SBASB22 December   2025 ADS9324

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Switching Characteristics
    8. 5.8 Timing Diagrams
  7. 6 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Analog Inputs
      2. 7.3.2  Input Clamp Protection Circuit
      3. 7.3.3  Analog Input Impedance
      4. 7.3.4  Programmable Gain Amplifier (PGA)
      5. 7.3.5  ADC Transfer Function
      6. 7.3.6  Reference
      7. 7.3.7  Open Wire Safe Mode
      8. 7.3.8  System Offset Calibration
      9. 7.3.9  System Gain Calibration
      10. 7.3.10 ADC Gain and Offset Error Calibration
      11. 7.3.11 Digital Filter
        1. 7.3.11.1 System Phase Calibration
        2. 7.3.11.2 Block Average Filter
        3. 7.3.11.3 Moving Average Filter
        4. 7.3.11.4 Low-Pass FIR Filter
      12. 7.3.12 Digital Window Comparator
      13. 7.3.13 Alarm Modes
      14. 7.3.14 Data Interface
        1. 7.3.14.1 ADC Channel Modes
        2. 7.3.14.2 Daisy Chain
        3. 7.3.14.3 Diagnostic Flags
        4. 7.3.14.4 ADC Output Data Randomizer
        5. 7.3.14.5 Test Patterns for Data Interface
        6. 7.3.14.6 Digital Output Drive Strength Control
        7. 7.3.14.7 Digital Output Delay Adjustment
    4. 7.4 Device Functional Modes
      1. 7.4.1 Reset
      2. 7.4.2 Normal Operation
      3. 7.4.3 Standby Mode
    5. 7.5 Programming
      1. 7.5.1 Register Write Operation
      2. 7.5.2 Register Read Operation
      3. 7.5.3 Initialization Example - Single Lane Mode on SDOUT
  9. 8 Register Maps
    1. 8.1 ADS93xx Common Registers
    2. 8.2 AIN1 - AIN8 Channel Registers
    3. 8.3 AIN9 - AIN16 Channel Registers
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 16-Channel, Data Acquisition System (DAQ) for Power Automation
        1. 9.2.1.1 Application Curve
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
        1. 9.4.1.1 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Mechanical Data

5.6 Timing Requirements

at AVDD_5V = 4.75V to 5.25V, AVDD_1V8 = 1.7V to 1.9V, IOVDD = 1.7V to 3.6V, VREF = 4.096V (internal or external), and maximum throughput (unless otherwise noted); minimum and maximum values at TA = –40°C to +125°C; typical values at TA = 25°C
MIN MAX UNIT
CONVST
fCONVST Sampling frequency 0.1 1 MHz
tCONVST Sampling time interval (1 / fCONVST) 1 µs
tPL_CV CONVST pulse high time 50 ns
tPH_CV CONVST pulse low time 50 ns
tsu_CV_hi_DRDY_hi Setup time: CONVST rising to the DRDY rising(1) 50 ns
SERIAL INTERFACE
fSCLK Maximum SCLK frequency 60 MHz
tSCLK Minimum SCLK time period 16 ns
tPH_SCLK SCLK high time 0.45 0.55 tSCLK
tPL_SCLK SCLK low time 0.45 0.55 tSCLK
thi_CS Pulse duration: CS high 16 ns
tsu_CSCK Setup time: CS falling to the first SCLK capture edge 16 ns
tht_CSCK Hold time: last SCLK falling edge to CS rising time 16 ns
tsu_CKDI Setup time: SDI data valid to the corresponding SCLK rising edge 3 ns
tht_CKDI Hold time: SCLK rising edge to corresponding data valid on SDI 1 ns
tsu_DRDYCS Setup time: DRDY rising edge to CS falling edge 0 ns
tht_DRDYCS Hold time: DRDY rising edge to CS rising edge 0 ns
(1) Applicable only for internal clock oversampling mode.