TPS62177
- DCS-Control™ Topology
- Input Voltage Range 4.75 V to 28 V
- Quiescent Current Typically 4.8 µA (Sleep Mode)
- 100% Duty Cycle Mode
- Active Output Discharge
- Power Good Output
- Output Current of 500 mA
- Output Voltage Range 1 VDC to 6 V
- Switching Frequency of Typically 1 MHz
- Seamless Power Save Mode Transition
- Undervoltage Lockout
- Short Circuit Protection
- Over Temperature Protection
- Available in 2-mm × 3-mm 10-pin WSON Package
The TPS6217x is a high efficiency synchronous step-down DC/DC converter, based on the DCS-Control™ topology.
With a wide operating input voltage range of 4.75 V to 28 V, the device is ideally suited for systems powered from multi cell Li-Ion as well as 12 V and even higher intermediate supply rails, providing up to 500-mA output current.
The TPS6217x automatically enters power save mode at light loads, to maintain high efficiency across the whole load range. As well, it features a sleep mode to supply applications with advanced power save modes like ultra low power micro controllers. The power good output may be used for power sequencing and/or power on reset.
The device features a typical quiescent current of 22 µA in normal mode and 4.8 µA in sleep mode. In sleep mode, the efficiency at very low load currents can be increased by as much as 20%. In shutdown mode, the shutdown current is less than 2 µA and the output is actively discharged.
The TPS6217x, available in an adjustable and a fixed output voltage version, is packaged in a small 2-mm × 3-mm 10-pin WSON package.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-AFE031-DF1 — SunSpec 호환 PLC BoosterPack™
TPS62175EVM-098 — TPS62175EVM-098 스누즈/절전/대기 모드를 지원하는 스텝다운 컨버터 평가 모듈 보드
Step Down Converter With Snooze/Sleep/Standby Mode Evaluation Module Board
This EVM is designed to help the user easily evaluate and test the operation and functionality of the TPS62175. The EVM converts a 4.7-V to 28-V input voltage to a regulated 3.3-V output voltage that delivers 500 mA.TIDA-00203 — 32비트 ARM Cortex-M4F MCU를 사용하는 초소형 CAN-이더넷 컨버터 레퍼런스 디자인
This reference design demonstrates a small form-factor Controller Access Network (CAN)-to-Ethernet converter using the TM4C129XNCZAD 32-bit ARM® Cortex™-M4F MCU. Supporting 10/100 Base-T compliant with IEEE 802.3 standard, this reference design is useful for industrial drives (...)
TIDA-00226 — 32비트 ARM® Cortex™-M4F MCU 기반 소형 폼 팩터 시리얼 투 이더넷 컨버터
Serial communications have been widely used in grid infrastructure equipments. But the limitation of transmission distance and bandwidth of serial communication leads to demand for a more flexible and high-speed method to meet modern smart grid network migration. Ethernet has been accepted as an (...)
TIDA-010047 — Si MOSFET를 지원하는 22W/in3, 93.1% 피크 효율, 100W USB-PD 3.0 AC/DC 어댑터 레퍼런스 설계
TIDA-050012 — 전원 DUO 소스 200W USB-C PD 레퍼런스 설계
TIDA-060001 — SunSpec 급속 셧다운 전송 및 수신 레퍼런스 설계
TIDM-CONNECTED-ETHERNET — 연결된 이더넷, USB 및 LCD 레퍼런스 디자인
This reference design will demonstrate several Ethernet- and LCD-enabled applications such as remote sensor monitoring, Ethernet configuration via web-based and LCD dashboards and aware applications that interface with weather websites.
TIDM-TM4C129CAMERA — ARM® Cortex®-M 마이크로컨트롤러(MCU)용 카메라 레퍼런스 설계
이 설계는 QVGA 디스플레이 패널과 원격 모니터링용 임베디드 웹 서버를 사용하여 네트워크 카메라를 구현합니다. 웹 서버용 250KB의 메모리 풋프린트가 있으므로 TM4C129x 마이크로컨트롤러에서 추가적인 사용자 지정을 위해 충분한 메모리를 사용할 수 있습니다.
TIDM-TM4C129XSDRAM — 고성능 마이크로컨트롤러의 SDRAM 메모리 인터페이싱
This reference design demonstrates how to implement and interface SDRAM Memory to the performance microcontroller TM4C129XNCZAD. The implementation is made possible by using the EPI Interface of the Microcontroller to interface a 256Mbit SDRAM at 60MHz which allows developers to implement (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DQC) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.