SPMU447 June   2026 CC2755P20

 

  1.   1
  2.   Read This First
    1.     About This Manual
    2.     Devices
    3.     Register, Field, and Bit Calls
    4.     Related Documentation
    5.     Trademarks
  3. 1 Architectural Overview
    1. 1.1  Target Applications
    2. 1.2  Introduction
    3. 1.3  Arm Cortex-M33
      1. 1.3.1 Processor Core
      2. 1.3.2 SysTick Timer
      3. 1.3.3 Nested Vectored Interrupt Controller
      4. 1.3.4 System Control Block (SCB)
      5. 1.3.5 TI Machine Learning Instruction Extensions
    4. 1.4  On-Chip Memory
      1. 1.4.1 SRAM
      2. 1.4.2 FLASH
      3. 1.4.3 ROM
    5. 1.5  Power Supply System
      1. 1.5.1 VDDS
      2. 1.5.2 VDDIO
      3. 1.5.3 VDDR
      4. 1.5.4 VDDD Digital Core Supply
      5. 1.5.5 DC/DC Converter
    6. 1.6  Radio
    7. 1.7  Hardware Security Module
    8. 1.8  AES 128-Bit Cryptographic Accelerator
    9. 1.9  System Timer (SYSTIM)
    10. 1.10 General Purpose Timers (LGPT)
    11. 1.11 Always-ON (AON) or Ultra-Low Leakage (ULL) Domain
      1. 1.11.1 Watchdog Timer
      2. 1.11.2 Battery and Temperature Monitor
      3. 1.11.3 Voltage Glitch Monitor (VGM)
      4. 1.11.4 Real-Time Clock (RTC)
      5. 1.11.5 Low Power Comparator
    12. 1.12 Direct Memory Access
    13. 1.13 System Control and Clock
    14. 1.14 Communication Peripherals
      1. 1.14.1 UART
      2. 1.14.2 I2C
      3. 1.14.3 SPI
      4. 1.14.4 CAN-FD
      5. 1.14.5 I2S
    15. 1.15 Programmable I/Os
    16. 1.16 Algorithm Processing Unit (APU)
    17. 1.17 Serial Wire Debug (SWD)
  4. 2 Arm® Cortex®-M33 Processor
    1. 2.1 Arm® Cortex®-M33 Processor Introduction
    2. 2.2 M33 Instantiation Parameters
    3. 2.3 Arm® Cortex®-M33 System Peripheral Details
      1. 2.3.1 Floating Point Unit (FPU)
      2. 2.3.2 Memory Protection Unit (MPU)
      3. 2.3.3 Digital Signal Processing (DSP)
      4. 2.3.4 Security Attribution Unit (SAU)
      5. 2.3.5 System Timer (SysTick)
      6. 2.3.6 Nested Vectored Interrupt Controller (NVIC)
      7. 2.3.7 System Control Block (SCB)
      8. 2.3.8 System Control Space (SCS)
    4. 2.4 CPU Sub-System Peripheral Details
      1. 2.4.1 Trace Port Interface Unit (TPIU)
      2. 2.4.2 DAP Bridge and Debug Authentication
      3. 2.4.3 Implementation Defined Attribution Unit (IDAU)
      4. 2.4.4 Custom Datapath Extension (CDE)
    5. 2.5 Programming Model
      1. 2.5.1 Modes of Operation and Execution
        1. 2.5.1.1 Security States
        2. 2.5.1.2 Operating Modes
        3. 2.5.1.3 Operating States
        4. 2.5.1.4 Privileged Access and Unprivileged User Access
      2. 2.5.2 Instruction Set Summary
      3. 2.5.3 Memory Model
        1. 2.5.3.1 Private Peripheral Bus
        2. 2.5.3.2 Unaligned Accesses
      4. 2.5.4 Processor Core Registers Summary
      5. 2.5.5 Exceptions
        1. 2.5.5.1 Exception Handling and Prioritization
    6. 2.6 TrustZone
      1. 2.6.1 Overview
      2. 2.6.2 M33 Configuration
      3. 2.6.3 Description of Elements
        1. 2.6.3.1 IDAU (Implementation Defined Attribution Unit)
          1. 2.6.3.1.1 Expected Use
        2. 2.6.3.2 Gaskets
          1. 2.6.3.2.1 Periphery Gasket
          2. 2.6.3.2.2 Controller Gasket
        3. 2.6.3.3 Memories
        4. 2.6.3.4 TCM
      4. 2.6.4 TCM Registers
    7. 2.7 Arm® Cortex®-M33 Registers
      1. 2.7.1  CPU_ROM_TABLE Registers
      2. 2.7.2  TPIU Registers
      3. 2.7.3  DCB Registers
      4. 2.7.4  DIB Registers
      5. 2.7.5  DWT Registers
      6. 2.7.6  FPB Registers
      7. 2.7.7  FPE Registers
      8. 2.7.8  ICB Registers
      9. 2.7.9  ITM Registers
      10. 2.7.10 MPU Registers
      11. 2.7.11 NVIC Registers
      12. 2.7.12 SAU Registers
      13. 2.7.13 SCB Registers
      14. 2.7.14 SYSTICK Registers
      15. 2.7.15 Clock Control
      16. 2.7.16 Protocol Descriptions
      17. 2.7.17 Reset Considerations
        1. 2.7.17.1 Hardware Reset Considerations
      18. 2.7.18 Initialization
      19. 2.7.19 Interrupt and Event Support
        1. 2.7.19.1 Connection to Event Fabric
      20. 2.7.20 Power Management
  5. 3 Memory Map
    1. 3.1 Memory Map
  6. 4 Interrupts and Events
    1. 4.1 Exception Model
      1. 4.1.1 Exception States
      2. 4.1.2 Exception Types
      3. 4.1.3 Exception Handlers
      4. 4.1.4 Vector Table
      5. 4.1.5 Exception Priorities
      6. 4.1.6 Interrupt Priority Grouping
      7. 4.1.7 Exception Entry and Return
        1. 4.1.7.1 Exception Entry
        2. 4.1.7.2 Exception Return
    2. 4.2 Fault Handling
      1. 4.2.1 Fault Types
      2. 4.2.2 Fault Escalation to HardFault
      3. 4.2.3 Fault Status Registers and Fault Address Registers
      4. 4.2.4 Lockup
    3. 4.3 Security State Switches
    4. 4.4 Event Fabric
      1. 4.4.1 Introduction
      2. 4.4.2 Overview
      3. 4.4.3 Registers
      4. 4.4.4 AON Event Fabric
        1. 4.4.4.1 AON Common Input Events List
        2. 4.4.4.2 AON Event Subscribers
        3. 4.4.4.3 Power Management Controller (PMCTL)
        4. 4.4.4.4 Real Time Clock (RTC)
        5. 4.4.4.5 AON to MCU Event Fabric
      5. 4.4.5 MCU Event Fabric
        1. 4.4.5.1 Common Input Event List
        2. 4.4.5.2 MCU Event Subscribers
          1. 4.4.5.2.1 System CPU
          2. 4.4.5.2.2 Non-Maskable Interrupt (NMI)
    5. 4.5 Digital Test Bus (DTB)
    6. 4.6 EVTSVT Registers
    7. 4.7 EVTULL Registers
  7. 5 Debug Subsystem
    1. 5.1  Introduction
    2. 5.2  Block Diagram
    3. 5.3  Overview
      1. 5.3.1 Physical Interface
      2. 5.3.2 Debug Access Ports
    4. 5.4  Debug Features
      1. 5.4.1 Processor Debug
      2. 5.4.2 Breakpoint Unit (BPU)
      3. 5.4.3 Peripheral Debug
    5. 5.5  Behavior in Low Power Modes
    6. 5.6  Restricting Debug Access
    7. 5.7  Mailbox (DSSM)
    8. 5.8  Mailbox Events
      1. 5.8.1 CPU Interrupt Event (AON_DBG_COMB)
    9. 5.9  Software Considerations
    10. 5.10 DBGSS Registers
  8. 6 Power, Reset, and Clocking
    1. 6.1 Introduction
    2. 6.2 System CPU Modes
    3. 6.3 Supply System
      1. 6.3.1 Internal DC/DC Converter and Global LDO
    4. 6.4 Power States
      1. 6.4.1 RESET
      2. 6.4.2 SHUTDOWN
      3. 6.4.3 ACTIVE
      4. 6.4.4 IDLE
      5. 6.4.5 STANDBY
      6. 6.4.6 PMCTL Registers
    5. 6.5 Digital Power Partitioning
    6. 6.6 Clocks
      1. 6.6.1 Block Diagram
      2. 6.6.2 LF clock
        1. 6.6.2.1 LFINC Measurement Mechanism
        2. 6.6.2.2 LFINC Filtering
      3. 6.6.3 HFOSC
        1. 6.6.3.1 HFOSC Control and Qualification
        2. 6.6.3.2 HFOSC Tracking Loop
      4. 6.6.4 AFOSC
        1. 6.6.4.1 AFOSC Control and Qualification
        2. 6.6.4.2 AFOSC Tracking Loop
        3. 6.6.4.3 AFOSC Ratio
      5. 6.6.5 CLKSVT
      6. 6.6.6 CLKULL
      7. 6.6.7 CKMD Registers
      8. 6.6.8 CLKCTL Registers
    7. 6.7 Resets
      1. 6.7.1 Watchdog Timer (WDT)
      2. 6.7.2 RTC Reset
      3. 6.7.3 LF Loss Detection
    8. 6.8 AON (REG3V3) Register Bank
