OPA593
- Wide power-supply range:
- 8 V (±4 V) to 85 V (±42.5 V)
- Low offset voltage: ±20 µV
- Low offset voltage drift: ±0.4 µV/°C
- High output current: 250 mA
- Wide gain bandwidth: 10 MHz
- High slew rate: 45 V/µs, rising
- Low noise: 7 nV/√Hz at 10 kHz
- Mux-friendly inputs
- Rail-to-rail output
- Quiescent current:
- Enabled: 3.25 mA
- Disabled: 250 µA
- Specified current limit accuracy
- Overtemperature and overcurrent flags
- Temperature range: –40°C to +125°C
- Package: 12-pin WSON
The OPA593 is a high-voltage (85 V), high-precision, wide-bandwidth (10 MHz), high-output-current (250 mA), unity-gain-stable, power op amp.
The OPA593 uses a laser trimming technique to improve the offset voltage (20 µV, typical) and offset voltage drift (0.4 µV/°C, typical), and thus avoids the need for calibration. This device features mux-friendly inputs that enable differential input voltage range to the supply rails and help improve settling performance in multichannel systems.
An external resistor can be used to limit the current with specified accuracy, and thus provide more precise measurements. In case of an overcurrent or overtemperature condition, the device indicates erroneous operation through a status flag. An included disable feature is used to shutdown the device, saving power and placing the output into a high-impedance state.
The device is unity-gain stable, enabling operation as a high-impedance buffer. The wide bandwidth and high slew enable high signal gains. The high output current and capacitive drive allow the device to drive external field-effect transistors (FETs) used to provide higher system currents, such as in a digital power supply.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPA593 85-V, 250-mA Output Current, Precision, Power Op Amp datasheet (Rev. C) | PDF | HTML | 2022. 12. 23 | |
| 애플리케이션 노트 | Optimizing Dual Feedback Compensation in the OPA593 With a Current Booster for 1μF Capacitive Loads in ATE App | PDF | HTML | 2024. 11. 19 | ||
| Application brief | Paralleling the OPA593 High-Voltage, High-Current Op Amp for 2 × Output Current (Rev. A) | PDF | HTML | 2023. 1. 9 | ||
| Application brief | How Do I Achieve a More Accurate Current Limit and Avoid Damaging My DUT? | PDF | HTML | 2022. 3. 10 | ||
| 인증서 | OPA593EVM EU RoHS Declaration of Conformity (DoC) | 2021. 10. 26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
OPA593EVM — OPA593 평가 모듈 85V, 250mA 출력 전류 정밀 연산 증폭기
OPA593EVM 평가 모듈(EVM)은 OPA593 고접압 고전류 연산 증폭기 평가를 위한 플랫폼을 제공합니다. 다중 구성품 풋프린트로, 향상된 하울랜드(Howland) 전류 펌프를 포함해 가장 흔히 사용되는 연산 증폭기 회로 구성이 가능합니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
OPAMP-NOISECALC — Noise Calculator
This folder contains three tools to help in understandning and managing noise in cicuits. The included tools are:
- A noise generator tool - This is a Lab View 4-Run Time executable that generates Gaussian white noise, uniform white noise, 1/f noise, short noise, and 60Hz line noise. Temporal data, (...)
TIDA-010962 — ATE(자동 테스트 장비) 80V 개별 부동 VI 레퍼런스 설계
이 레퍼런스 설계는 4사분면 개별 부동 전압 및 전류(VI) 설계를 나타낸 것입니다. 전압 출력은 ±40V 및 0V~80V 범위를 지원하며, 전류 범위는 500mA, 10mA, 10μA의 세 가지입니다. 이 설계는 아날로그 피드백 루프를 지원하며 FV(강제 전압), FI(강제 전류), 버퍼, 갱 모드에서 작동합니다. 이 레퍼런스 설계는 20비트 강제 DAC(디지털-아날로그 컨버터), 18비트, 2채널 ADC(아날로그-디지털 컨버터) 및 정밀 신호 체인을 사용해 보정 후 제어 측정에 0.01%의 정확도를 달성합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DNT) | 12 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.