TPS745
- Input Voltage Range: 1.5 V to 6.0 V
- Adjustable Output Voltage:
- 0.55 V to 5.5 V
- Very Low Dropout:
- 130 mV (max) at 500 mA (3.3 VOUT)
- High Output Accuracy: 0.7% (Typical) and 1% (Maximum Over Temperature)
- Open-Drain Power-Good Output
- IQ: 25 µA (Typical)
- Built-In Soft-Start With Monotonic VOUT Rise
- Package:
- 2-mm × 2-mm WSON-6 (DRV)
- Active Output Discharge
The TPS745 is an adjustable 500-mA low-dropout (LDO) regulator with power-good functionality. This device is available in a small, 6-pin, 2-mm × 2-mm WSON package and consumes very low quiescent current and provides fast line and load transient performance. The TPS745 features an ultra-low dropout of 130 mV at 500 mA that can help improve the power efficiency of the system.
The TPS745 is optimized for a wide variety of applications by supporting an input voltage range from 1.5 V to 6.0 V and an externally adjustable output range of 0.55 V to 5.5 V. The low output voltage enables this LDO to power the modern microcontrollers with lower core voltages.
The TPS745 has a power-good (PG) output that monitors the voltage at the feedback pin to indicate the status of the output voltage. The EN input and PG output can be used for the sequencing multiple power sources in the system.
The TPS745 is stable with small ceramic output capacitors, allowing for a small overall solution size. A precision band-gap and error amplifier provides high accuracy of 0.7% (max) at 25°C and 1% (max) over temperature (85ºC). This device includes integrated thermal shutdown, current limit, and undervoltage lockout (UVLO) features. The TPS745 has an internal foldback current limit that helps reduce the thermal dissipation during short-circuit events.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS745 500-mA, High Accuracy, Adjustable LDO With Power-Good in a Small Size Package datasheet (Rev. A) | PDF | HTML | 2018/12/14 |
| Application note | An empirical analysis of the impact of board layout on LDO thermal performance (Rev. A) | PDF | HTML | 2025/09/23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS746EVM-009 — 전력 양호를 지원하는 TPS746 조정 가능 1A LDO 선형 레귤레이터 평가 모듈
TPS746EVM-009 평가 모듈(EVM)은 1A, 낮은 Vin, 전원 양호 기능 지원 저손실(LDO) 전압 레귤레이터인 TPS746의 작동 및 성능을 평가하기 위한 일반적인 구성으로 설계되었습니다.
EVM 회로 보드는 최대 1A의 동적 부하까지 전류가 필요한 엔지니어링 애플리케이션을 위한 레퍼런스 설계로 구성되어 있습니다.
WINSE-3P-ZRT512C-R454B-TI — WINSE R454B 냉매 센서 모듈
ZRT512C-R454B-4-냉매 센서 모듈은 TI MCU와 아날로그 장치를 통합한 스마트 적외선 타입으로, 비분산 적외선(NDIR) 원리를 활용해 냉매의 존재 여부를 감지하며, 우수한 선택성과 산소 비의존성을 제공합니다. 이 모듈은 완성도 높은 적외선 가스 감지 기술에 미세 가공 기술과 정교한 회로 설계를 결합하여 제작된 고성능의 컴팩트한 센서 모듈입니다. 사용이 간편하며 뛰어난 성능을 제공합니다.
D3-3P-DESIGNCORE-CAMERA — D3 EmbeddedDesignCore® 카메라 시리즈 카메라 모듈
D3 Embedded의 DesignCore® 카메라 모듈은 TDA4를 비롯한 여러 TI ADAS 프로세서와 호환됩니다.
견고한 PRO 버전은 IP67 방진 및 방수 표준을 충족하며 AEC-Q100 등급 2(-40°C~+105°C 온도 범위)에 대한 차량용 등급 이미지 센서를 갖추고 있습니다.
VANTRON-3P-AM6411 — Vantron Technology G405 2ETH 2COM 에지 컴퓨팅 게이트웨이
G405 industrial edge computing gateway is an Arm®-based high-performance solution built for industrial applications. The gateway features dual-SIM 4G connectivity, Wi-Fi, Bluetooth, and five Ethernet jacks, while supporting a virtual private network (VPN) to address diversified networking (...)
TIDA-010231 — 광발전 애플리케이션 아크 감지용 아날로그 프런트 엔드 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DRV) | 6 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.