Startseite Energiemanagement Leistungsschalter Ideale Diode und ODER-verknüpfende Controller
Startseite
Energiemanagement
Leistungsschalter
Ideale Diode und ODER-verknüpfende Controller

LM76202-Q1

AKTIV

Ideale Diode für die Automobilindustrie, 4,2 bis 60 V, 2,2 A, 300 uA Ruhestrom, mit integriertem FET

Jetzt bestellen
Datenblatt

LM76202-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Vin (min) (V) 4.2 Vin (max) (V) 60 Number of channels 1 Features Adjustable current limit, Analog current monitor, Automotive load dump compatibility, Gate ON/OFF control, Inrush current control, Integrated FET, Overvoltage protection, Power good signal, Reverse current blocking, Reverse polarity protection, Short circuit protection, Thermal shutdown Iq (typ) (mA) 0.3 Iq (max) (mA) 0.4 FET Integrated back-to-back FET Operating temperature range (°C) -40 to 125 Design support Calculation Tool, EVM, Simulation Model Rating Automotive Imax (A) 2.2 Shutdown current (ISD) (mA) (A) 0.016 Device type Ideal diode controller Product type Ideal diode controller
Vin (min) (V) 4.2 Vin (max) (V) 60 Number of channels 1 Features Adjustable current limit, Analog current monitor, Automotive load dump compatibility, Gate ON/OFF control, Inrush current control, Integrated FET, Overvoltage protection, Power good signal, Reverse current blocking, Reverse polarity protection, Short circuit protection, Thermal shutdown Iq (typ) (mA) 0.3 Iq (max) (mA) 0.4 FET Integrated back-to-back FET Operating temperature range (°C) -40 to 125 Design support Calculation Tool, EVM, Simulation Model Rating Automotive Imax (A) 2.2 Shutdown current (ISD) (mA) (A) 0.016 Device type Ideal diode controller Product type Ideal diode controller
HTSSOP (PWP) 16 32 mm² 5 x 6.4
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
    • AEC-Q100-012 short circuit reliability Grade A
    • HBM ESD classification level 2
    • CDM ESD classification level C6
  • 4.2-V to 60-V operating voltage, 62-V maximum
  • Integrated reverse input polarity protection down to –60-V
  • Integrated back-to-back MOSFETs with 150 mΩ total RON
  • Transient immunity up-to 65 V
  • 0.1-A to 2.23-A adjustable current limit
    (±5% accuracy at 1 A)
  • Load protection during ISO7637 and ISO16750-2 testing
  • Short to battery and short to ground protection
  • Reverse current blocking for protection from output short to battery
  • IMON current indicator output (±8.5% accuracy)
  • Low quiescent current (285 µA in operating, 16 µA in shutdown)
  • Adjustable UVLO, OVP cut off, inrush current control
  • Factory set 38-V overvoltage clamp option
  • Selectable current-limiting fault response options (auto-retry, latch off, CB modes)
  • Available in easy to use 16-Pin HTSSOP package
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
    • AEC-Q100-012 short circuit reliability Grade A
    • HBM ESD classification level 2
    • CDM ESD classification level C6
  • 4.2-V to 60-V operating voltage, 62-V maximum
  • Integrated reverse input polarity protection down to –60-V
  • Integrated back-to-back MOSFETs with 150 mΩ total RON
  • Transient immunity up-to 65 V
  • 0.1-A to 2.23-A adjustable current limit
    (±5% accuracy at 1 A)
  • Load protection during ISO7637 and ISO16750-2 testing
  • Short to battery and short to ground protection
  • Reverse current blocking for protection from output short to battery
  • IMON current indicator output (±8.5% accuracy)
  • Low quiescent current (285 µA in operating, 16 µA in shutdown)
  • Adjustable UVLO, OVP cut off, inrush current control
  • Factory set 38-V overvoltage clamp option
  • Selectable current-limiting fault response options (auto-retry, latch off, CB modes)
  • Available in easy to use 16-Pin HTSSOP package

The LM76202-Q1 device is a compact, feature-rich 60-V integrated ideal diode with a full suite of protection features. The wide supply input range allows control of 12-V and 24-V automotive battery driven applications. The device withstands and protects the loads from positive and negative supply voltages up to ±60 V. Load, source and device protection are provided with many programmable features including overcurrent, inrush current control, overvoltage and undervoltage thresholds. The internal robust protection control blocks along with the 60-V rating of the device simplifies the system design for ISO standard pulse tesing.

