SBOS891B October   2018  – April 2021 TMP144

PRODUCTION DATA  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 UART Interface Timing
    7. 6.7 Timing Diagrams
    8. 6.8 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Power Up
      2. 7.3.2 Digital Temperature Output
      3. 7.3.3 Timeout Function
    4. 7.4 Device Functional Modes
      1. 7.4.1 Continuous Conversion Mode
      2. 7.4.2 Shutdown Mode
      3. 7.4.3 One-Shot Mode
      4. 7.4.4 Extended Temperature Mode
      5. 7.4.5 Temperature Alert Function
      6. 7.4.6 Interrupt Functionality
    5. 7.5 SMAART Wire / UART Interface
      1. 7.5.1 Communication Protocol
      2. 7.5.2 Global Software Reset
      3. 7.5.3 Global Initialization and Address Assignment Sequence
      4. 7.5.4 Global Clear Interrupt
      5. 7.5.5 Global Read and Write
      6. 7.5.6 Individual Read and Write
    6. 7.6 Register Maps
      1. 7.6.1 Temperature Result Register (P[1:0] = 00) [reset = 0000h]
      2. 7.6.2 Configuration Register (P[1:0] = 01) [reset = 0200h]
      3. 7.6.3 Temperature Low Limit Register (P[1:0] = 10) [reset = F600h]
      4. 7.6.4 Temperature High Limit Register (P[1:0] = 11) [reset = 3C00h]
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Trace Length
        2. 8.2.2.2 Voltage Drop Effect
        3. 8.2.2.3 Power Supply Noise Filtering
      3. 8.2.3 Application Curves
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Device Nomenclature
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 Support Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Power Supply Recommendations

The TMP144 operates on a power-supply range from 1.4 V to 3.6 V. The device is trimmed for operation at a 3.3-V supply, but the TMP144 can measure temperature accurately in the full supply range.

The TMP144 is a very low-power device and generates very low noise on the supply bus. Applying a bypass capacitor to the V+ pin of the TMP144 can further reduce any noise the TMP144 might propagate to other components. Use a CF capacitor with a value greater than 0.1 μF as shown in Figure 9-1. Place the bypass capacitor as close to the supply and ground pins of the device as possible for best results.

GUID-5B5760E0-0901-4219-A5F8-1FEC504E88D7-low.gif Figure 9-1 Power Supply Noise Reduction With a Bypass Capacitor