SLUUDD2 June   2026

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Hardware Requirements for NVM Programming
  6. 3Typical NVM Flow
  7. 4Programming Instructions
    1. 4.1 Connecting to the I2C address
  8. 5Register Configuration
    1. 5.1  Configuring Enable Settings
    2. 5.2  Configuring the Bucks
    3. 5.3  Configuring LDOs
    4. 5.4  Configuring Sequence
    5. 5.5  Configuring GPIOs
    6. 5.6  Configuring Multi-Function Pins
    7. 5.7  Configuring the EN/PB/VSENSE Pin
    8. 5.8  Changing I2C Address
    9. 5.9  Configuring Mask Settings
    10. 5.10 Exporting an NVM Configuration File
    11. 5.11 Loading a NVM Configuration File to PMIC
  9. 6NVM Programming
  10. 7Non-NVM Registers
  11. 8TPS6521405 default settings
  12.   A References

Trademarks

TI E2E™ is a trademark of Texas Instruments.

All trademarks are the property of their respective owners.