A shutdown pin provides external control for enabling and disabling the internal FETs and places the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault output and precise current monitor output. The MODE pin allows flexibility to configure the device between the three current-limiting fault responses (circuit breaker, latch off, and auto-retry modes). The device monitors V(IN) and V(OUT) to provide reverse current blocking when V(IN) < (V(OUT)-10mV). This function protects system bus from overvoltages during output short to battery faults and also helps in voltage holdup requirements during power fail and brownout conditions.

The device is available in a 5 mm × 4.4 mm 16-pin HTSSOP and is fully specified over a –40°C to +125°C temperature range.

The LM76202-Q1 device is a compact, feature-rich 60-V integrated ideal diode with a full suite of protection features. The wide supply input range allows control of 12-V and 24-V automotive battery driven applications. The device withstands and protects the loads from positive and negative supply voltages up to ±60 V. Load, source and device protection are provided with many programmable features including overcurrent, inrush current control, overvoltage and undervoltage thresholds. The internal robust protection control blocks along with the 60-V rating of the device simplifies the system design for ISO standard pulse tesing.

A shutdown pin provides external control for enabling and disabling the internal FETs and places the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault output and precise current monitor output. The MODE pin allows flexibility to configure the device between the three current-limiting fault responses (circuit breaker, latch off, and auto-retry modes). The device monitors V(IN) and V(OUT) to provide reverse current blocking when V(IN) < (V(OUT)-10mV). This function protects system bus from overvoltages during output short to battery faults and also helps in voltage holdup requirements during power fail and brownout conditions.

The device is available in a 5 mm × 4.4 mm 16-pin HTSSOP and is fully specified over a –40°C to +125°C temperature range.
open-in-new Andere Ideale Diode und ODER-verknüpfende Controller suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Gleiche Funktionalität, gleiche Pinbelegung wie verglichener Baustein
LM74202-Q1 AKTIV Ideale Diode für die Automobilindustrie, 4,2 bis 40 V, 2,2 A, 300 uA Ruhestrom, mit integriertem FET Same functionality and size with 40-V max operating voltage

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Typ Titel Datum
* Data sheet LM76202-Q1 60-V, 2.2-A Integrated Ideal Diode with Overvoltage and Overcurrent Protection datasheet (Rev. A) PDF | HTML 22 Aug 2019
Application note Basics of Ideal Diodes (Rev. B) PDF | HTML 05 Okt 2021
User guide LM76202-Q1 Evaluation Module (Rev. B) 12 Dez 2019
E-book 11 Ways to Protect Your Power Path 03 Jul 2019
Application brief Plug and Play Automotive Protection with Integrated FET Ideal Diode - LM76202-Q1 07 Jun 2019
User guide LM76202-Q1 Evaluation Module 02 Jan 2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM76202-Q1EVM — LM76202-Q1 Evaluierungsmodul für Ideale Dioden

The LM76202-Q1EVM allows reference circuit evaluation of TI's LM76202-Q1 and LM74202-Q1 ideal diodes. The LM76202-Q1 device is 4.5 V to 60 V, 2.23-A ideal diode and the LM74202-Q1 device is 4.5 V to 40 V, 2.23-A ideal diode.  Both devices have reverse battery protection, overvoltage, (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Simulationsmodell

LM76202XQ1 PSPICE Model

SLVMD51.ZIP (306 KB) - PSpice Model
Herunterladen
Berechnungstool

SLVC789 — LM76202-Q1 and LM74202-Q1 Design Calculator

Spreadsheet calculator helpful in selecting the design parameters for the desired application.
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Ideale Diode und ODER-verknüpfende Controller
LM74202-Q1 — Ideale Diode für die Automobilindustrie, 4,2 bis 40 V, 2,2 A, 300 uA Ruhestrom, mit integriertem FET LM76202-Q1 — Ideale Diode für die Automobilindustrie, 4,2 bis 60 V, 2,2 A, 300 uA Ruhestrom, mit integriertem FET
Download-Optionen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Gehäuse Pins Herunterladen
HTSSOP (PWP) 16 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos