TAS5825M
- Flexible audio I/O:
- Supports 32, 44.1, 48, 88.2, 96, 192 kHz sample rates
- I2S, LJ, RJ, or TDM
- SDOUT for audio monitoring, sub-channel or echo cancellation
- Supports 3-wire digital audio interface (no MCLK required)
- High-efficiency Class-D operation
- > 90% Power efficiency, 90 mΩ RDS(on)
- Low quiescent current, <20 mA at PVDD=12V
- Supports multiple output configurations
- 1 × 53 W, 1.0 Mode (4-Ω, 22 V, THD+N=1%)
- 1 × 65 W, 1.0 Mode (4-Ω, 22 V, THD+N=10%)
- 2 × 30 W, 2.0 Mode (8-Ω, 24 V, THD+N=1%)
- 2 × 38 W, 2.0 Mode (8-Ω, 24 V, THD+N=10%)
- Excellent audio performance:
- THD+N ≤ 0.03% at 1 W, 1 kHz, PVDD = 12 V
- SNR ≥ 110 dB (A-weighted), ICN ≤ 35 µVRMS
- Flexible processing features
- 3-Band advanced DRC + AGL,2 × 15 BQs,
- Sound field spatializer (SFS), level meter
- 96-kHz, 192-kHz processor sampling
- Dynamic EQ, Bass enhancement and speaker thermal/excursion protection
- Flexible power supply configurations
- PVDD: 4.5 V to 26.4 V
- DVDD and I/O: 1.8 V or 3.3 V
- Excellent integrated self-protection:
- Over-current error (OCE)
- Cycle-by-cycle current limit
- Over-temperature warning (OTW)
- Over-temperature error (OTE)
- Under and over-voltage lock-out (UVLO/OVLO)
- Easy system integration
- I2C Software control
- Reduced solution size
- Small 5 x 5 mm Package
- Fewer passives required compared to open-loop devices
- No bulky electrolytic capacitors or large inductors required for most applications
The TAS5825M is a stereo high-performance closed-loop Class-D with an integrated audio processor and up to 192-kHz support.
The powerful audio DSP core supports several advanced audio process flows such as 2×15 BQs, 3-Band DRC, Full-band AGL (Automatic Gain Limiter), Smart Amplifier Algorithm (Thermal and Excursion Protection), Bass enhancement, Spatializer, THD manager, PVDD Tracking, and Thermal Foldback. The TAS5825M has a 48-kHz or 96-kHz architecture with an integrated SRC (Sample Rate Convertor) that detects the input sample rate and auto-converts the input sample to the DSP target sample rate to avoid audio artifacts.
要求更多資訊
提供 PurePath™ Console 3、TAS5825M GUI 和其他設計資源。立即索取
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TAS5825M 4.5 V to 26.4 V, 38-W Stereo, Inductor-Less, Digital Input, Closed-Loop Class-D Audio Amplifier with 192-kHz Extended Audio Processing datasheet (Rev. H) | PDF | HTML | 2023年 1月 9日 |
Application note | TAS5825M Design Considerations for EMC (Rev. A) | PDF | HTML | 2021年 7月 12日 | |
Technical article | How smart amps are bringing high-fidelity audio into the smart home | PDF | HTML | 2021年 5月 3日 | |
Application brief | Presence Detection With TAS5825M Using Ultrasound | PDF | HTML | 2020年 9月 14日 | |
White paper | Audio Innovation: Trends in Automotive, Smart Home and Pro Audio Applications | 2019年 8月 21日 | ||
Application note | General Tuning Guide for TAS58xx Family | 2019年 5月 28日 | ||
Application note | TAS5825M Advanced Features | 2018年 12月 6日 | ||
Application note | Load TAS5825M Configurations from EEPROM via SPI | 2018年 8月 10日 | ||
Application note | TAS5825M Process Flows (Rev. A) | 2018年 7月 19日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
PUREPATH-CMBEVM — 適用於音訊系統設計和開發的 PurePath™ Console 主機板
The PurePath™ Console Motherboard (PurePath-CMBEVM) provides a seamless interface between Ti’s latest PurePath Console GUI to supported TI’s digital and mixed-signal audio evaluation modules, including audio amplifiers and audio converters.
The PurePath-CMBEVM is shipped as a stand-alone board. It (...)
TAS5825MEVM — 具有 96kHz/192kHz 延伸處理的數位輸入閉合迴路 D 類音訊放大器評估模組
The TAS5825MEVM showcases the latest TI digital input class-D closed loop amplifier, TAS5825M, with up to 192kHz sampling and extended processing. The EVM is used in conjunction with the PurePath Console motherboard (PUREPATH-CMBEVM) and the PurePath Console 3 software (PUREPATHCONSOLE). There are (...)
TAS5825MEVM-SB — 適用於可擴展 2.1 通道音訊放大器的 TAS5825M 和 TAS5720M 評估板
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TIDA-060026 — 可擴充 2.1 通道音訊放大器參考設計
封裝 | 引腳 | 下載 |
---|---|---|
VQFN (RHB) | 32 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。