Startseite Energiemanagement DC/DC power modules Stromversorgungsmodule (integrierter Induktor)
NEU

TPSM843620

AKTIV

4-V to 18-V input, advanced current mode, 6-A synchronous SWIFT™ step-down power module

Produktdetails

Iout (max) (A) 6 Vin (max) (V) 18 Vin (min) (V) 4 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Rating Catalog Operating temperature range (°C) -40 to 125 Features Adjustable current limit, Enable, Forced PWM, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode ACM/AECM Switching frequency (max) (Hz) 2200000 Switching frequency (min) (Hz) 500000
Iout (max) (A) 6 Vin (max) (V) 18 Vin (min) (V) 4 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Rating Catalog Operating temperature range (°C) -40 to 125 Features Adjustable current limit, Enable, Forced PWM, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode ACM/AECM Switching frequency (max) (Hz) 2200000 Switching frequency (min) (Hz) 500000
USIP (SIT) 15 See data sheet
  • Fixed-frequency, internally-compensated advanced current mode (ACM) control
  • Small form factor 3.5-mm × 3.5-mm × 1.6-mm, 15-pin DFM package MicroSiP power module
  • High-efficiency, integrated 25-mΩ and 6.5-mΩ MOSFETs, inductor and basic passives
  • 4-V to 18-V input voltage range
  • 0.5-V to 5.5 -V output voltage range
  • Three selectable PWM ramp options to optimize the control loop performance
  • Five selectable switching frequencies: 500 kHz, 750 kHz, 1 MHz, 1.5 MHz, and 2.2 MHz
  • Synchronizable to an external clock
  • 0.5-V, ±0.5% voltage reference accuracy over full temperature range
  • Selectable soft-start times: 0.5 ms, 1 ms, 2 ms, and 4 ms
  • Monotonic start-up into prebiased outputs
  • Selectable current limits to support lower current operation
  • Enable with adjustable input undervoltage lockout
  • Power-good output monitor
  • Output overvoltage, output undervoltage, input undervoltage, overcurrent, and overtemperature protection
  • Pin-to-pin compatible with 8 A - TPSM843820 3 A - TPSM843320
  • – 40°C to 125°C operating junction temperature
  • Fixed-frequency, internally-compensated advanced current mode (ACM) control
  • Small form factor 3.5-mm × 3.5-mm × 1.6-mm, 15-pin DFM package MicroSiP power module
  • High-efficiency, integrated 25-mΩ and 6.5-mΩ MOSFETs, inductor and basic passives
  • 4-V to 18-V input voltage range
  • 0.5-V to 5.5 -V output voltage range
  • Three selectable PWM ramp options to optimize the control loop performance
  • Five selectable switching frequencies: 500 kHz, 750 kHz, 1 MHz, 1.5 MHz, and 2.2 MHz
  • Synchronizable to an external clock
  • 0.5-V, ±0.5% voltage reference accuracy over full temperature range
  • Selectable soft-start times: 0.5 ms, 1 ms, 2 ms, and 4 ms
  • Monotonic start-up into prebiased outputs
  • Selectable current limits to support lower current operation
  • Enable with adjustable input undervoltage lockout
  • Power-good output monitor
  • Output overvoltage, output undervoltage, input undervoltage, overcurrent, and overtemperature protection
  • Pin-to-pin compatible with 8 A - TPSM843820 3 A - TPSM843320
  • – 40°C to 125°C operating junction temperature

TPSM843620 is a highly efficient, small, and flexible synchronous step-down DC-DC converter in a MicroSiP power module package that is easy to use. The module operates up to 18-V input with fixed-frequencies that are resistor adjustable by system designer. The embedded IC is internally compensated which reduces external components and design size. The integrated high-frequency capacitor reduces the transient peak at switching node.

