SN74HC595
- 8-bit serial-in, parallel-out shift
- Wide operating voltage range of 2 V to 6 V
- High-current 3-state outputs can drive up to 15 LSTTL loads
- Low power consumption: 80-µA (maximum) ICC
- tpd = 13 ns (typical)
- ±6-mA output drive at 5 V
- Low input current: 1 µA (maximum)
- Shift register has direct clear
- On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
The SNx4HC595 devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state.
기술 문서
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
14-24-LOGIC-EVM — 14핀~24핀 D, DB, DGV, DW, DYY, NS 및 PW 패키지용 로직 제품 일반 평가 모듈
14-24-LOGIC-EVM 평가 모듈(EVM)은 14핀~24핀 D, DW, DB, NS, PW, DYY 또는 DGV 패키지에 있는 모든 로직 장치를 지원하도록 설계되었습니다.
BOOSTXL-ULN2003 — ULN2003 alc CSD17571Q2 NexFET™를 지원하는 듀얼 스테퍼 모터 드라이버 부스터팩
The BOOSTXL-ULN2003 is 2A stepper motor driver kit which features TI's ULN2003A bipolar transistor array and the CSD1751Q2 NexFET™. This BoosterPack™ contains everything needed to drive up to 2 stepper motors or 8 channels, with up to 30V and supports both serial and parallel (...)
TIDA-01471 — PLC 아날로그 입력용 IEPE 진동 센서 인터페이스 레퍼런스 디자인
TIDA-01329 — HVAC 루버 및 모터 제어를 위한 구성 가능 스테퍼 드라이버 레퍼런스 디자인
TIDA-00170 — 프로그래머블 로직 컨트롤러(PLC)용 16비트 아날로그 혼합 입력 및 출력 모듈 레퍼런스 디자인
패키지 | 핀 | 다운로드 |
---|---|---|
PDIP (N) | 16 | 옵션 보기 |
SOIC (D) | 16 | 옵션 보기 |
SOIC (DW) | 16 | 옵션 보기 |
SOP (NS) | 16 | 옵션 보기 |
SSOP (DB) | 16 | 옵션 보기 |
TSSOP (PW) | 16 | 옵션 보기 |
— (—) | — |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치