TCA9846
- 1-to-4 Bidirectional translating switches with ultra low voltage translation down to 0.65V
- I2C Bus and SMBus compatible
- Active-low reset input
- 2 address pins, allowing up to 16 TCA9846 devices on the I2C bus
- Channel selection through an I2C Bus, in any combination
- Power up with all switch channels deselected
- Low RON switches
- Allows voltage-level translation between 0.65V, 0.8, 1.2V, 1.8V, 2.5V, and 3.3V
- No glitch on power up
- Supports hot insertion
- Low standby current
- Operating power-supply voltage range of 1.65V to 3.6V
- 3.6V Tolerant inputs
- 0 to 1MHz Clock frequency
- Latch-up performance exceeds 100mA Per JESD 78, class II
- ESD Protection exceeds JESD 22
- ±2000V Human-body model (A114-A)
- ±500V Charged-device model (C101)
The TCA9846 is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual SCn/SDn channel or combination of channels can be selected, determined by the contents of the programmable control register.
An active-low reset ( RESET) input allows the TCA9846 to recover from a situation in which one of the downstream I2C buses is stuck in a low state. Pulling RESET low resets the I2C state machine and causes all the channels to be deselected, as does the internal power-on reset function.
The pass gates of the switches are constructed so that VDD1/VDD2 pins can be used to limit the maximum high voltage, which is passed by the TCA9846. Limiting the maximum high voltage allows the use of different bus voltages on each pair, so that 0.65V, 0.8V, 1.2V, or 1.8V parts can communicate with 3.3V parts, without any additional protection. External pullup resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 3.6V tolerant.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | TCA9846 Ultra Low-Voltage 4-Channel 1Mhz Capable I2 C Switch datasheet | PDF | HTML | 2026/03/03 |
| Application note | Multiplexer/Switch Solutions for Fast Mode Plus I2C Applications | PDF | HTML | 2026/01/14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TCA984649-EVM — TCA984649 평가 모듈
TCA984649-EVM은 TCA9846 및 TCA9849의 성능을 평가하는 데 사용됩니다. 이 EVM(평가 모듈)에는 솔더링된 장치를 함께 제공하지 않습니다. 제품 페이지 맨 아래에서 샘플을 온라인 주문할 수 있습니다. 이 EVM을 사용하면 엔지니어가 TCA9846 및 TCA9849 I2C 신호 처리 기능을 평가할 수 있습니다. EVM에 USB2ANY 수 커넥터가 있어 DUT를 통해 I2C 신호를 보냅니다. USB2ANY 마이크로컨트롤러는 별도로 구매해야 하며 이 EVM에 포함되어 제공되지 않습니다. 통신에 USB2ANY를 (...)
TMUX-24PW-EVM — 16, 20, 24핀 PW 얇은 수축 소형 아웃라인 패키지(TSSOP)용 TMUX 일반 평가 모듈
TMUX-24PW-EVM 평가 모듈(EVM)을 사용하면 16, 20 또는 24핀 TSSOP 패키지(PW)를 사용하고 고전압 작동에 맞게 정격 조정된 TI의 TMUX 제품 라인의 빠른 프로토타이핑 및 DC 특성화가 가능합니다.
TMUXBQB-DYYEVM — 16핀 BQB, DYY 및 PW 패키지용 일반 TMUX 평가 모듈
TMUXBQB-DYYEVM을 이용하면 16pin TSSOP(PW), WQFN(BQB) 및 SOT-23 THIN(DYY) 패키지를 사용하는 당사의 TMUX 제품 라인의 신속한 프로토타이핑 및 DC 특성화가 가능합니다.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.