TMUX582F-SEP
- Radiation hardened
- Single event latch-up (SEL) immune to 43 MeV-cm2/mg at 125°C
- ELDRS free to 30 krad(Si)
- Total ionizing dose (TID) RLAT for every wafer lot up to 20 krad(Si)
- TID characterized up to 50 krad(Si)
- Space enhanced plastic
- Supply range: 8 V to 22 V or ±5 V to ±16.5 V
- Integrated powered-off and overvoltage protection:
- Overvoltage tolerance up to 85 V from source to supplies or to drain
- Overvoltage and power-off protected up to ±60 V
- Cold sparing capable up to ±60 V
- Adjustable fault threshold thresholds (Vfp and Vfn) from 5 V to supplies
- Interrupt flag feedback indicating faulted channel
- Non-fault channels continue to operate with low leakage currents
- Latch-up immune construction
- Precision performance with 100 pA typical leakage current, 3.5 pF capacitance, and 1% Ron flatness
- Operating temperature from –55°C to +125°C
- Controlled baseline
- Gold wire
- NiPdAu lead finish
- Extended product life cycle
- Extended product-change notification
- Product traceability
- Enhanced mold compound for low outgassing
- Small, industry standard TSSOP-20 packaging
The TMUX582F-SEP is a modern 8:1 multiplexer suitable for both single ended and differential operation. This latch-up immune device offers robust overvoltage protection up to ±60 V making it optimal for harsh space environments. Additionally, this protection operates in powered-on, powered-off, and floating supply conditions.
During a fault such as an overvoltage or undervoltage event, the offending channel turns OFF and the Sx pin becomes high impedance. If this fault channel is selected, the drain (D) is pulled to the fault rail that is exceeded (Vfp or Vfn). All other Sx pins which are not under fault continue to operate normally. During normal operation, when the source (Sx) does not exceed Vfp or Vfn, the switch operates with low leakage, low capacitance and an ultra-flat on-resistance. This provides high performance signal integrity with minimal distortion.
The TMUX582F-SEP is a fault protected CMOS multiplexer flexible enough to handle almost any application, from system monitoring, to power-up sequencing protection, to high precision front end data acquisition.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TMUX582F-SEP ±60-V Protected, Latch-up Immune 8:1 Multiplexer with Adjustable Fault Thresholds in Space Enhanced Plastic datasheet | PDF | HTML | 2023/06/28 |
| * | Radiation & reliability report | TMUX582F-SEP Production Flow and Reliability Report | 2024/01/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TMUX-24PW-EVM — 16, 20, 24핀 PW 얇은 수축 소형 아웃라인 패키지(TSSOP)용 TMUX 일반 평가 모듈
TMUX-24PW-EVM 평가 모듈을 사용하면 16, 20 또는 24핀 TSSOP 패키지(PW)를 사용하고 고전압 작동에 맞게 정격 조정된 TI의 TMUX 제품 라인의 빠른 프로토타이핑 및 DC 특성화가 가능합니다.
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| TSSOP (PW) | 20 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.