SLVSIR8 June 2026 TPS61383-Q1
PRODUCTION DATA
The TPS61383-Q1 enters down mode when the BUB voltage is higher than output voltage during boost mode. During down mode. TPS61383-Q1 high-side and low-side FETs works the same way as in boost operation, while the isolation FET Q3 is regulated in saturation region during high side on phase. This down mode operation allows the device to regulate the output voltage at target value even when VBUB > VOUT.
With the Q3 operates in saturation region, down mode generates a lot of loss and heat compared to normal boost operation. Therefore current limit threshold is reduced in down mode to avoid overheating. When BUB-VOUT is over 8V, the peak inductor current is limited to 2.33A. When BUB-VOUT is between 4 – 8V, the peak current limit is 2.95A. When BUB-VOUT is between 0 – 4V, the peak current limit is 4.41A. Also, because of the high loss and low efficiency, this mode is only for start-up and output short protection. Avoid VBUB > VOUT condition during normal operation.