홈 센서 Optical sensors 주변광 센서
홈
센서
Optical sensors
주변광 센서

OPT3001-Q1

활성

사람의 시각 반응에 정확하게 대응하는 ALS(오토모티브 디지털 주변광 센서)

지금 주문
데이터 시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
OPT4001-Q1 활성 오토모티브 고속, 고정밀 디지털 ALS(주변 광 센서) Increased speed and resolution

OPT3001-Q1

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Automotive Operating temperature range (°C) -40 to 105 Applications Automotive Infotainment
Rating Automotive Operating temperature range (°C) -40 to 105 Applications Automotive Infotainment
USON (DNP) 6 4 mm² 2 x 2
  • AEC-Q100 Qualified for Automotive Devices
    • Device Temperature Grade 2: –40°C to +105°C Ambient Operating Temperature
    • Device Temperature Grade 3: –40°C to +85°C Ambient Operating Temperature
  • Precision Optical Filtering to Match Human Eye:
    • Rejects > 99% (Typical) of IR
  • Automatic Full-Scale Setting Feature Simplifies Software and Ensures Proper Configuration
  • Measurements: 0.01 Lux to 83k Lux
  • 23-Bit Effective Dynamic Range With
    Automatic Gain Ranging
  • 12 Binary-Weighted Full-Scale Range Settings:
    < 0.2% (Typical) Matching Between Ranges
  • Low Operating Current: 1.8 µA (Typical)
  • Operating Temperature Range (Grade 2): –40°C to +105°C
  • Operating Temperature Range (Grade 3): –40°C to +85°C
  • Functional Temperature Range: –40°C to 105°C
  • Wide Power-Supply Range: 1.6 V to 3.6 V
  • 5.5-V Tolerant I/O
  • Flexible Interrupt System
  • Small-Form Factor: 2 mm × 2 mm × 0.65 mm
  • AEC-Q100 Qualified for Automotive Devices
    • Device Temperature Grade 2: –40°C to +105°C Ambient Operating Temperature
    • Device Temperature Grade 3: –40°C to +85°C Ambient Operating Temperature
  • Precision Optical Filtering to Match Human Eye:
    • Rejects > 99% (Typical) of IR
  • Automatic Full-Scale Setting Feature Simplifies Software and Ensures Proper Configuration
  • Measurements: 0.01 Lux to 83k Lux
  • 23-Bit Effective Dynamic Range With
    Automatic Gain Ranging
  • 12 Binary-Weighted Full-Scale Range Settings:
    < 0.2% (Typical) Matching Between Ranges
  • Low Operating Current: 1.8 µA (Typical)
  • Operating Temperature Range (Grade 2): –40°C to +105°C
  • Operating Temperature Range (Grade 3): –40°C to +85°C
  • Functional Temperature Range: –40°C to 105°C
  • Wide Power-Supply Range: 1.6 V to 3.6 V
  • 5.5-V Tolerant I/O
  • Flexible Interrupt System
  • Small-Form Factor: 2 mm × 2 mm × 0.65 mm

The OPT3001-Q1 device is an optical sensor that measures the intensity of visible light. The spectral response of the sensor tightly matches the photopic response of the human eye and includes significant infrared rejection.

The OPT3001-Q1 device is a single-chip lux meter, measuring the intensity of light as visible by the human eye. The precision spectral response and strong IR rejection of the device enables the OPT3001-Q1 device to accurately meter the intensity of light as seen by the human eye, regardless of light source. The strong IR rejection also aids in maintaining high accuracy when industrial design calls for mounting the sensor under dark glass for aesthetics. The OPT3001-Q1 device is designed for systems that create light-based experiences for humans, and an ideal preferred replacement for photodiodes, photoresistors, or other ambient light sensors with less human eye matching and IR rejection.

The digital operation is flexible for system integration. Measurements can be either continuous or single-shot. The control and interrupt system features autonomous operation, allowing the processor to sleep while the sensor searches for appropriate wake-up events to report through the interrupt pin. The digital output is reported over an I2C- and SMBus-compatible, two-wire serial interface.

The low-power consumption and low-power supply voltage capability of the OPT3001-Q1 device enhance the battery life of battery-powered systems.

Measurements can be made from 0.01 lux up to 83k lux, without manually selecting full-scale ranges, by using the built-in, full-scale setting feature. This capability allows light measurement over a 23-bit effective dynamic range.

The OPT3001-Q1 device is an optical sensor that measures the intensity of visible light. The spectral response of the sensor tightly matches the photopic response of the human eye and includes significant infrared rejection.

The OPT3001-Q1 device is a single-chip lux meter, measuring the intensity of light as visible by the human eye. The precision spectral response and strong IR rejection of the device enables the OPT3001-Q1 device to accurately meter the intensity of light as seen by the human eye, regardless of light source. The strong IR rejection also aids in maintaining high accuracy when industrial design calls for mounting the sensor under dark glass for aesthetics. The OPT3001-Q1 device is designed for systems that create light-based experiences for humans, and an ideal preferred replacement for photodiodes, photoresistors, or other ambient light sensors with less human eye matching and IR rejection.