The TPSM843620 module employs an internally compensated, fixed-frequency advanced current mode control. The device is capable of providing high efficiency while running at a switching frequency up to 2.2 MHz. The fixed frequency controller can operate from 500 kHz to 2.2 MHz and can be synchronized to an external clock using the SYNC pin. Additional features include a high accuracy voltage reference, selectable soft-start times, monotonic start-up into prebiased outputs, selectable current limits, adjustable UVLO through the EN pin, and a full suite of fault protections.

TPSM843620 is a highly efficient, small, and flexible synchronous step-down DC-DC converter in a MicroSiP power module package that is easy to use. The module operates up to 18-V input with fixed-frequencies that are resistor adjustable by system designer. The embedded IC is internally compensated which reduces external components and design size. The integrated high-frequency capacitor reduces the transient peak at switching node.

The TPSM843620 module employs an internally compensated, fixed-frequency advanced current mode control. The device is capable of providing high efficiency while running at a switching frequency up to 2.2 MHz. The fixed frequency controller can operate from 500 kHz to 2.2 MHz and can be synchronized to an external clock using the SYNC pin. Additional features include a high accuracy voltage reference, selectable soft-start times, monotonic start-up into prebiased outputs, selectable current limits, adjustable UVLO through the EN pin, and a full suite of fault protections.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
NEU TPSM843820 AKTIV Synchron-SWIFT™-Abwärtswandler-Stromversorgungsmodul, 4- bis 18-V-Eingangsspannung, 8 A, erweiterter Optimized for higher current in same form factor

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 5
Typ Titel Datum
* Data sheet TPSM843620 4-V to 18-V Input, 6-A SynchronousSWIFTStep-Down ConverterMicroSiPPower Module With Integrated Inductor and Internally Compensated Advanced Current Mode Control datasheet (Rev. A) PDF | HTML 01 Dez 2023
Application note Detailed Comparison Between TPSM843620 Family and TPS543620 Family PDF | HTML 20 Nov 2023
EVM User's guide TPSM843620 SWIFT™ Step-Down Module Evaluation Module User's Guide PDF | HTML 25 Okt 2023
Certificate TPSM843620EVM EU Declaration of Conformity (DoC) 20 Sep 2023
Application brief Solving Power Design Challenges in Medical Imaging Applications PDF | HTML 12 Jul 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPSM843620EVM — TPSM843620 evaluation module for synchronous buck converter

The TPSM843620 evaluation module (EVM) is a synchronous buck power module designed to provide up to a 6 A output and is rated for 4 V to 18 V. The high-side and low-side MOSFETs are incorporated inside the TPSM843620 package along with the gate-drive circuitry, inductor and basic passives. The low (...)
Benutzerhandbuch: PDF | HTML
Simulationsmodell

TPSM843620 SIMPLIS Model

SLUM878.ZIP (902 KB) - SIMPLIS Model
Berechnungstool

CALC-TOOL-TPSM843X20 CALC-TOOL-TPSM843X20

TPSM843320 TPSM843620 TPSM843820 Calculator Tool
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Stromversorgungsmodule (integrierter Induktor)
TPSM843320 Synchron-SWIFT™-Abwärtswandler-Stromversorgungsmodul, 4- bis 18-V-Eingangsspannung, 3 A, erweiterter TPSM843320E 4 V bis 18 V Eingangsspannung, 3A synchrones SWIFT™-Abwärtsleistungsmodul mit erweite TPSM843620 4-V to 18-V input, advanced current mode, 6-A synchronous SWIFT™ step-down power module TPSM843620E 4 V bis 18 V Eingangsspannung, 6 A synchrones SWIFT™-Abwärtsleistungsmodul mit e TPSM843820 Synchron-SWIFT™-Abwärtswandler-Stromversorgungsmodul, 4- bis 18-V-Eingangsspannung, 8 A, erweiterter TPSM843820E 4 V bis 18 V Eingangsspannung, 8A synchrones SWIFT™-Abwärtsleistungsmodul mit erweite
Gehäuse Pins Herunterladen
USIP (SIT) 15 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos