사용하는 저압측 양방향 전류 션트 모니터입니다. 더 빠른 오류 감지, 단일 션트 모터 제어, 더 높은 스위칭 주파수, 더 높은 게인 또는 감소된 일반 ADC 샘플링 잡음의 이점을 활용할 수 있는 애플리케이션에 적합합니다. 이 설계는 10V/V의 게인으로 1mΩ 션트를 모니터링하기 위해 OPA365-Q1, OPA2836-Q1 및 OPA607을 사용합니다. 기본 구성은 최대 45A 시스템용이며, 2.2V~5.5V의 Vcc 범위에서 최대 ±50x Vcc의 과도 현상을 정확하게 감지합니다. 기본 구성은 (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (D) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian
X2QFN (RUG) 10 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상