  9. 7 Internal Memory
    1. 7.1 SRAM
      1. 7.1.1 Overview
        1. 7.1.1.1 Purpose of the Peripheral
        2. 7.1.1.2 Features
        3. 7.1.1.3 Functional Block Diagram
      2. 7.1.2 Peripheral Functional Description
        1. 7.1.2.1 Parity Error Detection
          1. 7.1.2.1.1 Parity Error Debug Register
        2. 7.1.2.2 Extension Mode
        3. 7.1.2.3 Initialization
        4. 7.1.2.4 TrustZone Watermarking
      3. 7.1.3 SRAMCTRL Registers
    2. 7.2 VIMS
      1. 7.2.1 Overview
        1. 7.2.1.1 Purpose of the Peripheral
        2. 7.2.1.2 Features
        3. 7.2.1.3 Functional Block Diagram
      2. 7.2.2 Peripheral Functional Description
        1. 7.2.2.1 Dedicated 8KB CPU Cache
        2. 7.2.2.2 Dedicated 2KB HSM Cache
        3. 7.2.2.3 Dedicated 128-Bit Line Buffer
        4. 7.2.2.4 ROM
        5. 7.2.2.5 Flash
        6. 7.2.2.6 Auxiliary Regions
        7. 7.2.2.7 Flash Partition and Protection
          1. 7.2.2.7.1 Main Region
          2. 7.2.2.7.2 Read Protection
          3. 7.2.2.7.3 Sticky Write/Erase Protection
        8. 7.2.2.8 TrustZone Watermark
        9. 7.2.2.9 Debug Access
      3. 7.2.3 VIMS Registers
    3. 7.3 FLASH
      1. 7.3.1 FLASH Registers
  10. 8 Hardware Security Module (HSM)
    1. 8.1 Introduction
    2. 8.2 Overview
    3. 8.3 One-Time-Programmable (OTP) Controller
      1. 8.3.1 High-Level Sequence to Handle OTP Requests
    4. 8.4 Mailbox and Register Access Firewall
    5. 8.5 DMA Firewall
    6. 8.6 Coprocessor
    7. 8.7 HSM FW
      1. 8.7.1 Acquiring the Latest HSM FW
      2. 8.7.2 Programming HSM FW
      3. 8.7.3 Optional Customer Signing of HSM FW
    8. 8.8 HSM Registers
    9. 8.9 HSMCRYPTO Registers
  11. 9 Device Boot and Bootloader
    1. 9.1 Device Boot and Programming
      1. 9.1.1 Boot Flow
      2. 9.1.2 Boot Status
      3. 9.1.3 Boot Protection/Locking Mechanisms
      4. 9.1.4 Debug and Active SWD Connections at Boot
        1. 9.1.4.1 Secure Debug and Persistent Debug
      5. 9.1.5 Flashless Test Mode and Tools Client Mode
        1. 9.1.5.1 Flashless Test Mode
        2. 9.1.5.2 Tools Client Mode
      6. 9.1.6 Retest Mode and Return-to-Factory Procedure
      7. 9.1.7 Disabling SWD Debug Port
    2. 9.2 Flash Programming
      1. 9.2.1 CCFG
      2. 9.2.2 CCFG Permissions/Restrictions that Affect Flash Programming
      3. 9.2.3 SACI Flash Programming Commands
      4. 9.2.4 Flash Programming Flows
        1. 9.2.4.1 Initial Programming of a New Device
        2. 9.2.4.2 Reprogramming of Previously Programmed Device
        3. 9.2.4.3 Add User Record on Already Programmed Device as Part of Commissioning Step
        4. 9.2.4.4 Incrementally Program Ancillary Data to MAIN Flash Sectors of a Previously Programmed Device
        5. 9.2.4.5 Reprogramming of Only the Main Flash Application of a Previously Programmed Device
    3. 9.3 Device Management Command Interface
      1. 9.3.1 SACI Communication Protocol
        1. 9.3.1.1 Host Side Protocol
        2. 9.3.1.2 Command Format
        3. 9.3.1.3 Response Format
        4. 9.3.1.4 Response Result Field
        5. 9.3.1.5 Command Sequence Tag
        6. 9.3.1.6 Host Side Timeout
      2. 9.3.2 SACI Commands
        1. 9.3.2.1 Miscellaneous Commands
          1. 9.3.2.1.1 SACI_CMD_MISC_NO_OPERATION
          2. 9.3.2.1.2 SACI_CMD_MISC_GET_DIE_ID
          3. 9.3.2.1.3 SACI_CMD_MISC_GET_CCFG_USER_REC
          4. 9.3.2.1.4 SACI_CMD_GET_SECBOOT_HSMFW_UPDATE_STATUS
          5. 9.3.2.1.5 SACI_CMD_HSM_GET_SYS_INFO
        2. 9.3.2.2 Debug Commands
          1. 9.3.2.2.1 SACI_CMD_DEBUG_EXIT_SACI_HALT
          2. 9.3.2.2.2 SACI_CMD_DEBUG_EXIT_SACI_SHUTDOWN
          3. 9.3.2.2.3 SACI_CMD_DEBUG_REQ_KEY_ID
          4. 9.3.2.2.4 SACI_CMD_DEBUG_REQ_CHALLENGE
          5. 9.3.2.2.5 SACI_CMD_DEBUG_SUBMIT_CHALLENGE_RESP
          6. 9.3.2.2.6 SACI_CMD_DEBUG_CLOSE_SESSION
          7. 9.3.2.2.7 SACI_CMD_BLDR_APP_RESET_DEVICE
          8. 9.3.2.2.8 SACI_CMD_BLDR_APP_EXIT_SACI_RUN
        3. 9.3.2.3 Flash Programming Commands
          1. 9.3.2.3.1  SACI_CMD_FLASH_ERASE_CHIP
          2. 9.3.2.3.2  SACI_CMD_FLASH_ERASE_MAIN_APP
          3. 9.3.2.3.3  SACI_CMD_FLASH_PROG_CCFG_SECTOR
          4. 9.3.2.3.4  SACI_CMD_FLASH_PROG_CCFG_USER_REC
          5. 9.3.2.3.5  SACI_CMD_FLASH_PROG_SCFG_SECTOR
          6. 9.3.2.3.6  SACI_CMD_FLASH_PROG_MAIN_SECTOR
          7. 9.3.2.3.7  SACI_CMD_FLASH_PROG_MAIN_PIPELINED
          8. 9.3.2.3.8  SACI_CMD_FLASH_VERIFY_MAIN_SECTORS
          9. 9.3.2.3.9  SACI_CMD_FLASH_VERIFY_CCFG_SECTOR
          10. 9.3.2.3.10 SACI_CMD_FLASH_VERIFY_SCFG_SECTOR
    4. 9.4 Bootloader Support
      1. 9.4.1 Bootloader v.s Secure Boot
    5. 9.5 ROM Serial Bootloader
      1. 9.5.1 ROM Serial Bootloader Interfaces
        1. 9.5.1.1 Packet Handling
          1. 9.5.1.1.1 Packet Acknowledge and Not-Acknowledge Bytes
        2. 9.5.1.2 Transport Layer
          1. 9.5.1.2.1 UART Transport
            1. 9.5.1.2.1.1 UART Baud Rate Automatic Detection
          2. 9.5.1.2.2 SPI Transport
      2. 9.5.2 ROM Serial Bootloader Parameters
      3. 9.5.3 ROM Serial Bootloader Commands
        1. 9.5.3.1 BLDR_CMD_PING
        2. 9.5.3.2 BLDR_CMD_GET_STATUS
        3. 9.5.3.3 BLDR_CMD_GET_PART_ID
        4. 9.5.3.4 BLDR_CMD_RESET
        5. 9.5.3.5 BLDR_CMD_CHIP_ERASE
        6. 9.5.3.6 BLDR_CMD_CRC32
        7. 9.5.3.7 BLDR_CMD_DOWNLOAD
        8. 9.5.3.8 BLDR_CMD_DOWNLOAD_CRC
        9. 9.5.3.9 BLDR_CMD_SEND_DATA
      4. 9.5.4 Bootloader Firmware Update Example
  12. 10Device Configuration
    1. 10.1 Guidelines for Securely Configuring Your Device
      1. 10.1.1 Enabling and Configuring Secure Boot
      2. 10.1.2 Configure Debug Access
      3. 10.1.3 Configure Flash Protections
      4. 10.1.4 Configure Device Permissions
      5. 10.1.5 Configure HSM FW Update Keys
      6. 10.1.6 Configure emSensor
    2. 10.2 Factory Configuration (FCFG)
    3. 10.3 Customer Configuration (CCFG)
    4. 10.4 Security Configuration (SCFG)
  13. 11Secure Boot
    1. 11.1  Secure Boot
    2. 11.2  Execution Flow
    3. 11.3  ROM API
      1. 11.3.1 HAPI (Hardware API)
      2. 11.3.2 Registers
    4. 11.4  Configuration
      1. 11.4.1 Slot Configuration
      2. 11.4.2 Policy
        1. 11.4.2.1 Authentication Method
        2. 11.4.2.2 Authentication Algorithm
        3. 11.4.2.3 Update Mode
          1. 11.4.2.3.1 Overwrite
          2. 11.4.2.3.2 XIP Revert Enabled/Disabled
      3. 11.4.3 Key Update Key Hash
      4. 11.4.4 Key Ring
      5. 11.4.5 Boot Seed
    5. 11.5  Generic Image Format
    6. 11.6  Application Update
      1. 11.6.1 Image Format
    7. 11.7  Secondary Secure Bootloader Update
      1. 11.7.1 Image Format
      2. 11.7.2 Update Pattern
    8. 11.8  Key Update
      1. 11.8.1 Image Format
    9. 11.9  Antirollback
    10. 11.10 Version Log (VLOG)
      1. 11.10.1 Record structure
    11. 11.11 Fallback
    12. 11.12 ROM Panic
  14. 12General Purpose Timers (LGPT)
    1. 12.1 Overview
    2. 12.2 Block Diagram
    3. 12.3 Functional Description
      1. 12.3.1  Prescaler
      2. 12.3.2  Counter
      3. 12.3.3  Target
      4. 12.3.4  Channel Input Logic
      5. 12.3.5  Channel Output Logic
      6. 12.3.6  Channel Actions
        1. 12.3.6.1 Period and Pulse Width Measurement
        2. 12.3.6.2 Clear on Zero, Toggle on Compare Repeatedly
        3. 12.3.6.3 Set on Zero, Toggle on Compare Repeatedly
      7. 12.3.7  Channel Capture Configuration
      8. 12.3.8  Channel Filters
        1. 12.3.8.1 Setting up the Channel Filters
      9. 12.3.9  Synchronize Multiple LGPT Timers
      10. 12.3.10 Interrupts, ADC Trigger, and DMA Request
    4. 12.4 Timer Modes
      1. 12.4.1 Quadrature Decoder
      2. 12.4.2 DMA
      3. 12.4.3 IR Generation
      4. 12.4.4 Fault and Park
      5. 12.4.5 Deadband
      6. 12.4.6 Deadband, Fault, and Park
      7. 12.4.7 Example Application: Brushless DC (BLDC) Motor
    5. 12.5 LGPT0 Registers
    6. 12.6 LGPT1 Registers
    7. 12.7 LGPT2 Registers
    8. 12.8 LGPT3 Registers
  15. 13Algorithm Processing Unit (APU)
    1. 13.1 Introduction
    2. 13.2 APU Related Collateral
    3. 13.3 Functional Description
    4. 13.4 APU Operation
    5. 13.5 Interrupts and Events
    6. 13.6 Data Representation
    7. 13.7 Data Memory
    8. 13.8 Software
    9. 13.9 APU Registers
  16. 14Voltage Glitch Monitor (VGM)
    1. 14.1 Overview
    2. 14.2 Features and Operation
  17. 15System Timer (SYSTIM)
    1. 15.1 Overview
    2. 15.2 Block Diagram
    3. 15.3 Functional Description
      1. 15.3.1 Common Channel Features
        1. 15.3.1.1 Compare Mode
        2. 15.3.1.2 Capture Mode
        3. 15.3.1.3 Additional Channel Arming Methods
      2. 15.3.2 Interrupts and Events
    4. 15.4 SYSTIM Registers
  18. 16Real Time Clock (RTC)
    1. 16.1 Introduction
    2. 16.2 Block Diagram
    3. 16.3 Interrupts and Events
      1. 16.3.1 Input Event
      2. 16.3.2 Output Event
      3. 16.3.3 Arming and Disarming Channels
    4. 16.4 CAPTURE and COMPARE Configurations
      1. 16.4.1 CHANNEL 0 - COMPARE CHANNEL
      2. 16.4.2 CHANNEL 1—CAPTURE CHANNEL
    5. 16.5 RTC Registers
  19. 17Low Power Comparator (SYS0)
    1. 17.1 Introduction
    2. 17.2 Block Diagram
    3. 17.3 Functional Description
      1. 17.3.1 Input Selection
      2. 17.3.2 Voltage Divider
      3. 17.3.3 Hysteresis
      4. 17.3.4 Wake-Up
    4. 17.4 SYS0 Registers
  20. 18Battery Monitor, Temperature Sensor, and DCDC Controller (PMUD)
    1. 18.1 Introduction
    2. 18.2 Functional Description
      1. 18.2.1 BATMON
      2. 18.2.2 DCDC
    3. 18.3 PMUD Registers
  21. 19Micro Direct Memory Access (µDMA)
    1. 19.1 Introduction
    2. 19.2 Block Diagram
    3. 19.3 Functional Description
      1. 19.3.1  Channel Assignments
      2. 19.3.2  Priority
      3. 19.3.3  Arbitration Size
      4. 19.3.4  Request Types
        1. 19.3.4.1 Single Request
        2. 19.3.4.2 Burst Request
      5. 19.3.5  Channel Configuration
      6. 19.3.6  Transfer Modes
        1. 19.3.6.1 Stop Mode
        2. 19.3.6.2 Basic Mode
        3. 19.3.6.3 Auto Mode
        4. 19.3.6.4 Ping-Pong Mode
        5. 19.3.6.5 Memory Scatter-Gather Mode
        6. 19.3.6.6 Peripheral Scatter-Gather Mode
      7. 19.3.7  Transfer Size and Increments
      8. 19.3.8  Peripheral Interface
      9. 19.3.9  Software Request
      10. 19.3.10 Interrupts and Errors
      11. 19.3.11 Initialization and Configuration
        1. 19.3.11.1 Module Initialization
        2. 19.3.11.2 Configuring a Memory-to-Memory Transfer
        3. 19.3.11.3 Configure the Channel Attributes
        4. 19.3.11.4 Configure the Channel Control Structure
        5. 19.3.11.5 Start the Transfer
        6. 19.3.11.6 Software Considerations
    4. 19.4 DMA Registers
  22. 20Advanced Encryption Standard (AES)
    1. 20.1 Introduction
      1. 20.1.1 AES Performance
    2. 20.2 Functional Description
      1. 20.2.1 Reset Considerations
      2. 20.2.2 Interrupt and Event Support
        1. 20.2.2.1 Interrupt Events and Requests
        2. 20.2.2.2 Connection to Event Fabric
      3. 20.2.3 µDMA
        1. 20.2.3.1 µDMA Example
    3. 20.3 Encryption and Decryption Configuration
      1. 20.3.1  CBC-MAC (Cipher Block Chaining-Message Authentication Code)
      2. 20.3.2  CBC (Cipher Block Chaining) Encryption
      3. 20.3.3  CBC Decryption
      4. 20.3.4  CTR (Counter) Encryption/Decryption
      5. 20.3.5  ECB (Electronic Code Book) Encryption
      6. 20.3.6  ECB Decryption
      7. 20.3.7  CFB (Cipher Feedback) Encryption
      8. 20.3.8  CFB Decryption
      9. 20.3.9  OFB (Open Feedback) Encryption
      10. 20.3.10 OFB Decryption
      11. 20.3.11 PCBC (Propagating Cipher Block Chaining) Encryption
      12. 20.3.12 PCBC Decryption
      13. 20.3.13 CTR-DRBG (Counter-Deterministic Random Bit Generator)
      14. 20.3.14 CCM
    4. 20.4 AES Registers
  23. 21Analog to Digital Converter (ADC)
    1. 21.1 Overview
    2. 21.2 Block Diagram
    3. 21.3 Functional Description
      1. 21.3.1  ADC Core
      2. 21.3.2  Voltage Reference Options
      3. 21.3.3  Resolution Modes
      4. 21.3.4  ADC Clocking
      5. 21.3.5  Power Down Behavior
      6. 21.3.6  Sampling Trigger Sources and Sampling Modes
        1. 21.3.6.1 AUTO Sampling Mode
        2. 21.3.6.2 MANUAL Sampling Mode
      7. 21.3.7  Sampling Period
      8. 21.3.8  Conversion Modes
      9. 21.3.9  ADC Data Format
      10. 21.3.10 Status Register
      11. 21.3.11 ADC Events
        1. 21.3.11.1 CPU Interrupt Event Publisher (INT_EVENT0)
        2. 21.3.11.2 Generic Event Publisher (INT_EVENT1)
        3. 21.3.11.3 DMA Trigger Event Publisher (INT_EVENT2)
        4. 21.3.11.4 Generic Event Subscriber
    4. 21.4 Advanced Features
      1. 21.4.1 Window Comparator
      2. 21.4.2 DMA & FIFO Operation
        1. 21.4.2.1 DMA/CPU Operation in Non-FIFO Mode (FIFOEN=0)
        2. 21.4.2.2 DMA/CPU Operation in FIFO Mode (FIFOEN=1)
        3. 21.4.2.3 DMA/CPU Operation Summary Matrix
      3. 21.4.3 Ad-hoc Single Conversion
    5. 21.5 ADC Registers
  24. 22I/O Controller (IOC)
    1. 22.1  Introduction
    2. 22.2  Block Diagram
    3. 22.3  I/O Mapping and Configuration
      1. 22.3.1 Basic I/O Mapping
      2. 22.3.2 Radio GPO
      3. 22.3.3 Pin Mapping
      4. 22.3.4 DTB Muxing
    4. 22.4  Edge Detection
    5. 22.5  GPIO
    6. 22.6  I/O Pins
    7. 22.7  Unused Pins
    8. 22.8  Debug Configuration
    9. 22.9  IOC Registers
    10. 22.10 GPIO Registers
  25. 23Universal Asynchronous Receiver/Transmitter (UART-LIN)
    1. 23.1 Introduction
    2. 23.2 Block Diagram
    3. 23.3 UART Functional Description
      1. 23.3.1 Transmit and Receive Logic
      2. 23.3.2 Baud Rate Generation
      3. 23.3.3 FIFO Operation
        1. 23.3.3.1 FIFO Remapping
      4. 23.3.4 Data Transmission
      5. 23.3.5 Flow Control
      6. 23.3.6 IrDA Encoding and Decoding
      7. 23.3.7 Interrupts
      8. 23.3.8 Loopback Operation
    4. 23.4 UART-LIN Specification
      1. 23.4.1 Break transmission in UART mode
      2. 23.4.2 Break reception in UART mode
      3. 23.4.3 Break/Synch transmission in LIN mode
      4. 23.4.4 Break/Synch reception in LIN mode
      5. 23.4.5 Dormant mode operation
      6. 23.4.6 Wakeup signal generation
      7. 23.4.7 Wakeup signal detection when device is in active/idle modes
      8. 23.4.8 Wakeup signal detection when device is in standby mode
    5. 23.5 Interface to µDMA
    6. 23.6 Initialization and Configuration
    7. 23.7 UART Registers
  26. 24Serial Peripheral Interface (SPI)
    1. 24.1 Overview
      1. 24.1.1 Features
      2. 24.1.2 Block Diagram
    2. 24.2 Signal Description
    3. 24.3 Functional Description
      1. 24.3.1  Clock Control
      2. 24.3.2  FIFO Operation
        1. 24.3.2.1 Transmit FIFO
        2. 24.3.2.2 Repeated Transmit Operation
        3. 24.3.2.3 Receive FIFO
        4. 24.3.2.4 FIFO Flush
      3. 24.3.3  Interrupts
      4. 24.3.4  Data Format
      5. 24.3.5  Delayed Data Sampling
      6. 24.3.6  Chip Select Control
      7. 24.3.7  Command Data Control
      8. 24.3.8  Protocol Descriptions
        1. 24.3.8.1 Motorola SPI Frame Format
        2. 24.3.8.2 Texas Instruments Synchronous Serial Frame Format
        3. 24.3.8.3 MICROWIRE Frame Format
      9. 24.3.9  CRC Configuration
      10. 24.3.10 Auto CRC Functionality
      11. 24.3.11 Auto Header Functionality
      12. 24.3.12 SPI Status
      13. 24.3.13 Debug Halt
    4. 24.4 µDMA Operation
    5. 24.5 Initialization and Configuration
    6. 24.6 SPI Registers
  27. 25Inter-Integrated Circuit (I2C)
    1. 25.1 Introduction
    2. 25.2 Block Diagram
    3. 25.3 Functional Description
      1. 25.3.1 Functional Overview
        1. 25.3.1.1 Start and Stop Conditions
        2. 25.3.1.2 Data Format with 7-Bit Address
        3. 25.3.1.3 Data Validity
        4. 25.3.1.4 Acknowledge
        5. 25.3.1.5 Arbitration
      2. 25.3.2 Available Speed Modes
      3. 25.3.3 Interrupts
        1. 25.3.3.1 I2C Controller Interrupts
        2. 25.3.3.2 I2C Target Interrupts
      4. 25.3.4 Loopback Operation
      5. 25.3.5 Command Sequence Flowcharts
        1. 25.3.5.1 I2C Controller Command Sequences
        2. 25.3.5.2 I2C Target Command Sequences
    4. 25.4 Initialization and Configuration
    5. 25.5 I2C Registers
  28. 26Inter-IC Sound (I2S)
    1. 26.1  Introduction
    2. 26.2  Block Diagram
    3. 26.3  Clock Architecture
    4. 26.4  Signal Descriptions
    5. 26.5  Functional Description
      1. 26.5.1 Pin Configuration
      2. 26.5.2 Serial Format Configuration
      3. 26.5.3 I2S Format Schematic
        1. 26.5.3.1 Register Configuration
      4. 26.5.4 Left-Justified (LJF)
        1. 26.5.4.1 Register Configuration
      5. 26.5.5 Right-Justified (RJF)
        1. 26.5.5.1 Register Configuration
      6. 26.5.6 DSP
        1. 26.5.6.1 Register Configuration
      7. 26.5.7 Clock Configuration
    6. 26.6  Memory Interface
      1. 26.6.1 Sample Word Length
      2. 26.6.2 Padding Mechanism
      3. 26.6.3 Channel Mapping
      4. 26.6.4 Sample Storage in Memory
      5. 26.6.5 DMA Operation
        1. 26.6.5.1 Start-Up
        2. 26.6.5.2 Operation
        3. 26.6.5.3 Shutdown
    7. 26.7  Samplestamp Generator
      1. 26.7.1 Samplestamp Counters
      2. 26.7.2 Start-Up Triggers
      3. 26.7.3 Samplestamp Capture
      4. 26.7.4 Achieving Constant Audio Latency
    8. 26.8  Error Detection
    9. 26.9  Usage
      1. 26.9.1 Start-Up Sequence
      2. 26.9.2 Shutdown Sequence
    10. 26.10 I2S Configuration Guideline
    11. 26.11 I2S Registers
  29. 27CAN-FD
    1. 27.1 Introduction
    2. 27.2 Functions
    3. 27.3 MCAN Subsystem
    4. 27.4 MCAN Functional Description
      1. 27.4.1 Operating Modes
        1. 27.4.1.1 Software Initialization
        2. 27.4.1.2 Normal Operation
        3. 27.4.1.3 CAN FD Operation
        4. 27.4.1.4 Transmitter Delay Compensation
          1. 27.4.1.4.1 Description
          2. 27.4.1.4.2 Transmitter Delay Compensation Measurement
        5. 27.4.1.5 Restricted Operation Mode
        6. 27.4.1.6 Bus Monitoring Mode
        7. 27.4.1.7 Disabled Automatic Retransmission
          1. 27.4.1.7.1 Frame Transmission in DAR Mode
        8. 27.4.1.8 Power Down (Sleep Mode)
          1. 27.4.1.8.1 MCAN Clock Stop and Wake Operations
          2. 27.4.1.8.2 MCAN Debug Suspend Operation
        9. 27.4.1.9 Test Modes
          1. 27.4.1.9.1 External Loop Back Mode
          2. 27.4.1.9.2 Internal Loop Back Mode
      2. 27.4.2 Timestamp Generation
        1. 27.4.2.1 External Timestamp Counter
        2. 27.4.2.2 Block Diagram
      3. 27.4.3 Timeout Counter
      4. 27.4.4 Rx Handling
        1. 27.4.4.1 Acceptance Filtering
          1. 27.4.4.1.1 Range Filter
          2. 27.4.4.1.2 Filter for specific IDs
          3. 27.4.4.1.3 Classic Bit Mask Filter
          4. 27.4.4.1.4 Standard Message ID Filtering
          5. 27.4.4.1.5 Extended Message ID Filtering
        2. 27.4.4.2 Rx FIFOs
          1. 27.4.4.2.1 Rx FIFO Blocking Mode
          2. 27.4.4.2.2 Rx FIFO Overwrite Mode
        3. 27.4.4.3 Dedicated Rx Buffers
          1. 27.4.4.3.1 Rx Buffer Handling
        4. 27.4.4.4 Debug on CAN Support
          1. 27.4.4.4.1 Filtering for Debug Messages
          2. 27.4.4.4.2 Debug Message Handling
      5. 27.4.5 Tx Handling
        1. 27.4.5.1 Transmit Pause
        2. 27.4.5.2 Dedicated Tx Buffers
        3. 27.4.5.3 Tx FIFO
        4. 27.4.5.4 Tx Queue
        5. 27.4.5.5 Mixed Dedicated Tx Buffers / Tx FIFO
        6. 27.4.5.6 Mixed Dedicated Tx Buffers / Tx Queue
        7. 27.4.5.7 Transmit Cancellation
        8. 27.4.5.8 Tx Event Handling
      6. 27.4.6 FIFO Acknowledge Handling
      7. 27.4.7 MCAN Message RAM
        1. 27.4.7.1 Message RAM Configuration
        2. 27.4.7.2 Rx Buffer and FIFO Element
        3. 27.4.7.3 Tx Buffer Element
        4. 27.4.7.4 Tx Event FIFO Element
        5. 27.4.7.5 Standard Message ID Filter Element
        6. 27.4.7.6 Extended Message ID Filter Element
      8. 27.4.8 Interrupt Requests
    5. 27.5 CC27xx MCAN Wrapper
    6. 27.6 MCAN Clock Enable
    7. 27.7 Additional Notes
    8. 27.8 CANFD Registers
  30. 28Radio
    1. 28.1  Introduction
    2. 28.2  Block Diagram
    3. 28.3  Overview
      1. 28.3.1 Radio Sub-Domains
      2. 28.3.2 Radio RAMs
      3. 28.3.3 Doorbell (DBELL)
        1. 28.3.3.1 Interrupts
        2. 28.3.3.2 GPIO Control
        3. 28.3.3.3 SYSTIM Interface
    4. 28.4  Radio Usage Model
      1. 28.4.1 CRC and Whitening
    5. 28.5  LRFDDBELL Registers
    6. 28.6  LRFDMDM32 Registers
    7. 28.7  LRFDPBE Registers
    8. 28.8  LRFDPBE32 Registers
    9. 28.9  LRFDRFE Registers
    10. 28.10 LRFDRFE32 Registers
    11. 28.11 LRFDRXF Registers
    12. 28.12 LRFDS2R Registers
    13. 28.13 LRFDTRC Registers
    14. 28.14 LRFDTXF Registers
  31. 29Revision History

2.7.9 ITM Registers

Table 2-147 lists the memguaranteeory-mapped registers for the ITM registers. All register offset addresses not listed in Table 2-147 should be considered as reserved locations and the register contents should not be modified.

Table 2-147 ITM Registers
OffsetAcronymRegister NameSection
0hITM_STIM0Provides the interface for generating Instrumentation packetsSection 2.7.9.1
4hITM_STIM1Provides the interface for generating Instrumentation packetsSection 2.7.9.2
8hITM_STIM2Provides the interface for generating Instrumentation packetsSection 2.7.9.3
ChITM_STIM3Provides the interface for generating Instrumentation packetsSection 2.7.9.4
10hITM_STIM4Provides the interface for generating Instrumentation packetsSection 2.7.9.5
14hITM_STIM5Provides the interface for generating Instrumentation packetsSection 2.7.9.6
18hITM_STIM6Provides the interface for generating Instrumentation packetsSection 2.7.9.7
1ChITM_STIM7Provides the interface for generating Instrumentation packetsSection 2.7.9.8
20hITM_STIM8Provides the interface for generating Instrumentation packetsSection 2.7.9.9
24hITM_STIM9Provides the interface for generating Instrumentation packetsSection 2.7.9.10
28hITM_STIM10Provides the interface for generating Instrumentation packetsSection 2.7.9.11
2ChITM_STIM11Provides the interface for generating Instrumentation packetsSection 2.7.9.12
30hITM_STIM12Provides the interface for generating Instrumentation packetsSection 2.7.9.13
34hITM_STIM13Provides the interface for generating Instrumentation packetsSection 2.7.9.14
38hITM_STIM14Provides the interface for generating Instrumentation packetsSection 2.7.9.15
3ChITM_STIM15Provides the interface for generating Instrumentation packetsSection 2.7.9.16
40hITM_STIM16Provides the interface for generating Instrumentation packetsSection 2.7.9.17
44hITM_STIM17Provides the interface for generating Instrumentation packetsSection 2.7.9.18
48hITM_STIM18Provides the interface for generating Instrumentation packetsSection 2.7.9.19
4ChITM_STIM19Provides the interface for generating Instrumentation packetsSection 2.7.9.20
50hITM_STIM20Provides the interface for generating Instrumentation packetsSection 2.7.9.21
54hITM_STIM21Provides the interface for generating Instrumentation packetsSection 2.7.9.22
58hITM_STIM22Provides the interface for generating Instrumentation packetsSection 2.7.9.23
5ChITM_STIM23Provides the interface for generating Instrumentation packetsSection 2.7.9.24
60hITM_STIM24Provides the interface for generating Instrumentation packetsSection 2.7.9.25
64hITM_STIM25Provides the interface for generating Instrumentation packetsSection 2.7.9.26
68hITM_STIM26Provides the interface for generating Instrumentation packetsSection 2.7.9.27
6ChITM_STIM27Provides the interface for generating Instrumentation packetsSection 2.7.9.28
70hITM_STIM28Provides the interface for generating Instrumentation packetsSection 2.7.9.29
74hITM_STIM29Provides the interface for generating Instrumentation packetsSection 2.7.9.30
78hITM_STIM30Provides the interface for generating Instrumentation packetsSection 2.7.9.31
7ChITM_STIM31Provides the interface for generating Instrumentation packetsSection 2.7.9.32
80hITM_STIM32Provides the interface for generating Instrumentation packetsSection 2.7.9.33
84hITM_STIM33Provides the interface for generating Instrumentation packetsSection 2.7.9.34
88hITM_STIM34Provides the interface for generating Instrumentation packetsSection 2.7.9.35
8ChITM_STIM35Provides the interface for generating Instrumentation packetsSection 2.7.9.36
90hITM_STIM36Provides the interface for generating Instrumentation packetsSection 2.7.9.37
94hITM_STIM37Provides the interface for generating Instrumentation packetsSection 2.7.9.38
98hITM_STIM38Provides the interface for generating Instrumentation packetsSection 2.7.9.39
9ChITM_STIM39Provides the interface for generating Instrumentation packetsSection 2.7.9.40
A0hITM_STIM40Provides the interface for generating Instrumentation packetsSection 2.7.9.41
A4hITM_STIM41Provides the interface for generating Instrumentation packetsSection 2.7.9.42
A8hITM_STIM42Provides the interface for generating Instrumentation packetsSection 2.7.9.43
AChITM_STIM43Provides the interface for generating Instrumentation packetsSection 2.7.9.44
B0hITM_STIM44Provides the interface for generating Instrumentation packetsSection 2.7.9.45
B4hITM_STIM45Provides the interface for generating Instrumentation packetsSection 2.7.9.46
B8hITM_STIM46Provides the interface for generating Instrumentation packetsSection 2.7.9.47
BChITM_STIM47Provides the interface for generating Instrumentation packetsSection 2.7.9.48
C0hITM_STIM48Provides the interface for generating Instrumentation packetsSection 2.7.9.49
C4hITM_STIM49Provides the interface for generating Instrumentation packetsSection 2.7.9.50
C8hITM_STIM50Provides the interface for generating Instrumentation packetsSection 2.7.9.51
CChITM_STIM51Provides the interface for generating Instrumentation packetsSection 2.7.9.52
D0hITM_STIM52Provides the interface for generating Instrumentation packetsSection 2.7.9.53
D4hITM_STIM53Provides the interface for generating Instrumentation packetsSection 2.7.9.54
D8hITM_STIM54Provides the interface for generating Instrumentation packetsSection 2.7.9.55
DChITM_STIM55Provides the interface for generating Instrumentation packetsSection 2.7.9.56
E0hITM_STIM56Provides the interface for generating Instrumentation packetsSection 2.7.9.57
E4hITM_STIM57Provides the interface for generating Instrumentation packetsSection 2.7.9.58
E8hITM_STIM58Provides the interface for generating Instrumentation packetsSection 2.7.9.59
EChITM_STIM59Provides the interface for generating Instrumentation packetsSection 2.7.9.60
F0hITM_STIM60Provides the interface for generating Instrumentation packetsSection 2.7.9.61
F4hITM_STIM61Provides the interface for generating Instrumentation packetsSection 2.7.9.62
F8hITM_STIM62Provides the interface for generating Instrumentation packetsSection 2.7.9.63
FChITM_STIM63Provides the interface for generating Instrumentation packetsSection 2.7.9.64
100hITM_STIM64Provides the interface for generating Instrumentation packetsSection 2.7.9.65
104hITM_STIM65Provides the interface for generating Instrumentation packetsSection 2.7.9.66
108hITM_STIM66Provides the interface for generating Instrumentation packetsSection 2.7.9.67
10ChITM_STIM67Provides the interface for generating Instrumentation packetsSection 2.7.9.68
110hITM_STIM68Provides the interface for generating Instrumentation packetsSection 2.7.9.69
114hITM_STIM69Provides the interface for generating Instrumentation packetsSection 2.7.9.70
118hITM_STIM70Provides the interface for generating Instrumentation packetsSection 2.7.9.71
11ChITM_STIM71Provides the interface for generating Instrumentation packetsSection 2.7.9.72
120hITM_STIM72Provides the interface for generating Instrumentation packetsSection 2.7.9.73
124hITM_STIM73Provides the interface for generating Instrumentation packetsSection 2.7.9.74
128hITM_STIM74Provides the interface for generating Instrumentation packetsSection 2.7.9.75
12ChITM_STIM75Provides the interface for generating Instrumentation packetsSection 2.7.9.76
130hITM_STIM76Provides the interface for generating Instrumentation packetsSection 2.7.9.77
134hITM_STIM77Provides the interface for generating Instrumentation packetsSection 2.7.9.78
138hITM_STIM78Provides the interface for generating Instrumentation packetsSection 2.7.9.79
13ChITM_STIM79Provides the interface for generating Instrumentation packetsSection 2.7.9.80
140hITM_STIM80Provides the interface for generating Instrumentation packetsSection 2.7.9.81
144hITM_STIM81Provides the interface for generating Instrumentation packetsSection 2.7.9.82
148hITM_STIM82Provides the interface for generating Instrumentation packetsSection 2.7.9.83
14ChITM_STIM83Provides the interface for generating Instrumentation packetsSection 2.7.9.84
150hITM_STIM84Provides the interface for generating Instrumentation packetsSection 2.7.9.85
154hITM_STIM85Provides the interface for generating Instrumentation packetsSection 2.7.9.86
158hITM_STIM86Provides the interface for generating Instrumentation packetsSection 2.7.9.87
15ChITM_STIM87Provides the interface for generating Instrumentation packetsSection 2.7.9.88
160hITM_STIM88Provides the interface for generating Instrumentation packetsSection 2.7.9.89
164hITM_STIM89Provides the interface for generating Instrumentation packetsSection 2.7.9.90
168hITM_STIM90Provides the interface for generating Instrumentation packetsSection 2.7.9.91
16ChITM_STIM91Provides the interface for generating Instrumentation packetsSection 2.7.9.92
170hITM_STIM92Provides the interface for generating Instrumentation packetsSection 2.7.9.93
174hITM_STIM93Provides the interface for generating Instrumentation packetsSection 2.7.9.94
178hITM_STIM94Provides the interface for generating Instrumentation packetsSection 2.7.9.95
17ChITM_STIM95Provides the interface for generating Instrumentation packetsSection 2.7.9.96
180hITM_STIM96Provides the interface for generating Instrumentation packetsSection 2.7.9.97
184hITM_STIM97Provides the interface for generating Instrumentation packetsSection 2.7.9.98
188hITM_STIM98Provides the interface for generating Instrumentation packetsSection 2.7.9.99
18ChITM_STIM99Provides the interface for generating Instrumentation packetsSection 2.7.9.100
190hITM_STIM100Provides the interface for generating Instrumentation packetsSection 2.7.9.101
194hITM_STIM101Provides the interface for generating Instrumentation packetsSection 2.7.9.102
198hITM_STIM102Provides the interface for generating Instrumentation packetsSection 2.7.9.103
19ChITM_STIM103Provides the interface for generating Instrumentation packetsSection 2.7.9.104
1A0hITM_STIM104Provides the interface for generating Instrumentation packetsSection 2.7.9.105
1A4hITM_STIM105Provides the interface for generating Instrumentation packetsSection 2.7.9.106
1A8hITM_STIM106Provides the interface for generating Instrumentation packetsSection 2.7.9.107
1AChITM_STIM107Provides the interface for generating Instrumentation packetsSection 2.7.9.108
1B0hITM_STIM108Provides the interface for generating Instrumentation packetsSection 2.7.9.109
1B4hITM_STIM109Provides the interface for generating Instrumentation packetsSection 2.7.9.110
1B8hITM_STIM110Provides the interface for generating Instrumentation packetsSection 2.7.9.111
1BChITM_STIM111Provides the interface for generating Instrumentation packetsSection 2.7.9.112
1C0hITM_STIM112Provides the interface for generating Instrumentation packetsSection 2.7.9.113
1C4hITM_STIM113Provides the interface for generating Instrumentation packetsSection 2.7.9.114
1C8hITM_STIM114Provides the interface for generating Instrumentation packetsSection 2.7.9.115
1CChITM_STIM115Provides the interface for generating Instrumentation packetsSection 2.7.9.116
1D0hITM_STIM116Provides the interface for generating Instrumentation packetsSection 2.7.9.117
1D4hITM_STIM117Provides the interface for generating Instrumentation packetsSection 2.7.9.118
1D8hITM_STIM118Provides the interface for generating Instrumentation packetsSection 2.7.9.119
1DChITM_STIM119Provides the interface for generating Instrumentation packetsSection 2.7.9.120
1E0hITM_STIM120Provides the interface for generating Instrumentation packetsSection 2.7.9.121
1E4hITM_STIM121Provides the interface for generating Instrumentation packetsSection 2.7.9.122
1E8hITM_STIM122Provides the interface for generating Instrumentation packetsSection 2.7.9.123
1EChITM_STIM123Provides the interface for generating Instrumentation packetsSection 2.7.9.124
1F0hITM_STIM124Provides the interface for generating Instrumentation packetsSection 2.7.9.125
1F4hITM_STIM125Provides the interface for generating Instrumentation packetsSection 2.7.9.126
1F8hITM_STIM126Provides the interface for generating Instrumentation packetsSection 2.7.9.127
1FChITM_STIM127Provides the interface for generating Instrumentation packetsSection 2.7.9.128
200hITM_STIM128Provides the interface for generating Instrumentation packetsSection 2.7.9.129
204hITM_STIM129Provides the interface for generating Instrumentation packetsSection 2.7.9.130
208hITM_STIM130Provides the interface for generating Instrumentation packetsSection 2.7.9.131
20ChITM_STIM131Provides the interface for generating Instrumentation packetsSection 2.7.9.132
210hITM_STIM132Provides the interface for generating Instrumentation packetsSection 2.7.9.133
214hITM_STIM133Provides the interface for generating Instrumentation packetsSection 2.7.9.134
218hITM_STIM134Provides the interface for generating Instrumentation packetsSection 2.7.9.135
21ChITM_STIM135Provides the interface for generating Instrumentation packetsSection 2.7.9.136
220hITM_STIM136Provides the interface for generating Instrumentation packetsSection 2.7.9.137
224hITM_STIM137Provides the interface for generating Instrumentation packetsSection 2.7.9.138
228hITM_STIM138Provides the interface for generating Instrumentation packetsSection 2.7.9.139
22ChITM_STIM139Provides the interface for generating Instrumentation packetsSection 2.7.9.140
230hITM_STIM140Provides the interface for generating Instrumentation packetsSection 2.7.9.141
234hITM_STIM141Provides the interface for generating Instrumentation packetsSection 2.7.9.142
238hITM_STIM142Provides the interface for generating Instrumentation packetsSection 2.7.9.143
23ChITM_STIM143Provides the interface for generating Instrumentation packetsSection 2.7.9.144
240hITM_STIM144Provides the interface for generating Instrumentation packetsSection 2.7.9.145
244hITM_STIM145Provides the interface for generating Instrumentation packetsSection 2.7.9.146
248hITM_STIM146Provides the interface for generating Instrumentation packetsSection 2.7.9.147
24ChITM_STIM147Provides the interface for generating Instrumentation packetsSection 2.7.9.148
250hITM_STIM148Provides the interface for generating Instrumentation packetsSection 2.7.9.149
254hITM_STIM149Provides the interface for generating Instrumentation packetsSection 2.7.9.150
258hITM_STIM150Provides the interface for generating Instrumentation packetsSection 2.7.9.151
25ChITM_STIM151Provides the interface for generating Instrumentation packetsSection 2.7.9.152
260hITM_STIM152Provides the interface for generating Instrumentation packetsSection 2.7.9.153
264hITM_STIM153Provides the interface for generating Instrumentation packetsSection 2.7.9.154
268hITM_STIM154Provides the interface for generating Instrumentation packetsSection 2.7.9.155
26ChITM_STIM155Provides the interface for generating Instrumentation packetsSection 2.7.9.156
270hITM_STIM156Provides the interface for generating Instrumentation packetsSection 2.7.9.157
274hITM_STIM157Provides the interface for generating Instrumentation packetsSection 2.7.9.158
278hITM_STIM158Provides the interface for generating Instrumentation packetsSection 2.7.9.159
27ChITM_STIM159Provides the interface for generating Instrumentation packetsSection 2.7.9.160
280hITM_STIM160Provides the interface for generating Instrumentation packetsSection 2.7.9.161
284hITM_STIM161Provides the interface for generating Instrumentation packetsSection 2.7.9.162
288hITM_STIM162Provides the interface for generating Instrumentation packetsSection 2.7.9.163
28ChITM_STIM163Provides the interface for generating Instrumentation packetsSection 2.7.9.164
290hITM_STIM164Provides the interface for generating Instrumentation packetsSection 2.7.9.165
294hITM_STIM165Provides the interface for generating Instrumentation packetsSection 2.7.9.166
298hITM_STIM166Provides the interface for generating Instrumentation packetsSection 2.7.9.167
29ChITM_STIM167Provides the interface for generating Instrumentation packetsSection 2.7.9.168
2A0hITM_STIM168Provides the interface for generating Instrumentation packetsSection 2.7.9.169
2A4hITM_STIM169Provides the interface for generating Instrumentation packetsSection 2.7.9.170
2A8hITM_STIM170Provides the interface for generating Instrumentation packetsSection 2.7.9.171
2AChITM_STIM171Provides the interface for generating Instrumentation packetsSection 2.7.9.172
2B0hITM_STIM172Provides the interface for generating Instrumentation packetsSection 2.7.9.173
2B4hITM_STIM173Provides the interface for generating Instrumentation packetsSection 2.7.9.174
2B8hITM_STIM174Provides the interface for generating Instrumentation packetsSection 2.7.9.175
2BChITM_STIM175Provides the interface for generating Instrumentation packetsSection 2.7.9.176
2C0hITM_STIM176Provides the interface for generating Instrumentation packetsSection 2.7.9.177
2C4hITM_STIM177Provides the interface for generating Instrumentation packetsSection 2.7.9.178
2C8hITM_STIM178Provides the interface for generating Instrumentation packetsSection 2.7.9.179
2CChITM_STIM179Provides the interface for generating Instrumentation packetsSection 2.7.9.180
2D0hITM_STIM180Provides the interface for generating Instrumentation packetsSection 2.7.9.181
2D4hITM_STIM181Provides the interface for generating Instrumentation packetsSection 2.7.9.182
2D8hITM_STIM182Provides the interface for generating Instrumentation packetsSection 2.7.9.183
2DChITM_STIM183Provides the interface for generating Instrumentation packetsSection 2.7.9.184
2E0hITM_STIM184Provides the interface for generating Instrumentation packetsSection 2.7.9.185
2E4hITM_STIM185Provides the interface for generating Instrumentation packetsSection 2.7.9.186
2E8hITM_STIM186Provides the interface for generating Instrumentation packetsSection 2.7.9.187
2EChITM_STIM187Provides the interface for generating Instrumentation packetsSection 2.7.9.188
2F0hITM_STIM188Provides the interface for generating Instrumentation packetsSection 2.7.9.189
2F4hITM_STIM189Provides the interface for generating Instrumentation packetsSection 2.7.9.190
2F8hITM_STIM190Provides the interface for generating Instrumentation packetsSection 2.7.9.191
2FChITM_STIM191Provides the interface for generating Instrumentation packetsSection 2.7.9.192
300hITM_STIM192Provides the interface for generating Instrumentation packetsSection 2.7.9.193
304hITM_STIM193Provides the interface for generating Instrumentation packetsSection 2.7.9.194
308hITM_STIM194Provides the interface for generating Instrumentation packetsSection 2.7.9.195
30ChITM_STIM195Provides the interface for generating Instrumentation packetsSection 2.7.9.196
310hITM_STIM196Provides the interface for generating Instrumentation packetsSection 2.7.9.197
314hITM_STIM197Provides the interface for generating Instrumentation packetsSection 2.7.9.198
318hITM_STIM198Provides the interface for generating Instrumentation packetsSection 2.7.9.199
31ChITM_STIM199Provides the interface for generating Instrumentation packetsSection 2.7.9.200
320hITM_STIM200Provides the interface for generating Instrumentation packetsSection 2.7.9.201
324hITM_STIM201Provides the interface for generating Instrumentation packetsSection 2.7.9.202
328hITM_STIM202Provides the interface for generating Instrumentation packetsSection 2.7.9.203
32ChITM_STIM203Provides the interface for generating Instrumentation packetsSection 2.7.9.204
330hITM_STIM204Provides the interface for generating Instrumentation packetsSection 2.7.9.205
334hITM_STIM205Provides the interface for generating Instrumentation packetsSection 2.7.9.206
338hITM_STIM206Provides the interface for generating Instrumentation packetsSection 2.7.9.207
33ChITM_STIM207Provides the interface for generating Instrumentation packetsSection 2.7.9.208
340hITM_STIM208Provides the interface for generating Instrumentation packetsSection 2.7.9.209
344hITM_STIM209Provides the interface for generating Instrumentation packetsSection 2.7.9.210
348hITM_STIM210Provides the interface for generating Instrumentation packetsSection 2.7.9.211
34ChITM_STIM211Provides the interface for generating Instrumentation packetsSection 2.7.9.212
350hITM_STIM212Provides the interface for generating Instrumentation packetsSection 2.7.9.213
354hITM_STIM213Provides the interface for generating Instrumentation packetsSection 2.7.9.214
358hITM_STIM214Provides the interface for generating Instrumentation packetsSection 2.7.9.215
35ChITM_STIM215Provides the interface for generating Instrumentation packetsSection 2.7.9.216
360hITM_STIM216Provides the interface for generating Instrumentation packetsSection 2.7.9.217
364hITM_STIM217Provides the interface for generating Instrumentation packetsSection 2.7.9.218
368hITM_STIM218Provides the interface for generating Instrumentation packetsSection 2.7.9.219
36ChITM_STIM219Provides the interface for generating Instrumentation packetsSection 2.7.9.220
370hITM_STIM220Provides the interface for generating Instrumentation packetsSection 2.7.9.221
374hITM_STIM221Provides the interface for generating Instrumentation packetsSection 2.7.9.222
378hITM_STIM222Provides the interface for generating Instrumentation packetsSection 2.7.9.223
37ChITM_STIM223Provides the interface for generating Instrumentation packetsSection 2.7.9.224
380hITM_STIM224Provides the interface for generating Instrumentation packetsSection 2.7.9.225
384hITM_STIM225Provides the interface for generating Instrumentation packetsSection 2.7.9.226
388hITM_STIM226Provides the interface for generating Instrumentation packetsSection 2.7.9.227
38ChITM_STIM227Provides the interface for generating Instrumentation packetsSection 2.7.9.228
390hITM_STIM228Provides the interface for generating Instrumentation packetsSection 2.7.9.229
394hITM_STIM229Provides the interface for generating Instrumentation packetsSection 2.7.9.230
398hITM_STIM230Provides the interface for generating Instrumentation packetsSection 2.7.9.231
39ChITM_STIM231Provides the interface for generating Instrumentation packetsSection 2.7.9.232
3A0hITM_STIM232Provides the interface for generating Instrumentation packetsSection 2.7.9.233
3A4hITM_STIM233Provides the interface for generating Instrumentation packetsSection 2.7.9.234
3A8hITM_STIM234Provides the interface for generating Instrumentation packetsSection 2.7.9.235
3AChITM_STIM235Provides the interface for generating Instrumentation packetsSection 2.7.9.236
3B0hITM_STIM236Provides the interface for generating Instrumentation packetsSection 2.7.9.237
3B4hITM_STIM237Provides the interface for generating Instrumentation packetsSection 2.7.9.238
3B8hITM_STIM238Provides the interface for generating Instrumentation packetsSection 2.7.9.239
3BChITM_STIM239Provides the interface for generating Instrumentation packetsSection 2.7.9.240
3C0hITM_STIM240Provides the interface for generating Instrumentation packetsSection 2.7.9.241
3C4hITM_STIM241Provides the interface for generating Instrumentation packetsSection 2.7.9.242
3C8hITM_STIM242Provides the interface for generating Instrumentation packetsSection 2.7.9.243
3CChITM_STIM243Provides the interface for generating Instrumentation packetsSection 2.7.9.244
3D0hITM_STIM244Provides the interface for generating Instrumentation packetsSection 2.7.9.245
3D4hITM_STIM245Provides the interface for generating Instrumentation packetsSection 2.7.9.246
3D8hITM_STIM246Provides the interface for generating Instrumentation packetsSection 2.7.9.247
3DChITM_STIM247Provides the interface for generating Instrumentation packetsSection 2.7.9.248
3E0hITM_STIM248Provides the interface for generating Instrumentation packetsSection 2.7.9.249
3E4hITM_STIM249Provides the interface for generating Instrumentation packetsSection 2.7.9.250
3E8hITM_STIM250Provides the interface for generating Instrumentation packetsSection 2.7.9.251
3EChITM_STIM251Provides the interface for generating Instrumentation packetsSection 2.7.9.252
3F0hITM_STIM252Provides the interface for generating Instrumentation packetsSection 2.7.9.253
3F4hITM_STIM253Provides the interface for generating Instrumentation packetsSection 2.7.9.254
3F8hITM_STIM254Provides the interface for generating Instrumentation packetsSection 2.7.9.255
3FChITM_STIM255Provides the interface for generating Instrumentation packetsSection 2.7.9.256
E00hITM_TER0Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.257
E04hITM_TER1Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.258
E08hITM_TER2Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.259
E0ChITM_TER3Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.260
E10hITM_TER4Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.261
E14hITM_TER5Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.262
E18hITM_TER6Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.263
E1ChITM_TER7Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.264
E40hITM_TPRControls which stimulus ports can be accessed by unprivileged codeSection 2.7.9.265
E80hITM_TCRConfigures and controls transfers through the ITM interfaceSection 2.7.9.266
EF0hINT_ATREADYIntegration Mode: Read ATB ReadySection 2.7.9.267
EF8hINT_ATVALIDIntegration Mode: Write ATB ValidSection 2.7.9.268
F00hITM_ITCTRLIntegration Mode Control RegisterSection 2.7.9.269
FBChITM_DEVARCHProvides CoreSight discovery information for the ITMSection 2.7.9.270
FCChITM_DEVTYPEProvides CoreSight discovery information for the ITMSection 2.7.9.271
FD0hITM_PIDR4Provides CoreSight discovery information for the ITMSection 2.7.9.272
FD4hITM_PIDR5Provides CoreSight discovery information for the ITMSection 2.7.9.273
FD8hITM_PIDR6Provides CoreSight discovery information for the ITMSection 2.7.9.274
FDChITM_PIDR7Provides CoreSight discovery information for the ITMSection 2.7.9.275
FE0hITM_PIDR0Provides CoreSight discovery information for the ITMSection 2.7.9.276
FE4hITM_PIDR1Provides CoreSight discovery information for the ITMSection 2.7.9.277
FE8hITM_PIDR2Provides CoreSight discovery information for the ITMSection 2.7.9.278
FEChITM_PIDR3Provides CoreSight discovery information for the ITMSection 2.7.9.279
FF0hITM_CIDR0Provides CoreSight discovery information for the ITMSection 2.7.9.280
FF4hITM_CIDR1Provides CoreSight discovery information for the ITMSection 2.7.9.281
FF8hITM_CIDR2Provides CoreSight discovery information for the ITMSection 2.7.9.282
FFChITM_CIDR3Provides CoreSight discovery information for the ITMSection 2.7.9.283

