產品詳細資料

Device type Transmitter Number of input channels 8 Supply voltage (max) (V) 5.5 Operating temperature range (°C) 0 to 70 Interface type Serial Rating Catalog
Device type Transmitter Number of input channels 8 Supply voltage (max) (V) 5.5 Operating temperature range (°C) 0 to 70 Interface type Serial Rating Catalog
FCCSP (ACP) 196 144 mm² 12 x 12
  • 8-Channel transmitter, each channel includes:
    • 5-level pulser with on-chip beamforming
    • Active T/R switch
    • Integrated floating supplies
  • 5-Level Pulser supports:
    • Maximum output voltage: ±100V
    • Minimum output voltage: ±1V
    • Maximum output current: 2A
    • Support 4A output current mode
    • True return to zero to discharge to ground
    • Second harmonic of –45dBc at 5MHz
    • –3dB Bandwidth with 220Ω || 240pF load
      • –20MHz for a ±100V supply
      • 35MHz for a ±100V supply in 4A
    • Integrated jitter: 100fs from 100Hz to 20kHz
    • CW mode close-in phase noise: –154dBc/Hz at 1kHz offset for 5MHz signal
  • Active T/R switch with:
    • Turn ON resistance: 8Ω
    • Turn ON and OFF time: 300ns
    • Channel based T/R switch on and off controls
  • On-chip beamformer for pulser with:
    • Channel based T/R switch on and off controls
    • Delay resolution: Half beamformer clock period, minimum 1.56ns
    • Maximum delay: 214 beamformer clock period
    • Per channel 960 × 32 bits memory to store waveform and delay values.
  • High-speed (400MHz maximum), 2-lane LVDS serial programming interface
    • Very low programming time: < 500ns for delay profile update
    • 32-bit Checksum feature to detect wrong SPI writes
  • Internal temperature sensor and automatic thermal shutdown
  • No specific power sequencing requirement
  • Error flag register to detect multiple faulty condition
  • Integrated passives for the floating supplies and bias voltages
  • Small package: FCCSP-196 (12mm × 12mm) with 0.8mm pitch
  • 8-Channel transmitter, each channel includes:
    • 5-level pulser with on-chip beamforming
    • Active T/R switch
    • Integrated floating supplies
  • 5-Level Pulser supports:
    • Maximum output voltage: ±100V
    • Minimum output voltage: ±1V
    • Maximum output current: 2A
    • Support 4A output current mode
    • True return to zero to discharge to ground
    • Second harmonic of –45dBc at 5MHz
    • –3dB Bandwidth with 220Ω || 240pF load
      • –20MHz for a ±100V supply
      • 35MHz for a ±100V supply in 4A
    • Integrated jitter: 100fs from 100Hz to 20kHz
    • CW mode close-in phase noise: –154dBc/Hz at 1kHz offset for 5MHz signal
  • Active T/R switch with:
    • Turn ON resistance: 8Ω
    • Turn ON and OFF time: 300ns
    • Channel based T/R switch on and off controls
  • On-chip beamformer for pulser with:
    • Channel based T/R switch on and off controls
    • Delay resolution: Half beamformer clock period, minimum 1.56ns
    • Maximum delay: 214 beamformer clock period
    • Per channel 960 × 32 bits memory to store waveform and delay values.
  • High-speed (400MHz maximum), 2-lane LVDS serial programming interface
    • Very low programming time: < 500ns for delay profile update
    • 32-bit Checksum feature to detect wrong SPI writes
  • Internal temperature sensor and automatic thermal shutdown
  • No specific power sequencing requirement
  • Error flag register to detect multiple faulty condition
  • Integrated passives for the floating supplies and bias voltages
  • Small package: FCCSP-196 (12mm × 12mm) with 0.8mm pitch

The TX08D is a transmitter solution for ultrasound imaging systems. The device supports eight channels with each channel consisting of pulser transmit/receive (T/R) switches.

The TX08D is a transmitter solution for ultrasound imaging systems. The device supports eight channels with each channel consisting of pulser transmit/receive (T/R) switches.

下載 觀看有字幕稿的影片 影片

更多資訊

完整的產品規格表和其他設計資源現已提供。立即申請權限

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TX08D 8-Channel Ultrasound Transmitter datasheet (Rev. A) PDF | HTML 2024年 1月 31日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TX75E16EVM — TX75E16 評估模組

TX75E16 評估模組 (EVM) 用於評估 TX75E16 裝置及其功能。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 引腳 下載
FCCSP (ACP) 196 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片