SLVUDA2 July   2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8.   General Texas Instruments High Voltage Evaluation (TI HV EVM) User Safety Guidelines
  9. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Test Points
    3. 2.3 Setup
      1. 2.3.1 Reference Voltage
        1. 2.3.1.1 Configuration 1: REFA and REFB = GND
        2. 2.3.1.2 Configuration 2: OPA CH A Bias REFA and REFB
        3. 2.3.1.3 Configuration 3: REFA and REFB Bias Independently
      2. 2.3.2 Current Sensing
      3. 2.3.3 Input Filtering
      4. 2.3.4 Output Load
    4. 2.4 Best Practices
  10. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  11. 4Additional Information
    1. 4.1 Trademarks
    2. 4.2 Related Documentation

3.3 Bill of Materials (BOM)

DESIGNATOR QUANTITY VALUE DESCRIPTION PACKAGE REFERENCE PART NUMBER MANUFACTURER
C1, C2, C7, C8 4 0.1uF CAP, CERM, 0.1µF, 50V,+/- 20%, X7R, 0805 0805 CL21B104MBCNNNC Samsung
C11, C12 2 1uF CAP, CERM, 1µF, 50V,+/- 20%, X7R, AEC-Q200 Grade 1, 0805 0805 GCJ21BR71H105MA01L MuRata
H1, H2, H3, H4 4 Bumpon, Hemisphere, 0.44 X 0.20, Clear Transparent Bumpon SJ-5303 (CLEAR) 3M
J1 1 Standard Banana Jack, insulated, 10A, red 571-0500 571-0500 DEM Manufacturing
J2, J15 2 Standard Banana Jack, insulated, 10A, black 571-0100 571-0100 DEM Manufacturing
J3 1 Standard Banana Jack, insulated, 10A, yellow 571-0700 571-0700 DEM Manufacturing
J5 1 Banana Jack Connector Standard Banana Solder Red CONN_BANANA_JACK FCR7350R CLIFF Electronic Components
J6 1 Standard Banana Jack, insulated, 10A, white 571-0600 571-0600 DEM Manufacturing
J7 1 Banana Jack Connector Standard Banana Solder Black CONN_BANANA_JACK FCR7350B CLIFF Electronic Components
J10, J12 2 Header, 2.54mm, 2x1, Tin, TH Header, 2.54mm, 2x1, TH TSW-102-23-T-S Samtec
J11, J13, J14 3 Header, 2.54mm, 3x1, Gold, TH Header, 2.54mm, 3x1, TH HMTSW-103-07-G-S-240 Samtec
R1, R3, R5 3 0 RES, 0, 5%, 0.125W, AEC-Q200 Grade 0, 0805 0805 ERJ-6GEY0R00V Panasonic
SH-J10, SH-J11, SH-J12, SH-J13, SH-J14 5 Shunt, 2.54mm, Gold, Black Shunt, 2.54mm, Black 60900213421 Wurth Elektronik
TP1, TP2, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 10 Test Point, Compact, Black, TH Black Compact Testpoint 5006 Keystone Electronics
TP3, TP10 2 Test Point, Compact, Yellow, TH Yellow Compact Testpoint 5009 Keystone Electronics
TP4, TP5, TP13 3 Test Point, Compact, Red, TH Red Compact Testpoint 5005 Keystone Electronics
TP6, TP8, TP9, TP11, TP14 5 Test Point, Compact, White, TH White Compact Testpoint 5007 Keystone Electronics
TP7, TP12, TP15 3 Test Point, Compact, Grey, TH TestPoint, Grey, 220mil, TH 5123 Keystone Electronics
U1 1 Radiation-Hardened, High Common-Mode Voltage Difference Amplifier CFP8 INA1H94HKX/EM Texas Instruments
C3, C6 0 0.01uF CAP, CERM, 0.01uF, 250V, +/- 10%, X7R, 0805 0805 GRM21BR72E103KW03L MuRata
C4 0 0.1uF CAP, CERM, 0.1uF, 250V, +/- 10%, X7T, 0805 0805 C2012X7T2E104K125AA TDK
C5, C9, C10 0 100pF CAP, CERM, 100pF, 50V,+/- 5%, C0G/NP0, 0805 0805 8.85012E+11 Wurth Elektronik
FID1, FID2, FID3 0 Fiducial mark. There is nothing to buy or mount. N/A N/A N/A
J4, J8, J9 0 Connector, End launch SMA, 50 ohm, SMT SMA End Launch 142-0701-851 Cinch Connectivity
R2 0 0.1 RES, 0.1, 1%, 0.5W, AEC-Q200 Grade 1, 1206 1206 UR73V2BTTDR100F KOA Speer
R4, R6, R8, R9, R11, R12, R13 0 10.0k RES, 10.0k, 0.1%, 0.125W, 0805 0805 RT0805BRD0710KL Yageo America
R7, R10 0 0 RES, 0, 5%, 0.125W, AEC-Q200 Grade 0, 0805 0805 ERJ-6GEY0R00V Panasonic
U2 0 11MHz, Precision, Low-Noise, RRO, JFET Op Amp in Space‑Enhanced Plastic TSSOP14 OPA4H014PWSEP Texas Instruments