전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS62840

활성

60nA 정동작 전류(IQ), 1.8V~6.5VIN, 고효율 750mA 스텝다운 컨버터

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 0.75 Vin (max) (V) 6.5 Vin (min) (V) 1.8 Vout (max) (V) 1.55, 3.3, 3.4, 3.6 Vout (min) (V) 0.8, 1.8, 3.4 Features Enable, Fixed Output, Forced PWM, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode DCS-Control Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 1800 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 0.06 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 0.75 Vin (max) (V) 6.5 Vin (min) (V) 1.8 Vout (max) (V) 1.55, 3.3, 3.4, 3.6 Vout (min) (V) 0.8, 1.8, 3.4 Features Enable, Fixed Output, Forced PWM, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode DCS-Control Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 1800 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 0.06 Duty cycle (max) (%) 100 Type Converter
DSBGA (YBG) 6 1.4136 mm² 0.95 x 1.488 HVSSOP (DGR) 8 9 mm² 3 x 3 VSON-HR (DLC) 8 3 mm² 2 x 1.5
  • 60-nA operating quiescent current
  • 100% duty-cycle mode with 120-nA IQ
  • Input voltage range VIN from 1.8 V to 6.5 V
  • Output current up to 750 mA
  • RF friendly DCS-Control™
  • 80% efficiency at 1 µA IOUT (3.6 VIN to 1.8 VOUT)
  • 16 selectable output voltages via VSET pin
  • Auto transition PFM/PWM or forced-PWM mode
  • Selectable forced PWM and STOP modes
  • Output discharge function
  • 25-nA shutdown current
  • SON-8, WCSP-6 and thermally enhanced HVSSOP-8 packages
  • 60-nA operating quiescent current
  • 100% duty-cycle mode with 120-nA IQ
  • Input voltage range VIN from 1.8 V to 6.5 V
  • Output current up to 750 mA
  • RF friendly DCS-Control™
  • 80% efficiency at 1 µA IOUT (3.6 VIN to 1.8 VOUT)
  • 16 selectable output voltages via VSET pin
  • Auto transition PFM/PWM or forced-PWM mode
  • Selectable forced PWM and STOP modes
  • Output discharge function
  • 25-nA shutdown current
  • SON-8, WCSP-6 and thermally enhanced HVSSOP-8 packages

The TPS62840 is a high-efficiency step-down converter with ultra-low operating quiescent current of typically 60 nA. The device contains special circuitry to achieve just 120 nA IQ in 100% mode to further extend battery life near the end of discharge.

The device uses DCS-Control to cleanly power radios and operates with a typical switching frequency of 1.8 MHz. In Power-Save Mode, the device extends the light load efficiency down to a load current range of 1 µA and below.

16 predefined output voltages can be selected by connecting a resistor to pin VSET, making the device flexible for various applications with a minimum amount of external components.

The STOP pin of the device immediately eliminates any switching noise in order to take a noise-free measurement in test and measurement systems.

The TPS62840 provides an output current of up to 750 mA. With an input voltage of 1.8 V to 6.5 V, the device supports multiple power sources such as 2S to 4S Alkaline, 1S to 2S Li-MnO2, or 1S Li-Ion/Li-SOCl2.

The TPS62840 is a high-efficiency step-down converter with ultra-low operating quiescent current of typically 60 nA. The device contains special circuitry to achieve just 120 nA IQ in 100% mode to further extend battery life near the end of discharge.

The device uses DCS-Control to cleanly power radios and operates with a typical switching frequency of 1.8 MHz. In Power-Save Mode, the device extends the light load efficiency down to a load current range of 1 µA and below.

16 predefined output voltages can be selected by connecting a resistor to pin VSET, making the device flexible for various applications with a minimum amount of external components.

The STOP pin of the device immediately eliminates any switching noise in order to take a noise-free measurement in test and measurement systems.

