SNAS739E June   2018  – December 2025 LMX2615-SP

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Timing Diagrams
    8. 5.8 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1  Reference Oscillator Input
      2. 6.3.2  Reference Path
        1. 6.3.2.1 OSCin Doubler (OSC_2X)
        2. 6.3.2.2 Pre-R Divider (PLL_R_PRE)
        3. 6.3.2.3 Post-R Divider (PLL_R)
      3. 6.3.3  State Machine Clock
      4. 6.3.4  PLL Phase Detector and Charge Pump
      5. 6.3.5  N Divider and Fractional Circuitry
      6. 6.3.6  MUXout Pin
        1. 6.3.6.1 Serial Data Output for Readback
        2. 6.3.6.2 Lock Detect Indicator Set as Type “VCOCal”
        3. 6.3.6.3 Lock Detect Indicator Set as Type “Vtune and VCOCal”
      7. 6.3.7  VCO (Voltage-Controlled Oscillator)
        1. 6.3.7.1 VCO Calibration
        2. 6.3.7.2 Watchdog Feature
        3. 6.3.7.3 RECAL Feature
        4. 6.3.7.4 Determining the VCO Gain
      8. 6.3.8  Channel Divider
      9. 6.3.9  Output Buffer
      10. 6.3.10 Powerdown Modes
      11. 6.3.11 Treatment of Unused Pins
      12. 6.3.12 Phase Synchronization
        1. 6.3.12.1 General Concept
        2. 6.3.12.2 Categories of Applications for SYNC
        3. 6.3.12.3 Procedure for Using SYNC
        4. 6.3.12.4 SYNC Input Pin
      13. 6.3.13 Phase Adjust
      14. 6.3.14 Fine Adjustments for Phase Adjust and Phase SYNC
      15. 6.3.15 SYSREF
      16. 6.3.16 Pin Modes
    4. 6.4 Device Functional Modes
    5. 6.5 Programming
      1. 6.5.1 Recommended Initial Power-Up Sequence
      2. 6.5.2 Recommended Sequence for Changing Frequencies
    6. 6.6 Register Maps
      1. 6.6.1 Register Map
        1. 6.6.1.1  R0 Register (Offset = 0x0) [reset = 0x241C]
        2. 6.6.1.2  R1 Register (Offset = 0x1) [reset = 0x80C]
        3. 6.6.1.3  R2 Register (Offset = 0x2) [reset = 0x500]
        4. 6.6.1.4  R3 Register (Offset = 0x3) [reset = 0x642]
        5. 6.6.1.5  R4 Register (Offset = 0x4) [reset = 0xE43]
        6. 6.6.1.6  R5 Register (Offset = 0x5) [reset = 0x3E8]
        7. 6.6.1.7  R6 Register (Offset = 0x6) [reset = 0x7802]
        8. 6.6.1.8  R7 Register (Offset = 0x7) [reset = 0xB2]
        9. 6.6.1.9  R8 Register (Offset = 0x8) [reset = 0x2000]
        10. 6.6.1.10 R9 Register (Offset = 0x9) [reset = 0x1604]
        11. 6.6.1.11 R10 Register (Offset = 0xA) [reset = 0x10D8]
        12. 6.6.1.12 R11 Register (Offset = 0xB) [reset = 0x18]
        13. 6.6.1.13 R12 Register (Offset = 0xC) [reset = 0x5001]
        14. 6.6.1.14 R13 Register (Offset = 0xD) [reset = 0x4000]
        15. 6.6.1.15 R14 Register (Offset = 0xE) [reset = 0x1E70]
        16. 6.6.1.16 R15 Register (Offset = 0xF) [reset = 0x64F]
        17. 6.6.1.17 R16 Register (Offset = 0x10) [reset = 0x80]
        18. 6.6.1.18 R17 Register (Offset = 0x11) [reset = 0x12C]
        19. 6.6.1.19 R18 Register (Offset = 0x12) [reset = 0x64]
        20. 6.6.1.20 R19 Register (Offset = 0x13) [reset = 0x27B7]
        21. 6.6.1.21 R20 Register (Offset = 0x14) [reset = 0xF848]
        22. 6.6.1.22 R21 Register (Offset = 0x15) [reset = 0x401]
        23. 6.6.1.23 R22 Register (Offset = 0x16) [reset = 0x1]
        24. 6.6.1.24 R23 Register (Offset = 0x17) [reset = 0x7C]
        25. 6.6.1.25 R24 Register (Offset = 0x18) [reset = 0x71A]
        26. 6.6.1.26 R25 Register (Offset = 0x19) [reset = 0x624]
        27. 6.6.1.27 R26 Register (Offset = 0x1A) [reset = 0xDB0]
        28. 6.6.1.28 R27 Register (Offset = 0x1B) [reset = 0x2]
        29. 6.6.1.29 R28 Register (Offset = 0x1C) [reset = 0x488]
        30. 6.6.1.30 R29 Register (Offset = 0x1D) [reset = 0x318C]
        31. 6.6.1.31 R30 Register (Offset = 0x1E) [reset = 0x318C]
        32. 6.6.1.32 R31 Register (Offset = 0x1F) [reset = 0x43EC]
        33. 6.6.1.33 R32 Register (Offset = 0x20) [reset = 0x393]
        34. 6.6.1.34 R33 Register (Offset = 0x21) [reset = 0x1E21]
        35. 6.6.1.35 R34 Register (Offset = 0x22) [reset = 0x0]
        36. 6.6.1.36 R35 Register (Offset = 0x23) [reset = 0x4]
        37. 6.6.1.37 R36 Register (Offset = 0x24) [reset = 0x46]
        38. 6.6.1.38 R37 Register (Offset = 0x25) [reset = 0x404]
        39. 6.6.1.39 R38 Register (Offset = 0x26) [reset = 0xFD51]
        40. 6.6.1.40 R39 Register (Offset = 0x27) [reset = 0xDA80]
        41. 6.6.1.41 R40 Register (Offset = 0x28) [reset = 0x0]
        42. 6.6.1.42 R41 Register (Offset = 0x29) [reset = 0x0]
        43. 6.6.1.43 R42 Register (Offset = 0x2A) [reset = 0x0]
        44. 6.6.1.44 R43 Register (Offset = 0x2B) [reset = 0x0]
        45. 6.6.1.45 R44 Register (Offset = 0x2C) [reset = 0x1FA3]
        46. 6.6.1.46 R45 Register (Offset = 0x2D) [reset = 0xC8DF]
        47. 6.6.1.47 R46 Register (Offset = 0x2E) [reset = 0x7FD]
        48. 6.6.1.48 R47 Register (Offset = 0x2F) [reset = 0x300]
        49. 6.6.1.49 R48 Register (Offset = 0x30) [reset = 0x300]
        50. 6.6.1.50 R49 Register (Offset = 0x31) [reset = 0x4180]
        51. 6.6.1.51 R50 Register (Offset = 0x32) [reset = 0x0]
        52. 6.6.1.52 R51 Register (Offset = 0x33) [reset = 0x80]
        53. 6.6.1.53 R52 Register (Offset = 0x34) [reset = 0x420]
        54. 6.6.1.54 R53 Register (Offset = 0x35) [reset = 0x0]
        55. 6.6.1.55 R54 Register (Offset = 0x36) [reset = 0x0]
        56. 6.6.1.56 R55 Register (Offset = 0x37) [reset = 0x0]
        57. 6.6.1.57 R56 Register (Offset = 0x38) [reset = 0x0]
        58. 6.6.1.58 R57 Register (Offset = 0x39) [reset = 0x20]
        59. 6.6.1.59 R58 Register (Offset = 0x3A) [reset = 0x8001]
        60. 6.6.1.60 R59 Register (Offset = 0x3B) [reset = 0x1]
        61. 6.6.1.61 R60 Register (Offset = 0x3C) [reset = 0x9C4]
        62. 6.6.1.62 R61 Register (Offset = 0x3D) [reset = 0xA8]
        63. 6.6.1.63 R62 Register (Offset = 0x3E) [reset = 0x322]
        64. 6.6.1.64 R63 Register (Offset = 0x3F) [reset = 0x0]
        65. 6.6.1.65 R64 Register (Offset = 0x40) [reset = 0x1388]
        66. 6.6.1.66 R65 Register (Offset = 0x41) [reset = 0x0]
        67. 6.6.1.67 R66 Register (Offset = 0x42) [reset = 0x1F4]
        68. 6.6.1.68 R67 Register (Offset = 0x43) [reset = 0x0]
        69. 6.6.1.69 R68 Register (Offset = 0x44) [reset = 0x3E8]
        70. 6.6.1.70 R69 Register (Offset = 0x45) [reset = 0x0]
        71. 6.6.1.71 R70 Register (Offset = 0x46) [reset = 0xC350]
        72. 6.6.1.72 R71 Register (Offset = 0x47) [reset = 0x80]
