This register is configuration register 0 for channel 5.
|7||CH5_INTYP||RW||0h||Channel 5 input type.
0d = Microphone input
1d = Line input
|6-5||CH5_INSRC[1:0]||RW||0h||Channel 5 input configuration.
0d = Analog differential input
1d = Analog single-ended input
2d = Reserved
|4||CH5_DC||RW||1h||Channel 5 input coupling.
0d = AC-coupled input
1d = DC-coupled input
|3||CH5_MIC_IN_RANGE||RW||0h||Channel 5 microphone input range.
0d = Low swing mode; Differential input AC signal full-scale of 2-VRMS supported provided DC differential common mode voltage IN1P - IN1M < 4.2 V. Single-ended AC signal 1-VRMS supported provided DC common mode voltage is < 2.1 V.
1d = High swing mode; Differential Input IN1P-IN1M peak voltage up to 14.14 V or single ended 7.07 V supported. User rquired to adjust the channel gain and digital volume control based on the max signal level used in system.
|2-1||CH5_PGA_CFG[1:0]||RW||0h||Channel 5 CMRR Configuration.
0d = High SNR performance mode
1d = Reserved
2d = High CMRR performance mode
3d = Reserved
|0||CH5_AGCEN||RW||0h||Channel 5 automatic gain controller (AGC) setting.
0d = AGC disabled
1d = AGC enabled based on the configuration of bit 3 in register 108 (P0_R108); This must be used only with AC-coupled input