MSPM0G1105
- Core
- Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 80MHz
- Operating characteristics
- Extended temperature: –40°C up to 105°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 128KB of flash memory with built-in error correction code (ECC)
- Up to 32KB of SRAM with hardware parity
- High-performance analog peripherals
- Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADCs) with up to 17 external channels
- 14-bit effective resolution at 250ksps with hardware averaging
- One general-purpose amplifier (GPAMP)
- Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
- Integrated temperature sensor
- Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADCs) with up to 17 external channels
- Optimized low-power modes
- RUN: 101µA/MHz (CoreMark)
- SLEEP: 40µA/MHz
- STOP: 190µA at 4MHz
- STANDBY: 1.5µA with 32KHz LFXT, RTC with SRAM, CPU state, and registers retained
- SHUTDOWN: 80nA with IO retained and IO wake-up capability
- Intelligent digital peripherals
- 7-channel DMA controller
- Two 16-bit advanced control timers support dead band insertion and fault handling
- Seven timers supporting up to 22 PWM channels
- One 16-bit general purpose timer supports QEI
- Two 16-bit general-purpose timers support low-power operation in STANDBY mode
- One 32-bit general-purpose timer
- Two 16-bit advanced timers with deadband and complementary outputs up to 12 PWM channels
- Two window-watchdog timers (WWDT)
- RTC with alarm and calendar mode
- Enhanced communication interfaces
- Four UART interfaces
- One supports LIN, IrDA, DALI, Smart Card, Manchester
- Three support low-power operation in STANDBY mode
- Two I2C interfaces supporting FM+ (1Mbit/s), SMBus, PMBus, and wakeup from STOP mode
- Two SPIs, one SPI supports up to 32Mbits/s
- Four UART interfaces
- Clock system
- Internal 4MHz to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
- Phase-locked loop (PLL) up to 80MHz
- Internal 32kHz oscillator (LFOSC) with ±3% accuracy
- External 4MHz to 48MHz crystal oscillator (HFXT)
- External 32kHz crystal oscillator(LFXT)
- External clock input
- Data integrity and encryption
- Cyclic redundancy checker (CRC-16, CRC-32)
- Flexible I/O features
- Up to 60 GPIOs
- Two 5V-tolerant open-drain IOs
- Two high-drive IOs with 20mA drive strength
- Up to 5 high speed IOs
- Up to 60 GPIOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 64-pin LQFP (PM) (0.5mm pitch)
- 48-pin VQFN (RGZ) (0.5mm pitch)
- 48-pin LQFP (PT) (0.5mm pitch)
- 32-pin VQFN (RHB) (0.5mm pitch)
- 28-pin VSSOP (28DGS) (0.5mm pitch))
- 28-pin DSBGA (YCJ) (0.35mm pitch)
- 24-pin VQFN (RGE) (0.5mm pitch)
- Family members (also see Device Comparison)
- MSPM0G1105: 32KB flash, 16KB RAM
- MSPM0G1106: 64KB flash, 32KB RAM
- MSPM0G1107: 128KB flash, 32KB RAM
- Development kits and software (also see Tools and Software)
MSPM0G110x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform operating at up to 80MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 105°C, and operate with supply voltages ranging from 1.62V to 3.6V.
The MSPM0G110x devices provide up to 128KB embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM with hardware parity option. The devices also incorporate a memory protection unit, 7-channel DMA, and a variety of high-performance analog peripherals such as two 12-bit 4Msps ADCs, configurable internal shared voltage reference, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two 16-bit advanced control timers, five general purpose timers (with one 16-bit general-purpose timer for QEI interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two windowed-watchdog timers, and one RTC with alarm and calendar mode. These devices provide data integrity and encryption peripherals (CRC) and enhanced communication interfaces (four UART, two I2C, two SPI).
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration that allow customers to find the MCU that meets project needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.
MSPM0G110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.
索取更多資訊
現已提供完整的產品規格表、使用指南、軟體開發套件和其他資訊。立即索取
您可能會感興趣的類似產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
LP-MSPM0G3507 — 適用於 80-MHz Arm® Cortex®-M0+ MCU 的 MSPM0G3507 LaunchPad™ 開發套件
LP-MSPM0G3507 LaunchPad™ 開發套件是基於 MSPM0G3507 的易用型評估模組 (EVM)。其包含開始在 MSPM0G3507 M0+ MCU 平台上開發所需的一切，包括用於編程、偵錯和能源量測的板載偵錯探測器。電路板包含三個按鈕、兩個 LED (一個是 RGB LED) 和一個類比溫度感測器和光感測器。此外也具備外部緩衝器，可在 4 MSPS 顯示高速 ADC 性能。
ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器
μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。
在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。
其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。
TMDSEMU110-U — XDS110 JTAG 偵錯探測器
德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別，適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列，可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。 對於針腳上的核心追蹤，則需要 XDS560v2 PRO TRACE。
德州儀器 XDS110 透過 TI 20 針腳連接器（具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器）連接到目標電路板，並透過 USB2.0 (...)
TMDSEMU200-U — XDS200 USB 偵錯探測器
XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。
XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)
LB-3P-TRACE32-ARM — 適用於 Arm® 架構微控制器和處理器的 Lauterbach TRACE32® 偵錯和追蹤系統
Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證各種 Arm® 架構微控制器和處理器。全球知名的嵌入式系統和 SoC 偵錯和追蹤解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。藉由 TRACE32® 偵錯器，開發人員也可透過單一偵錯介面，同時偵錯和控制 SoC 中的任何 C28x/C29x/C6x/C7x DSP 核心及所有其他 Arm (...)
ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具
WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。
MSPM0-DIAGNOSTIC-LIB — MSPM0 diagnostic library
The MSPM0 diagnostic library software development kit (SDK) is a collection of functional safety software to assist customers to meet their functional safety diagnostic requirements.
支援產品和硬體
MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0
The MSPM0 analog configurator is a graphical configuration tool designed to simplify and accelerate the design and enablement of an analog signal chain using a MSPM0 device with no traditional coding development necessary.
The tool uses an intuitive GUI to configure a signal chain using the high (...)
支援產品和硬體
CCSTUDIO-STARTHUB — Example application browser
支援產品和硬體
MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications
MSP Motor Control is a collection of software, tools and examples to spin motors in 30 minutes or less with MSPM0 Arm® Cortex® M0+ MCUs and popular motor driver solutions.
MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and three-phase motors with sensored (...)
支援產品和硬體
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
支援產品和硬體
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.
(...)
支援產品和硬體
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio is a visual design environment that simplifies firmware development, making it possible to configure, develop, and run microcontroller applications in minutes with zero coding and no IDE required. Available as a standalone download or on the cloud.
支援產品和硬體
SYSCONFIG — Standalone desktop version of SysConfig
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
支援產品和硬體
MSPM0-ACADEMY — MSPM0 Academy
支援產品和硬體
GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS
MSP-GANG-SOFTWARE — MSP-GANG Software
支援產品和硬體
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
支援產品和硬體
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| LQFP (PT) | 48 | Ultra Librarian |
| VQFN (RGZ) | 48 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。