首頁 馬達驅動器 有刷 DC (BDC) 馬達驅動器
首頁
馬達驅動器
有刷 DC (BDC) 馬達驅動器

DRV8906-Q1

現行

Automotive, 40V, 6A 6 channel half-bridge motor driver with advanced diagnostics

立即訂購
產品規格表

DRV8906-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of full bridges 3 Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Peak output current (A) 6 RDS(ON) (HS + LS) (mΩ) 1500 Sleep current (µA) 0.35 Control mode Independent 1/2-Bridge, PWM Control interface SPI Features Open-Load Detection Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
Number of full bridges 3 Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Peak output current (A) 6 RDS(ON) (HS + LS) (mΩ) 1500 Sleep current (µA) 0.35 Control mode Independent 1/2-Bridge, PWM Control interface SPI Features Open-Load Detection Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4
  • AEC-Q100 qualified for automotive applications
  • 4, 6, 8, 10 and 12 half-bridge outputs
  • 4.5-V to 32-V operating voltage
    • 40-V absolute maximum voltage
  • 1-A RMS current for each output
    • 6-A maximum current for paralleled outputs
  • Low-power sleep mode (1.5-µA)
  • Supports 3.3-V and 5-V logic inputs
  • SPI for configuration and diagnostics
    • 5-MHz, 16-Bit SPI communication
    • Daisy chain functionality
  • PWM generators programmable over SPI
    • Individual half-bridge PWM operation
    • Configurable for high-side, low-side, and H-bridge load driving
    • Supports 8-bit duty cycle resolution
  • Integrated protection features with per channel detailed diagnostics over SPI
    • nFAULT pin output
    • VM undervoltage lockout (UVLO)
    • VM overvoltage protection (OVP)
    • Logic supply power on reset (POR)
    • Overcurrent protection (OCP)
    • Enhanced open load detection (OLD)
    • Thermal warning and shutdown (OTW/OTSD)
  • AEC-Q100 qualified for automotive applications
  • 4, 6, 8, 10 and 12 half-bridge outputs
  • 4.5-V to 32-V operating voltage
    • 40-V absolute maximum voltage
  • 1-A RMS current for each output
    • 6-A maximum current for paralleled outputs
  • Low-power sleep mode (1.5-µA)
  • Supports 3.3-V and 5-V logic inputs
  • SPI for configuration and diagnostics
    • 5-MHz, 16-Bit SPI communication
    • Daisy chain functionality
  • PWM generators programmable over SPI
    • Individual half-bridge PWM operation
    • Configurable for high-side, low-side, and H-bridge load driving
    • Supports 8-bit duty cycle resolution
  • Integrated protection features with per channel detailed diagnostics over SPI
    • nFAULT pin output
    • VM undervoltage lockout (UVLO)
    • VM overvoltage protection (OVP)
    • Logic supply power on reset (POR)
    • Overcurrent protection (OCP)
    • Enhanced open load detection (OLD)
    • Thermal warning and shutdown (OTW/OTSD)

The DRV89xx-Q1 is a pin-to-pin compatible family of integrated multi-channel half-bridge drivers with 4 to 12 half-bridges. The device family features low on-state resistance (RDS(ON)) for improved thermal performance during high-current operation.

These devices can drive brushed-DC (BDC) motors or stepper motors in independent, sequential, or parallel mode. The half-bridges are fully controllable to achieve a forward, reverse, coasting and braking operation of motor.

These devices feature standard 16-bit, 5-MHz serial peripheral interface (SPI) with daisy chain capability for complete configuration and detailed diagnostics. Depending on the device, four or eight programmable PWM generators are integrated to allow for current limiting during motor operation or LED dimming control.

The device includes numerous protection and diagnostic features including an nFAULT pin to alert the system when a fault occurs. The device features a low-current open load detection (OLD) mode to detect open-load conditions when the nominal load current is small and a passive OLD mode for offline OLD. The device is also fully-protected from short-circuit, undervoltage, and over-temperature conditions.

View our full portfolio of brushed motor drivers on ti.com.

The DRV89xx-Q1 is a pin-to-pin compatible family of integrated multi-channel half-bridge drivers with 4 to 12 half-bridges. The device family features low on-state resistance (RDS(ON)) for improved thermal performance during high-current operation.

These devices can drive brushed-DC (BDC) motors or stepper motors in independent, sequential, or parallel mode. The half-bridges are fully controllable to achieve a forward, reverse, coasting and braking operation of motor.