The digital operation is flexible for system integration. Measurements can be either continuous or single-shot. The control and interrupt system features autonomous operation, allowing the processor to sleep while the sensor searches for appropriate wake-up events to report through the interrupt pin. The digital output is reported over an I2C- and SMBus-compatible, two-wire serial interface.

The low-power consumption and low-power supply voltage capability of the OPT3001-Q1 device enhance the battery life of battery-powered systems.

Measurements can be made from 0.01 lux up to 83k lux, without manually selecting full-scale ranges, by using the built-in, full-scale setting feature. This capability allows light measurement over a 23-bit effective dynamic range.
filter 기타 주변광 센서 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
8개 모두 보기
유형 직함 날짜
* Data sheet OPT3001-Q1 Ambient Light Sensor (ALS) datasheet (Rev. A) PDF | HTML 2018/12/20
Certificate OPT3001DTSQ1EVM EU Declaration of Conformity (DoC) 2024/11/13
EVM User's guide LIGHTSOURCE01EVM Light Source EVM User's Guide (Rev. A) PDF | HTML 2024/09/11
Application brief How to Select a Light Sensor for Your Application (Rev. C) PDF | HTML 2024/01/19
Application note Standalone Evaluation Platform for TI Light Sensors (Rev. A) PDF | HTML 2023/07/21
Application brief Using Digital Output Ambient Light Sensors for Automotive Displays 2019/06/27
Application brief OPT3001/-Q1:Automatic control of Display backlight using an Ambient Light Sensor 2017/08/18
EVM User's guide OPT3001EVM User's Guide (Rev. A) 2014/10/14

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

OPT3001EVM — 인체의 눈에 정확하게 반응하는 OPT3001 ALS(디지털 주변광 센서) 평가 모듈

The OPT3001 is an ambient light sensor (ALS) with a digital output integrated circuit.  It uses a two-wire interface that works with the I2C protocol making it ideal for many applications.  The OPT3001EVM is a platform for evaluating the performance of the OPT3001 under various (...)

사용 설명서: PDF
TI.com에서 구매 불가
개발 키트

LIGHTSOURCE01EVM — TI 주변광 센서 평가 모듈의 보정을 위한 안정적인 광원

LIGHTSOURCE01EVM은 주변광 센서(ALS) 및 컬러 센서의 보정에 사용되는 안정적이고 균일한 광원입니다. 이 광원은 생산 환경에서 TI 광 센서를 포함한 최종 제품을 보정 및 테스트하는 데 사용하도록 설계되었습니다. 이 안정화 광원은 일몰(4200K CCT) 및 정오(6400K CCT) 조명 모드를 시뮬레이션하는 데 사용할 수 있습니다. 광원은 균일하고 일정하며 시간이 지남에 따라 광출력이 ±1% 미만이고 직경이 1인치 면적에 균일성이 ±1% 미만입니다. 조명 수준 및 모드는 광원 EVM GUI를 사용하여 조정할 수 (...)

사용 설명서: PDF | HTML
요청
레퍼런스 디자인

TIDA-020010 — HMI를 지원하는 오토모티브 HVAC 제어 레퍼런스 설계

This reference design offers a cost-effective solution for a heating, ventilation, and air conditioning (HVAC) human-machine interface (HMI) application. This reference design incorporates a synchronous step-down converter, multiple channel half-bridge motor driver for brushed DC motors (BDC), (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01500 — HVAC HMI를 위한 오토모티브 멀티 채널 LED 드라이버 레퍼런스 설계

In HVAC (heating, ventilation, and air conditioning) HMI (human machine interface) the displays and buttons are illuminated with many of LEDs. The drive circuit for these LEDs are traditionally realized in a discreet way so that an MCU drives external low side BJTs that sink current, limited by (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-020001 — 오토모티브 144존 로컬 밝기 조절 백라이트 레퍼런스 설계

This local dimming backlight reference design conserves power, extends the life of liquid-crystal displays (LCDs), and enhances automotive display quality through high dynamic range (HDR) or localized dimming technology. Seven multi-channel constant-current LED drivers allow for 144-zone localized (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01539 — 전기변색 미러용 차량용 자동 밝기 조절 미러 레퍼런스 설계

Modern vehicles utilize auto-dimming mirrors to prevent glare and visibility loss for the driver. This reference design utilizes modern human-eye-response ambient light sensors and a high-current amplifier stage to drive a capacitive electrochromic mirror load.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01008 — 온도 센서가 탑재된 광학 감지 백라이트 레퍼런스 설계

This reference design conserves power and extends life of LCD and backlight by adjusting the backlight brightness relative to the ambient light level. The capTIvate touch slider allows the brightness to be finetuned per the user's brightness preference. The sensitive thermal requirements of the (...)
Design guide: PDF
회로도: PDF
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
USON (DNP) 6 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상