首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

LM4947

現行

具 87-mW 耳機放大器和 3D 強化功能的 2.2 W 單聲道類比輸入 D 類放大器

立即訂購
產品規格表

LM4947

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 8 Output power (W) 1.19 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 4.5 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 79 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 8 Output power (W) 1.19 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 4.5 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 79 Operating temperature range (°C) -40 to 85
DSBGA (YZR) 25 7.5625 mm² 2.75 x 2.75
  • I2C Control Interface
  • I2C Programmable Texas Instruments 3D Audio
  • I2C Controlled 32 Step Digital Volume Control (-59.5dB to +18dB)
  • Three Independent Volume Channels (Left, Right, Mono)
  • Eight Distinct Output Modes
  • Small, 25–Bump DSBGA Packaging
  • “Click and Pop” Suppression Circuitry
  • Thermal Shutdown Protection
  • Low Shutdown Current (0.1μA, typ)
  • RF Suppression
  • Differential Mono and Stereo Inputs
  • Stereo Input Mux

Key Specifications

  • THD+N at 1kHz, 500mW into 8Ω BTL (3.3V): 1.0% (typ)
  • THD+N at 1kHz, 37mW into 32Ω SE (3.3V): 1.0% (typ)
  • Single Supply Operation (VDD): 2.7 to 5.5 V
  • I2C Single Supply Operation: 2.2 to 5.5 V

All trademarks are the property of their respective owners.

  • I2C Control Interface
  • I2C Programmable Texas Instruments 3D Audio
  • I2C Controlled 32 Step Digital Volume Control (-59.5dB to +18dB)
  • Three Independent Volume Channels (Left, Right, Mono)
  • Eight Distinct Output Modes
  • Small, 25–Bump DSBGA Packaging
  • “Click and Pop” Suppression Circuitry
  • Thermal Shutdown Protection
  • Low Shutdown Current (0.1μA, typ)
  • RF Suppression
  • Differential Mono and Stereo Inputs
  • Stereo Input Mux

Key Specifications

  • THD+N at 1kHz, 500mW into 8Ω BTL (3.3V): 1.0% (typ)
  • THD+N at 1kHz, 37mW into 32Ω SE (3.3V): 1.0% (typ)
  • Single Supply Operation (VDD): 2.7 to 5.5 V
  • I2C Single Supply Operation: 2.2 to 5.5 V

All trademarks are the property of their respective owners.

The LM4947 is an audio subsystem capable of efficiently delivering 500mW (Class D operation) of continuous average power into a mono 8Ω bridged-tied load (BTL) with 1% THD+N, 37mW (Class AB operation) power channel of continuous average power into stereo 32Ω single-ended (SE) loads with 1% THD+N, or an output capacitor-less (OCL) configuration with identical specification as the SE configuration, from a 3.3V power supply.

The LM4947 has six input channels: one pair for a two-channel stereo signal, the second pair for a secondary two-channel stereo input, and the third pair for a differential single-channel mono input. Additionally, the two sets of stereo inputs may be configured as a single stereo differential input (differential left and differential right). The LM4947 features a 32-step digital volume control and eight distinct output modes. The digital volume control, 3D enhancement, and output modes are programmed through a two-wire I2C compatible interface that allows flexibility in routing and mixing audio channels.

The RF suppression circuitry in the LM4947 makes it well-suited for GSM mobile phones and other portable applications in which strong RF signals generated by an antenna (and long output traces) may couple audibly into the amplifier.

The LM4947 is designed for cellular phones, PDAs, and other portable handheld applications. It delivers high quality output power from a surface-mount package and requires only eight external components in the OCL mode (two additional components in SE mode).

The LM4947 is an audio subsystem capable of efficiently delivering 500mW (Class D operation) of continuous average power into a mono 8Ω bridged-tied load (BTL) with 1% THD+N, 37mW (Class AB operation) power channel of continuous average power into stereo 32Ω single-ended (SE) loads with 1% THD+N, or an output capacitor-less (OCL) configuration with identical specification as the SE configuration, from a 3.3V power supply.

The LM4947 has six input channels: one pair for a two-channel stereo signal, the second pair for a secondary two-channel stereo input, and the third pair for a differential single-channel mono input. Additionally, the two sets of stereo inputs may be configured as a single stereo differential input (differential left and differential right). The LM4947 features a 32-step digital volume control and eight distinct output modes. The digital volume control, 3D enhancement, and output modes are programmed through a two-wire I2C compatible interface that allows flexibility in routing and mixing audio channels.

The RF suppression circuitry in the LM4947 makes it well-suited for GSM mobile phones and other portable applications in which strong RF signals generated by an antenna (and long output traces) may couple audibly into the amplifier.

The LM4947 is designed for cellular phones, PDAs, and other portable handheld applications. It delivers high quality output power from a surface-mount package and requires only eight external components in the OCL mode (two additional components in SE mode).
open-in-new 尋找其它 喇叭放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet LM4947 Mono Class D & Stereo Audio Sub-Sys w/OCL Hp Amp & TI 3D datasheet (Rev. D) 2013年 5月 1日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發模組 (EVM) 的 GUI

SNAC026 — LM4947 Control Software

支援產品和硬體

支援產品和硬體

產品
喇叭放大器
LM4947 — 具 87-mW 耳機放大器和 3D 強化功能的 2.2 W 單聲道類比輸入 D 類放大器
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 引腳 下載
DSBGA (YZR) 25 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片