These devices feature standard 16-bit, 5-MHz serial peripheral interface (SPI) with daisy chain capability for complete configuration and detailed diagnostics. Depending on the device, four or eight programmable PWM generators are integrated to allow for current limiting during motor operation or LED dimming control.

The device includes numerous protection and diagnostic features including an nFAULT pin to alert the system when a fault occurs. The device features a low-current open load detection (OLD) mode to detect open-load conditions when the nominal load current is small and a passive OLD mode for offline OLD. The device is also fully-protected from short-circuit, undervoltage, and over-temperature conditions.

View our full portfolio of brushed motor drivers on ti.com.

filter 尋找其它 有刷 DC (BDC) 馬達驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
DRV8904-Q1 現行 Automotive, 40V, 6A 4 channel half-bridge motor driver with advanced diagnostics Pin-to-pin compatible with 4 half bridges
DRV8908-Q1 現行 Automotive, 40V, 6A 8 channel half-bridge motor driver with advanced diagnostics Pin-to-pin compatible with 8 half bridges
DRV8910-Q1 現行 Automotive, 40V, 6A 10 channel half-bridge motor driver with advanced diagnostics Pin-to-pin compatible with 10 half bridges

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10
類型 標題 日期
* Data sheet DRV89xx-Q1 Automotive Multi-Channel Half-Bridge Drivers with Advanced Diagnostics datasheet (Rev. C) PDF | HTML 2020年 2月 11日
Application brief Full-Featured Automotive Side Mirror PDF | HTML 2024年 3月 15日
Application brief Open Load Detection in Integrated Drivers (Rev. C) PDF | HTML 2022年 3月 31日
Functional safety information DRV8906-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA 2021年 10月 15日
Application note Daisy Chain Implementation for Serial Peripheral Interface (Rev. A) 2021年 4月 7日
Application brief Using the Half-Bridge DRV89xx-Q1 as High-Side or Low-Side Switch PDF | HTML 2020年 10月 26日
Technical article Driving HVAC system flaps with an integrated, multichannel motor driver PDF | HTML 2020年 2月 17日
Application note Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) 2019年 2月 19日
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
Application brief PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8908-Q1EVM — DRV8908-Q1 多全橋馬達驅動器評估模組

DRV8908-Q1 評估模組 (EVM) 是一款應用基板，可用於輕鬆評估 DRV8908-Q1 裝置。DRV8908-Q1 裝置為整合式 4.5 V 至 32 V 8 通道全橋，適用於汽車應用，如加熱、通風和空調 (HVAC) 風門 DC 馬達控制。

標準 16 位元序列週邊介面 (SPI) 提供了一種可配置各種裝置設定、並透過外部控制器讀取故障診斷資訊的簡單方法。如需有關此評估模組的詳細資訊，請參閱 DRV89xx-Q1EVM 使用指南。

使用指南: PDF
View Options
開發板

DRV8912-Q1EVM — DRV8912-Q1 多重全橋馬達驅動器評估模組

DRV8912-Q1 評估模組 (EVM) 是一款應用基板，可用於輕鬆評估 DRV8912-Q1 裝置。DRV8912-Q1 裝置為整合式 4.5 V 至 32 V 12 通道全橋，適用於汽車應用，如加熱、通風和空調 (HVAC) 風門 DC 馬達控制。

標準 16 位元序列週邊介面 (SPI) 提供了一種可配置各種裝置設定、並透過外部控制器讀取故障診斷資訊的簡單方法。如需有關此評估模組的詳細資訊，請參閱 DRV8912-Q1EVM 使用指南。

使用指南: PDF
View Options
參考設計

TIDA-020027 — 車用全功能側視鏡模組參考設計

現代豪華側視鏡包含許多便利功能，除了簡單地提供側視鏡的 X-Y 方向控制以外，還可為駕駛員提供更好更安全的體驗。其中包括可減少眩光的自動調光側視鏡；用於在狹小停車空間內防止側視鏡受損的可摺疊側視鏡模組；用於盲點物體偵測的 LED 指示燈、照地燈和轉向指示燈；以及用於在寒冷條件下為側視鏡除霧和除冰的加熱器。每一項功能的新增都需要更多電子裝置，因此汽車電子設計人員希望能夠設計出隨著負載需求的變化可擴展的多功能整合式解決方案。此參考設計為小尺寸解決方案中考量這類電子裝置的設計提供了出發點。
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片