        73. 6.6.1.73 R72 Register (Offset = 0x48) [reset = 0x1]
        74. 6.6.1.74 R73 Register (Offset = 0x49) [reset = 0x3F]
        75. 6.6.1.75 R74 Register (Offset = 0x4A) [reset = 0x0]
        76. 6.6.1.76 R75 Register (Offset = 0x4B) [reset = 0x800]
        77. 6.6.1.77 R76 Register (Offset = 0x4C) [reset = 0xC]
        78. 6.6.1.78 R77 Register (Offset = 0x4D) [reset = 0x0]
        79. 6.6.1.79 R78 Register (Offset = 0x4E) [reset = 0x64]
        80. 6.6.1.80 R79 - R104 Register (Offset = 0x4F - 0x68) [reset = 0x0]
        81. 6.6.1.81 R105 Register (Offset = 0x69) [reset = 0x4440]
        82. 6.6.1.82 R106 Register (Offset = 0x6A) [reset = 0x7]
        83. 6.6.1.83 R107 - R109 Register (Offset = 0x6B - 0x6D) [Read only]
        84. 6.6.1.84 R110 Register (Offset = 0x6E) [Read only]
        85. 6.6.1.85 R111 Register (Offset = 0x6F) [Read only]
        86. 6.6.1.86 R112 Register (Offset = 0x70) [Read only]
        87. 6.6.1.87 R113 Register (Offset = 0x71) [Read only]
        88. 6.6.1.88 R114 Register (Offset = 0x72) [reset = 0x26F]
  8. 7 Application and Implementation
    1. 7.1 Application Information
      1. 7.1.1 OSCin Configuration
      2. 7.1.2 OSCin Slew Rate
      3. 7.1.3 RF Output Buffer Power Control
      4. 7.1.4 RF Output Buffer Pullup
        1. 7.1.4.1 Resistor Pullup
        2. 7.1.4.2 Inductor Pullup
        3. 7.1.4.3 Combination Pullup
      5. 7.1.5 RF Output Treatment for the Complimentary Side
        1. 7.1.5.1 Single-Ended Termination of Unused Output
        2. 7.1.5.2 Differential Termination
    2. 7.2 External Loop Filter
    3. 7.3 Typical Application
      1. 7.3.1 Design Requirements
      2. 7.3.2 Detailed Design Procedure
      3. 7.3.3 Application Curve
    4. 7.4 Power Supply Recommendations
    5. 7.5 Layout
      1. 7.5.1 Layout Guidelines
      2. 7.5.2 Layout Example
      3. 7.5.3 Footprint Example on PCB Layout
      4. 7.5.4 Radiation Environments
        1. 7.5.4.1 Total Ionizing Dose
        2. 7.5.4.2 Single Event Effect
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Development Support
    2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation
    3. 8.3 Receiving Notification of Documentation Updates
    4. 8.4 Support Resources
    5. 8.5 Trademarks
    6. 8.6 Electrostatic Discharge Caution
    7. 8.7 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information
    1. 10.1 Engineering Samples

Register Map

Table 6-17 Complete Register Map Table
REG D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 POR
R0 0 VCO_
PHASE
_SYNC
1 0 0 0 OUT_
MUTE
FCAL_
HPFD_ADJ
0 0 1 FCAL_
EN
MUXOUT
_LD_
SEL
RESET POWERDOWN 0x241C
R1 0 0 0 0 1 0 0 0 0 0 0 0 MUXOUT
_CTRL
CAL_CLK_DIV 0x80C
R2 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0x500
R3 0 0 0 0 0 1 1 0 0 1 0 0 0 0 1 0 0x642
R4 0 0 0 0 1 1 1 0 0 1 0 0 0 0 1 1 0xE43
R5 0 0 0 0 0 0 1 1 1 1 1 0 1 0 0 0 0x3E8
R6 0 1 1 1 1 0 0 0 0 0 0 0 0 0 1 0 0x7802
R7 0 0 0 0 0 0 0 0 1 0 1 1 0 0 1 0 0xB2
R8 0 VCO_
DACISET
_FORCE
1 0 VCO_
CAPCTRL
_FORCE
0 0 0 0 0 0 0 0 0 0 0 0x2000
R9 0 0 0 OSC
_2X
0 1 1 0 0 0 0 0 0 1 0 0 0x1604
R10 0 0 0 1 0 0 0 0 1 1 0 1 1 0 0 0 0x10D8
R11 0 0 0 0 PLL_R 1 0 0 0 0x18
R12 0 1 0 1 0 0 0 0 PLL_R_PRE 0x5001
R13 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x4000
R14 0 0 0 1 1 1 1 0 0 CPG 0 0 0 0 0x1E70
R15 0 0 0 0 0 1 1 0 0 1 0 0 1 1 1 1 0x64F
R16 0 0 0 0 0 0 0 VCO_DACISET 0x80
R17 0 0 0 0 0 0 0 1 0 0 1 0 1 1 0 0 0x12C
R18 0 0 0 0 0 0 0 0 0 1 1 0 0 1 0 0 0x64
R19 0 0 1 0 0 1 1 1 VCO_CAPCTRL 0x27B7
R20 1 1 VCO_SEL VCO_
SEL_
FORCE
0 0 0 1 0 0 1 0 0 0 0xF848
R21 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 1 0x401
R22 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0x1
R23 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0x7C
R24 0 0 0 0 0 1 1 1 0 0 0 1 1 0 1 0 0x71A
R25 0 0 0 0 0 1 1 0 0 0 1 0 0 1 0 0 0x624
R26 0 0 0 0 1 1 0 1 1 0 1 1 0 0 0 0 0xDB0
R27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0x2
R28 0 0 0 0 0 1 0 0 1 0 0 0 1 0 0 0 0x488
R29 0 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0x318C
R30 0 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0x318C
R31 0 SEG1_
EN
0 0 0 0 1 1 1 1 1 0 1 1 0 0 0x43EC
R32 0 0 0 0 0 0 1 1 1 0 0 1 0 0 1 1 0x393
R33 0 0 0 1 1 1 1 0 0 0 1 0 0 0 0 1 0x1E21
R34 0 0 0 0 0 0 0 0 0 0 0 0 0 PLL_N[18:16] 0x0
R35 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0x4
R36 PLL_N[15:0] 0x46
R37 1 0 PFD_DLY_SEL 0 0 0 0 0 1 0 0 0x404
R38 PLL_DEN[31:16] 0xFD51
R39 PLL_DEN[15:0] 0xDA80
R40 MASH_SEED[31:16] 0x0
R41 MASH_SEED[15:0] 0x0
R42 PLL_NUM[31:16] 0x0
R43 PLL_NUM[15:0] 0x0
R44 0 0 OUTA_PWR OUTB
_PD
OUTA
_PD
MASH_RESET_N 0 0 MASH_ORDER 0x1FA3
R45 1 1 0 OUTA_MUX 0 0 0 1 1 OUTB_PWR 0xC8DF
R46 0 0 0 0 0 1 1 1 1 1 1 1 1 1 OUTB_MUX 0x7FD
R47 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0x300
R48 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0x300
R49 0 1 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0x4180
R50 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R51 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0x80
R52 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0x420
R53 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R54 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R55 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R56 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R57 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0x20
R58 INPIN_
IGNORE
0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0x8001
R59 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 LD_
TYPE
0x1
R60 LD_DLY 0x9C4
R61 0 0 0 0 0 0 0 0 1 0 1 0 1 0 0 0 0xA8
R62 0 0 0 0 0 0 1 1 0 0 1 0 0 0 1 0 0x322
R63 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R64 0 0 0 1 0 0 1 1 1 0 0 0 1 0 0 0 0x1388
R65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R66 0 0 0 0 0 0 0 1 1 1 1 1 0 1 0 0 0x1F4
R67 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R68 0 0 0 0 0 0 1 1 1 1 1 0 1 0 0 0 0x3E8
R69 MASH_RST_COUNT[31:16] 0x0
R70 MASH_RST_COUNT[15:0] 0xC350
R71 0 0 0 0 0 0 0 0 SYSREF_DIV_PRE SYSREF
_PULSE
SYSREF
_EN
SYSREF_REPEAT 0 0 0x80
R72 0 0 0 0 0 SYSREF_DIV 0x1
R73 0 0 0 0 JESD_DAC2_CTRL JESD_DAC1_CTRL 0x3F
R74 SYSREF_PULSE_CNT JESD_DAC4_CTRL JESD_DAC3_CTRL 0x0
R75 0 0 0 0 1 CHDIV 0 0 0 0 0 0 0x800
R76 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0xC
R77 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R78 0 0 0 0 0 0 0 0 0 1 1 0 0 1 0 0 0x64
R79 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R80 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R81 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R82 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R83 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R84 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R86 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R87 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R88 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R89 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R91 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R92 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R93 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R94 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R95 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R96 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R97 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R98 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R100 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R101 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R102 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R103 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R104 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0
R105 0 1 0 0 0 1 0 0 0 1 0 0 0 0 0 0 0x4440
R106 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0x7
R107 - - - - - - - - - - - - - - - - Read
R108 - - - - - - - - - - - - - - - - Read
R109 - - - - - - - - - - - - - - - - Read
R110 0 0 0 0 0 rb_LD_VTUNE - rb_VCO_SEL - - - - - Read
R111 0 0 0 0 0 0 0 0 rb_VCO_CAPCTRL Read
R112 0 0 0 0 0 0 0 rb_VCO_DACISET Read
R113 rb_IO_STATUS Read
R114 0 0 0 0 0 0 WD_DLY WD_CNTRL 0x26F

Table 6-18 lists the memory-mapped registers for the Device registers.

Table 6-18 Device Registers
OffsetAcronymRegister NameSection
0x0R0 Go
0x1 R1 Go
0x2 R2 Go
0x3 R3 Go
0x4 R4 Go
0x5 R5 Go
0x6 R6 Go
0x7 R7 Go
0x8R8Go
0x9R9Go
0xA R10 Go
0xBR11Go
0xCR12Go
0xD R13 Go
0xER14Go
0xF R15 Go
0x10R16Go
0x11 R17 Go
0x12 R18 Go
0x13R19Go
0x14R20Go
0x15 R21 Go
0x16 R22 Go
0x17 R23 Go
0x18 R24 Go
0x19 R25 Go
0x1A R26 Go
0x1B R27 Go
0x1C R28 Go
0x1D R29 Go
0x1E R30 Go
0x1FR31Go
0x20 R32 Go
0x21 R33 Go
0x22R34Go
0x23 R35 Go
0x24R36Go
0x25R37Go
0x26R38Go
0x27R39Go
0x28R40Go
0x29R41Go
0x2AR42Go
0x2BR43Go
0x2CR44Go
0x2DR45Go
0x2ER46Go
0x2F R47 Go
0x30 R48 Go
0x31 R49 Go
0x32 R50 Go
0x33 R51 Go
0x34 R52 Go
0x35 R53 Go
0x36 R54 Go
0x37 R55 Go
0x38 R56 Go
0x39 R57 Go
0x3AR58Go
0x3BR59Go
0x3CR60Go
0x3D R61 Go
0x3E R62 Go
0x3F R63 Go
0x40 R64 Go
0x41 R65 Go
0x42 R66 Go
0x43 R67 Go
0x44 R68 Go
0x45R69Go
0x46R70Go
0x47R71Go
0x48R72Go
0x49R73Go
0x4AR74Go
0x4BR75Go
0x4C R76 Go
0x4D R77 Go
0x4E R78 Go
0x4F - 0x68 R79 - R104 Go
0x69 R105 Go
0x6A R106 Go
0x6B - 0x6D R107 - R109 Go
0x6ER110Go
0x6FR111Go
0x70R112Go
0x71R113Go
0x72R114Go

Complex bit access types are encoded to fit into small table cells. Table 6-19 shows the codes that are used for access types in this section.

Table 6-19 Device Access Type Codes
Access TypeCodeDescription
Read Type
RRRead
Write Type
WWWrite
Reset or Default Value
-nValue after reset