TUSB320
- USB Type-C™ specification 1.1
- Backward compatible with USB Type-C specification 1.0
- Supports up to 3 A of current advertisement and detection
- Mode configuration
- Host only – DFP (source)
- Device only – UFP (sink)
- Dual role port – DRP
- Channel configuration (CC)
- Attach of USB port detection
- Cable orientation detection
- Role detection
- Type-C current mode (default, medium, high)
- VBUS detection
- I2C or GPIO control
- Role configuration control through I2C
- Supply voltage: 2.7 V to 5 V
- Low current consumption
- Industrial temperature range of –40 to 85°C
The TUSB320 device enables USB Type-C ports with the configuration channel (CC) logic needed for Type-C ecosystems. The TUSB320 device uses the CC pins to determine port attach and detach, cable orientation, role detection, and port control for Type-C current mode. The TUSB320 device can be configured as a downstream facing port (DFP), upstream facing port (UFP) or a dual role port (DRP) making it ideal for any application.
The TUSB320 device alternates configuration as a DFP or UFP according to the Type-C specifications. The CC logic block monitors the CC1 and CC2 pins for pullup or pulldown resistances to determine when a USB port has been attached, the orientation of the cable, and the role detected. The CC logic detects the Type-C current mode as default, medium, or high depending on the role detected. VBUS detection is implemented to determine a successful attach in UFP and DRP modes.
The device operates over a wide supply range and has low-power consumption. The TUSB320 device is available in industrial and commercial temperature ranges.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-AM263 — AM263x Arm® 기반 MCU 범용 LaunchPad™ 개발 키트
LP-AM263은 AM263x 시리즈의 Arm® 기반 애플리케이션 MCU를 위한 비용 최적화된 개발 보드입니다. 이 보드는 다음 애플리케이션을 개발할 수 있는 표준화되고 사용하기 쉬운 플랫폼을 제공하므로 초기 평가 및 프로토타이핑에 이상적입니다.
LP-AM263에는 AM2634 Arm® 기반 애플리케이션 MCU와 추가 부품이 포함되어 있어, 사용자가 IE(산업용 이더넷), 표준 이더넷, FSI(고속 직렬 인터페이스) 등을 포함한 다양한 장치 인터페이스를 사용하여 프로토타입을 쉽게 제작할 수 있습니다. AM2634는 (...)
TMDSCNCD263P — AM263Px 범용 controlCARD™ 개발 키트 Arm® 기반 MCU
TMDSCNCD263P는 AM263x 시리즈 TI Sitara™ 고성능 마이크로컨트롤러용 HSEC180 controlCARD 기반 평가 및 개발 툴입니다. 이 보드는 다음 애플리케이션을 개발할 수 있는 표준화되고 사용하기 쉬운 플랫폼을 제공하므로 초기 평가 및 프로토타이핑에 이상적입니다. AM263P 제어 카드에는 PMIC 기반 전력 솔루션 및 추가 구성품과 함께 Sitara AM263P4 프로세서가 탑재되어 있어 사용자가 산업용 이더넷, 표준 이더넷, FSI(고속 직렬 인터페이스) 등을 포함한 다양한 디바이스 인터페이스를 (...)
TMDSCNCD263P-SIP — AM263Px-SIP 제어 카드 평가 모듈
AM263Px-SIP(Silicon-In-Package) 제어 카드 EVM(평가 모듈)은 온다이 플래시 패키지 MCU()가 탑재된 Texas Instruments Sitara™ AM263Px용 평가 및 개발 보드입니다. 이 EVM은 프로그래밍 및 디버깅을 위한 온보드 에뮬레이션과 간단한 사용자 인터페이스를 위한 버튼 및 LED를 제공하여 AM263Px-SIP MCU에서 개발을 쉽게 시작하는 방법을 제공합니다. 제어 카드를 사용하면 HSEC(고속 에지 커넥터) 베이스보드 도킹 스테이션을 사용하여 주요 신호에 대한 헤더 핀 액세스를 (...)
TUSB320EVM — TUSB320 EVM(평가 모듈)
The TUSB320EVM can be configured to operate in DFP, UFP, or DRP mode via DIP switch selection and/or I2C control. All of the control inputs are also selectable via DIP switch configuration. The TUSB320 devices can be used with legacy USB systems or Type-C systems for evaluation purposes.
TIDA-00818 — mPOS(모바일 전자 매장) 전원 레퍼런스 디자인
TIDA-00818은 시스템 크기와 비용을 절감하기 위해 1S1P 리튬 이온 배터리 아키텍처를 갖춘 mPOS(mobile point of sale) 레퍼런스 설계입니다. 통합 부하 스위치는 대기 전력 소비를 줄이고 배터리 수명을 최대화하여 단일 셀 아키텍처를 구현하는 데 사용됩니다. USB Type-C 충전 포트도 더 높은 전력 공급을 지원하고 충전 시간을 최소화하기 위해 포함되었습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| X2QFN (RWB) | 12 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.