PowerPump, PowerLAN are trademarks of Texas Instruments.
The bq76PL102 PowerLAN dual-cell battery monitor is part of a complete scalable battery management system for use with arrays of up to 12 Li-Ion rechargeable cells. The bq76PL102 connects to one or two cells in a series string, performs voltage and temperature monitoring of each individual cell, and reports these parameters over the PowerLAN communication network. Together with a bq78PL114 master-gateway battery controller, the bq76PL102 forms a complete battery monitoring and management system for higher cell-count applications.
Partitioning of the battery monitor function on a per cell basis permits connection and measurement close to the cell. This results in superior accuracy and management over competing solutions. This scheme also facilitates the PowerPump cell balancing system, a technique which actively balances capacities of Li-Ion batteries without the excessive heat or limitations of bleed-balancing techniques.
The bq76PL102 PowerPump cell balancing technology uses a charge-transfer methodology which does not bleed off excess energy as heat, but instead moves energy dynamically from cell to cell as needed. Balancing is performed during all battery operational modes – charge, discharge, and rest. Balancing is automatically coordinated between all cells on a PowerLAN system. PowerPump balancing technology results in longer run time and longer cell life.
The PowerLAN communications architecture has been engineered to provide robust communications in tough EMI/RFI environments while avoiding the excessive power draw, high parts count, and elevated cost of other solutions. PowerLAN permits easy scalability using series connections of bq76PL102 dual-cell battery monitors. High-cell-count battery systems of up to 12 series cells are easily constructed without complicated high-voltage cell measurement restrictions.
The bq76PL102 works with the bq78PL114 master-gateway battery controller.
不建議將本產品用於磷酸鐵鋰和類似的低電壓電池化學物質。
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | PowerLAN Dual-Cell Li-Ion Monitor with PowerPump Cell Balancing datasheet (Rev. A) | 2009年 10月 15日 | |
| Application note | PowerPump(TM) Balancing (Rev. B) | 2011年 10月 26日 | ||
| User guide | bq78PL116EVM Evaluation Module | 2011年 1月 19日 | ||
| Application note | Quick-Start Guide for BQ78PL114 with BQ76PL102 Family Gas Gauges | 2010年 4月 26日 | ||
| EVM User's guide | bq78PL114 8S EVM (Rev. A) | 2010年 1月 14日 | ||
| Application note | bq78PL114 System Design Guidelines | 2009年 12月 1日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
The bqWizard™ application software allows the user to evaluate the condition, or state, of the battery Pack and Cells in the system. This software gives detailed insight into the workings of evaluation modules and user custom battery packs. The software is used to configure and setup (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGT) | 16 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。