OPA690
- Unity-gain stable: 535MHz (G = 1V/V)
- High output current: 215mA
- High slew rate: 1900V/µs
- Low input voltage noise: 4.6nV/√Hz
- Low distortion (RL = 100Ω, VO = 2VPP):
- HD2, HD3 at 5MHz: –85dBc, –75dBc
- Output voltage swing: ±3.9V
- Low supply current: 6.1mA
- Low disable current: 100µA
- Supply range: 5V to 12V
The OPA690 device represents a major step forward in unity-gain stable, voltage-feedback op amps. A new input architecture provides slew rate and full-power bandwidth previously found only in wide-band, current-feedback op amps. A new output stage architecture delivers 215mA of current with a minimal headroom requirement. These capabilities combine to give exceptional slew rate of 1900V/µs into a 100Ω load. The ultra-fast settling time of 13ns makes the OPA690 an excellent choice for fast sampling systems such as high-speed ADC drivers, high-speed imaging systems, and current DAC transimpedance amplifier.
The low quiescent current of 6.1mA makes the OPA690 an excellent choice in portable or battery-powered application. System power can be reduced further using the optional disable control pin (DIS). Leaving DIS open, or holding DIS high, operates the OPA690 normally. If DIS is pulled low, the OPA690 supply current drops to less than 100µA while the output goes to a high-impedance state.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPA690 Wideband, Voltage-Feedback Operational Amplifier With Disable datasheet (Rev. H) | PDF | HTML | 2024. 10. 4 | |
| 애플리케이션 노트 | Input Voltage Effects on Slew Rate for Voltage and Current Feedback Amplifiers | PDF | HTML | 2025. 1. 15 | ||
| e북 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017. 3. 28 | ||
| 애플리케이션 노트 | RLC Filter Design for ADC Interface Applications (Rev. A) | 2015. 5. 13 | |||
| 사용 설명서 | DEM-OPA-SO-1A User's Guide (Rev. B) | 2012. 4. 12 | |||
| 사용 설명서 | DEM-OPA-SOT-1A User's Guide (Rev. B) | 2012. 4. 12 | |||
| 애플리케이션 노트 | A Numerical Solution to an Analog Problem | 2010. 4. 25 | |||
| 애플리케이션 노트 | Noise Analysis for High Speed Op Amps (Rev. A) | 2005. 1. 17 | |||
| 애플리케이션 노트 | ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers | 2004. 4. 22 | |||
| 애플리케이션 노트 | Measuring Board Parasitics in High-Speed Analog Design | 2003. 7. 7 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-OPA-SO-1A — SO-8 패키지용 단일 연산 증폭기 평가 모듈
The DEM-OPA-SO-1A demonstration fixture helps designers evaluate the operation and performance of TI's High Speed, Wide Bandwidth Operational Amplifiers. This unpopulated PC board is compatible with products offered in the 8-lead SOIC (D) package.
DEM-OPA-SOT-1A — SOT-23 5핀 및 6핀 패키지용 단일 연산 증폭기 평가 모듈
DEM-OPA-SOT-1A는 고속 광대역 연산 증폭기의 작동 및 성능을 평가하는 데모 보드입니다. 채워지지 않은 이 PC 보드는 소형 아웃라인 트랜지스터(SOT) DBV 패키지로 제공되는 제품과 호환됩니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |