SimpleLink™ multi-standard CC26x2R wireless MCU LaunchPad™ development kit LAUNCHXL-CC26X2R1 (ACTIVE)
Texas Instruments has updated the SimpleLink CC26x2R LaunchPad to use revision E silicon. The kit will only support v2.40.00.xx of the SimpleLink SDK and later – SimpleLink CC13x2 and CC26x2 SDK.
View more information about hardware and software compatibility for the SimpleLink CC13x2 and CC26x2 Wireless MCUs here.
- CC26X2R LaunchPad Quick Start Guide (Rev. A)
(PDF 700 KB)
31 Jan 2019
This kit supports evaluation of both the SimpleLink Bluetooth® low energy CC2642R wireless MCU and the SimpleLink Multi-Standard CC2652R wireless MCU.
The CC26x2R devices are part of the SimpleLink™ microcontroller (MCU) platform which consists of Wi-Fi®, Bluetooth® Low Energy, Sub-1 GHz, Thread, Zigbee®, 802.15.4 and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. This LaunchPad kit supports programming and debugging from Code Composer Studio™ and IAR Embedded Workbench® integrated development environments (IDEs).
For more information, visit www.ti.com/simplelink.
Bluetooth® Low Energy
Kickstart your development with the SimpleLink CC26x2R LaunchPad and the SimpleLink CC13x2 and CC26x2 SDK, which includes the Texas Instruments royalty-free Bluetooth low energy (BLE) software protocol stack (BLE5-Stack) component supporting development of single-mode Bluetooth 5 applications on the ARM® Cortex®-M4F based CC2652R and CC242R. TI offers support for long range mode, high speed mode, advertising extensions, and up to 32 connections.
Launch your development of Thread-based applications with the SimpleLink CC13x2 and CC26x2R SDK, which includes tools, application examples, documentation and source code of the Thread 1.1 networking protocol based on openthread, an open-source implementation of the Thread networking stack. Example applications such as a door lock, window shades, thermostat and temperature sensor applications, based on Constrained Application Protocol (CoAP) running atop of the Thread networking stack are released to kick-start the SW design of end equipment sets.
The SimpleLink SDK Zigbee stack contains everything needed for a Zigbee compliant solution, including tools, application examples, documentation, and source code. It also includes a Zigbee Pro compliant Zigbee stack, as well as Green Power (GP) device and sink support. Example applications include door lock, light, switch, temperature sensor and thermostat, and are Zigbee certification-ready. The Zigbee stack also includes support for Zigbee Network Processor configuration, which can be used in two chip architectures where the host implements the Cluster Library and the Zigbee applications.
- Access all I/O signals with the BoosterPack connectors
- Upgrade the LaunchPad firmware over-the-air from the SimpleLink Starter app
- Expand functionality with one of the BoosterPacks available