The TPS62840 provides an output current of up to 750 mA. With an input voltage of 1.8 V to 6.5 V, the device supports multiple power sources such as 2S to 4S Alkaline, 1S to 2S Li-MnO2, or 1S Li-Ion/Li-SOCl2.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS62843 활성 1.8V~5.5V 입력, 600mA 초저 IQ 스텝다운 컨버터 Low IQ 275-nA DC/DC converter with compact solution size of 5.7 mm2

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
27개 모두 보기
유형 직함 날짜
* Data sheet TPS62840 1.8-V to 6.5-V, 750-mA, 60-nA IQ Step-Down Converter datasheet (Rev. D) PDF | HTML 2020/04/27
Application note Using the TPS6284x in an Inverting Buck-Boost Topology PDF | HTML 2025/01/09
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/06
White paper 저전력 애플리케이션의 저 IQ 문제점 극복 (Rev. B) PDF | HTML 2023/04/19
Application note Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 2022/05/23
Technical article 3 quiescent-current (Iq) specifications you need to understand PDF | HTML 2021/11/12
Application note High-Performance CMOS Image Sensor Power Supply in Industrial Camera and Vision (Rev. A) 2021/07/30
Application note Extend Battery Life with <100 nA IQ Buck Converter Achieving <150 µV Voltage Rip (Rev. A) PDF | HTML 2021/05/07
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Technical article Advantages of the STOP function for low-noise data-acquisition applications PDF | HTML 2020/03/31
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019/10/14
Technical article Deciphering low Iq: Using WEBENCH® to design near 100% duty-cycle for ultra-low po PDF | HTML 2019/07/15
Technical article Do all rails need low Iq? PDF | HTML 2019/07/15
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018/12/11
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018/06/22
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
Technical article Never lose your luggage again with a smart tracker design PDF | HTML 2017/10/20
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 2016/10/24
Analog Design Journal Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015/08/17
Analog Design Journal Five steps to a great PCB layout for a step-down converter 2015/01/29
Analog Design Journal Accurately measuring efficiency of ultralow-IQ devices 2014/01/22
Analog Design Journal High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013/07/25
Application note How to Measure the Control Loop of DCS-Control Devices (Rev. A) 2012/08/09
Application note Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/01/13
Application note Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011/09/19
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011/06/17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62840-1DLCEVM55 — 60-nA IQ, QFN 패키지, 고효율 750mA 스텝다운 컨버터 평가 모듈(2회로)

TPS62840-1DLCEVM55 평가 모듈(EVM)은 소형 1.5mm x 2.0mm QFN 패키지에 60nA IQ를 지원하는 750mA 스텝다운 컨버터의 TPS6284XDLC 제품군을 평가할 수 있습니다. 이 EVM에는 1.8V~6.5V의 더 높은 입력 전압에서 0.8V~3.3V의 출력 전압을 생성하는 별도의 회로 2개가 포함되어 있습니다. 매우 낮은 IQ 덕분에 TPS6284XDLC는 웨어러블, 건물 자동화 및 IoT(사물 인터넷)와 같이 전류 소비가 매우 낮은 시스템에 긴 배터리 수명을 제공합니다.

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

TPS62840-1YBGEVM56 — 60-nA IQ, WCSP 패키지, 고효율 750mA 스텝다운 컨버터 평가 모듈(2회로)

TPS62840-1YBGEVM056 평가 모듈(EVM)은 0.4mm 피치의 소형 1.5mm x 1mm WCSP 패키지에 60nA IQ를 지원하는 750mA 스텝다운 컨버터의 TPS6284XYBG 제품군을 평가할 수 있습니다. 이 EVM에는 1.8V~6.5V의 더 높은 입력 전압에서 최대 1mm의 솔루션 높이로 0.8V~3.3V의 출력 전압을 생성하는 별도의 회로 2개가 포함되어 있습니다. 매우 낮은 IQ 덕분에 TPS6284XYBG는 웨어러블, 건물 자동화 및 IoT(사물 인터넷)와 같이 전류 소비가 매우 낮은 시스템에 긴 배터리 (...)

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

TPS62841-2EVM123 — TPS62841 및 TPS62842 60nA IQ, DGR 패키지, 750mA 벅 컨버터 평가 모듈(2회로)

TPS62841-2EVM123 평가 모듈(EVM)을 사용하면 높은 열 성능 HVSSOP 패키지의 60nA IQ를 갖춘 TPS6284XDGR 750mA 스텝다운 컨버터를 쉽게 평가할 수 있습니다. EVM에는 1.8V~6.5V의 더 높은 입력 전압에서 0.8V~3.6V의 출력 전압을 생성하는 별도의 회로 2개가 포함되어 있습니다. 매우 낮은 IQ 덕분에 TPS6284XDGR은 건물 자동화, 계량 및 IoT(사물 인터넷)와 같이 전류 소비가 매우 낮은 시스템에 긴 배터리 수명을 제공합니다.

사용 설명서: PDF | HTML
TI.com에서 구매 불가
평가 보드

TPS62842EVM-103 — 60nA IQ, DGR 패키지, 고효율 750mA 스텝다운 컨버터 평가 모듈(EVM)

TPS62842EVM-103 평가 모듈(EVM)을 사용하면 높은 열 성능 HVSSOP 패키지의 60nA IQ를 갖춘 TPS62842DGR 750mA 스텝다운 컨버터를 쉽게 평가할 수 있습니다. EVM에는 1.8V~6.5V의 더 높은 입력 전압에서 1.8V~3.6V의 출력 전압을 변환하는 회로 1개가 포함되어 있습니다. 매우 낮은 IQ 덕분에 TPS62842DGR은 건물 자동화, 계량 및 IoT(사물 인터넷)와 같이 전류 소비가 매우 낮은 시스템에 긴 배터리 수명을 제공합니다.

사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

TPS62840 PSpice Unencrypted Transient Model (Rev. C)

SLUM691C.ZIP (83 KB) - PSpice Model
시뮬레이션 모델

TPS62841 PSPICE Model

SLVMD75.ZIP (98 KB) - PSpice Model
시뮬레이션 모델

TPS62842 PSpice Transient Model

SLVMD74.ZIP (92 KB) - PSpice Model
거버(Gerber) 파일

BSR055 Gerbers

SLVC773.ZIP (452 KB)
거버(Gerber) 파일

BSR056 Gerbers

SLVC774.ZIP (445 KB)
레퍼런스 디자인

TIDA-010300 — Low-power CGM sensor reference design with 20mm footprint

This continuous glucose monitor (CGM) reference design provides a comprehensive evaluation platform for TI's latest resources in low-power and continuous monitoring of glucose for diabetes care. The reference design utilizes an analog front-end (AFE) for low- power and accurate electrochemical (...)
Design guide: PDF
레퍼런스 디자인

TIDA-010224 — 배터리 수명 연장을 위한 저전력 무선 카메라 레퍼런스 디자인

이 레퍼런스 설계는 업계 최고의 이미지 처리, 커넥티비티, 센서 및 전력을 결합하여 배터리 작동 무선 카메라용 솔루션을 제공합니다. 고효율 전력 컨버터와 최적화된 시스템 아키텍처는 배터리 수명을 늘려줍니다. 이미지
Wi-Fi® 연결 장치가 포함된 프로세서를 사용하면 잡음 감소 및 에코 취소 기능이 구현된 안전한 고품질 라이브 비디오 스트리밍 및 양방향 오디오 스트리밍이 가능합니다. 이 설계에는 나이트 비전 기능을 지원하는 적외선(IR) LED 및 IR 차단 필터가 포함되어 있습니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010072 — 호흡기 애플리케이션을 위한 송풍기 및 밸브 제어 레퍼런스 설계

이 레퍼런스 설계는 많은 호흡기 애플리케이션의 핵심 요구 사항인 최대 ±200kRPM/s의 모터 가속 및 감속을 지원할 수 있는 소형 시스템 설계를 제공합니다. 이 설계는 TMS320F28027F를 비롯한 다양한 오프보드 C2000 컨트롤러를 지원하여 저비용 무센서 FOC(자속 기준 제어)를 가능하게 합니다. 또한 이 설계는 조정된 라인과 배터리 전력을 모두 지원할 수 있는 넓은 입력 전압 범위(6~28V)를 지원합니다. 송풍기 및 밸브를 구동하기 위해 이 설계는 DRV8323RS 스마트 게이트 드라이버와 DRV8847 모터 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010053 — 주 전지 레퍼런스 디자인을 사용하는 스마트 계량기 무선 모듈을 위한 저전력 옵션

이 레퍼런스 디자인은 리튬 망간 이산화규소(LiMnO2) 기본 배터리 및 사물 인터넷(IoT) 관련 애플리케이션을 위한 상업용 기성품 협대역 모듈을 사용한 스마트 유량계를 위한 세 가지 전원 아키텍처를 보여줍니다. 세 가지 전원 솔루션은 배터리로 구동되는 스마트 유량 계량기의 배터리 및 시스템 상태 모니터링 레퍼런스 디자인하드웨어와 결합되어 배터리 수명으로 고정밀 SOH(성능 상태) 계산을 제공합니다. 상시 가동 시스템 내 전류 모니터링은 RF 전송의 전류 피크를 감지하고 SOH 측정은 조정 가능한 지연을 통해 예약됩니다.  (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YBG) 6 Ultra Librarian
HVSSOP (DGR) 8 Ultra Librarian
VSON-HR (DLC) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상