Complex bit access types are encoded to fit into small table cells. Table 2-148 shows the codes that are used for access types in this section.

Table 2-148 ITM Access Type Codes
Access TypeCodeDescription
Read Type
RRRead
Write Type
WWWrite
Reset or Default Value
-nValue after reset or the default value

2.7.9.1 ITM_STIM0 Register (Offset = 0h) [Reset = 00000000h]

ITM_STIM0 is shown in Table 2-149.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-149 ITM_STIM0 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.2 ITM_STIM1 Register (Offset = 4h) [Reset = 00000000h]

ITM_STIM1 is shown in Table 2-150.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-150 ITM_STIM1 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.3 ITM_STIM2 Register (Offset = 8h) [Reset = 00000000h]

ITM_STIM2 is shown in Table 2-151.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-151 ITM_STIM2 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.4 ITM_STIM3 Register (Offset = Ch) [Reset = 00000000h]

ITM_STIM3 is shown in Table 2-152.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-152 ITM_STIM3 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.5 ITM_STIM4 Register (Offset = 10h) [Reset = 00000000h]

ITM_STIM4 is shown in Table 2-153.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-153 ITM_STIM4 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.6 ITM_STIM5 Register (Offset = 14h) [Reset = 00000000h]

ITM_STIM5 is shown in Table 2-154.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-154 ITM_STIM5 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.7 ITM_STIM6 Register (Offset = 18h) [Reset = 00000000h]

ITM_STIM6 is shown in Table 2-155.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-155 ITM_STIM6 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.8 ITM_STIM7 Register (Offset = 1Ch) [Reset = 00000000h]

ITM_STIM7 is shown in Table 2-156.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-156 ITM_STIM7 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.9 ITM_STIM8 Register (Offset = 20h) [Reset = 00000000h]

ITM_STIM8 is shown in Table 2-157.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-157 ITM_STIM8 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.10 ITM_STIM9 Register (Offset = 24h) [Reset = 00000000h]

ITM_STIM9 is shown in Table 2-158.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-158 ITM_STIM9 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.11 ITM_STIM10 Register (Offset = 28h) [Reset = 00000000h]

ITM_STIM10 is shown in Table 2-159.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-159 ITM_STIM10 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.12 ITM_STIM11 Register (Offset = 2Ch) [Reset = 00000000h]

ITM_STIM11 is shown in Table 2-160.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-160 ITM_STIM11 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.13 ITM_STIM12 Register (Offset = 30h) [Reset = 00000000h]

ITM_STIM12 is shown in Table 2-161.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-161 ITM_STIM12 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.14 ITM_STIM13 Register (Offset = 34h) [Reset = 00000000h]

ITM_STIM13 is shown in Table 2-162.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-162 ITM_STIM13 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.15 ITM_STIM14 Register (Offset = 38h) [Reset = 00000000h]

ITM_STIM14 is shown in Table 2-163.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-163 ITM_STIM14 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.16 ITM_STIM15 Register (Offset = 3Ch) [Reset = 00000000h]

ITM_STIM15 is shown in Table 2-164.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-164 ITM_STIM15 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.17 ITM_STIM16 Register (Offset = 40h) [Reset = 00000000h]

ITM_STIM16 is shown in Table 2-165.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-165 ITM_STIM16 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.18 ITM_STIM17 Register (Offset = 44h) [Reset = 00000000h]

ITM_STIM17 is shown in Table 2-166.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-166 ITM_STIM17 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.19 ITM_STIM18 Register (Offset = 48h) [Reset = 00000000h]

ITM_STIM18 is shown in Table 2-167.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-167 ITM_STIM18 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.20 ITM_STIM19 Register (Offset = 4Ch) [Reset = 00000000h]

ITM_STIM19 is shown in Table 2-168.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-168 ITM_STIM19 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.21 ITM_STIM20 Register (Offset = 50h) [Reset = 00000000h]

ITM_STIM20 is shown in Table 2-169.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-169 ITM_STIM20 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.22 ITM_STIM21 Register (Offset = 54h) [Reset = 00000000h]

ITM_STIM21 is shown in Table 2-170.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-170 ITM_STIM21 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.23 ITM_STIM22 Register (Offset = 58h) [Reset = 00000000h]

ITM_STIM22 is shown in Table 2-171.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-171 ITM_STIM22 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.24 ITM_STIM23 Register (Offset = 5Ch) [Reset = 00000000h]

ITM_STIM23 is shown in Table 2-172.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-172 ITM_STIM23 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.25 ITM_STIM24 Register (Offset = 60h) [Reset = 00000000h]

ITM_STIM24 is shown in Table 2-173.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-173 ITM_STIM24 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.26 ITM_STIM25 Register (Offset = 64h) [Reset = 00000000h]

ITM_STIM25 is shown in Table 2-174.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-174 ITM_STIM25 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.27 ITM_STIM26 Register (Offset = 68h) [Reset = 00000000h]

ITM_STIM26 is shown in Table 2-175.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-175 ITM_STIM26 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.28 ITM_STIM27 Register (Offset = 6Ch) [Reset = 00000000h]

ITM_STIM27 is shown in Table 2-176.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-176 ITM_STIM27 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.29 ITM_STIM28 Register (Offset = 70h) [Reset = 00000000h]

ITM_STIM28 is shown in Table 2-177.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-177 ITM_STIM28 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.30 ITM_STIM29 Register (Offset = 74h) [Reset = 00000000h]

ITM_STIM29 is shown in Table 2-178.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-178 ITM_STIM29 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.31 ITM_STIM30 Register (Offset = 78h) [Reset = 00000000h]

ITM_STIM30 is shown in Table 2-179.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-179 ITM_STIM30 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.32 ITM_STIM31 Register (Offset = 7Ch) [Reset = 00000000h]

ITM_STIM31 is shown in Table 2-180.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-180 ITM_STIM31 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR1hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.33 ITM_STIM32 Register (Offset = 80h) [Reset = 00000000h]

ITM_STIM32 is shown in Table 2-181.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-181 ITM_STIM32 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.34 ITM_STIM33 Register (Offset = 84h) [Reset = 00000000h]

ITM_STIM33 is shown in Table 2-182.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-182 ITM_STIM33 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.35 ITM_STIM34 Register (Offset = 88h) [Reset = 00000000h]

ITM_STIM34 is shown in Table 2-183.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-183 ITM_STIM34 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.36 ITM_STIM35 Register (Offset = 8Ch) [Reset = 00000000h]

ITM_STIM35 is shown in Table 2-184.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-184 ITM_STIM35 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.37 ITM_STIM36 Register (Offset = 90h) [Reset = 00000000h]

ITM_STIM36 is shown in Table 2-185.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-185 ITM_STIM36 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.38 ITM_STIM37 Register (Offset = 94h) [Reset = 00000000h]

ITM_STIM37 is shown in Table 2-186.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-186 ITM_STIM37 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.39 ITM_STIM38 Register (Offset = 98h) [Reset = 00000000h]

ITM_STIM38 is shown in Table 2-187.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-187 ITM_STIM38 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.40 ITM_STIM39 Register (Offset = 9Ch) [Reset = 00000000h]

ITM_STIM39 is shown in Table 2-188.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-188 ITM_STIM39 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.41 ITM_STIM40 Register (Offset = A0h) [Reset = 00000000h]

ITM_STIM40 is shown in Table 2-189.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-189 ITM_STIM40 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.42 ITM_STIM41 Register (Offset = A4h) [Reset = 00000000h]

ITM_STIM41 is shown in Table 2-190.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-190 ITM_STIM41 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.43 ITM_STIM42 Register (Offset = A8h) [Reset = 00000000h]

ITM_STIM42 is shown in Table 2-191.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-191 ITM_STIM42 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.44 ITM_STIM43 Register (Offset = ACh) [Reset = 00000000h]

ITM_STIM43 is shown in Table 2-192.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-192 ITM_STIM43 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.45 ITM_STIM44 Register (Offset = B0h) [Reset = 00000000h]

ITM_STIM44 is shown in Table 2-193.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-193 ITM_STIM44 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.46 ITM_STIM45 Register (Offset = B4h) [Reset = 00000000h]

ITM_STIM45 is shown in Table 2-194.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-194 ITM_STIM45 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.47 ITM_STIM46 Register (Offset = B8h) [Reset = 00000000h]

ITM_STIM46 is shown in Table 2-195.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-195 ITM_STIM46 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.48 ITM_STIM47 Register (Offset = BCh) [Reset = 00000000h]

ITM_STIM47 is shown in Table 2-196.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-196 ITM_STIM47 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.49 ITM_STIM48 Register (Offset = C0h) [Reset = 00000000h]

ITM_STIM48 is shown in Table 2-197.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-197 ITM_STIM48 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.50 ITM_STIM49 Register (Offset = C4h) [Reset = 00000000h]

ITM_STIM49 is shown in Table 2-198.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-198 ITM_STIM49 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.51 ITM_STIM50 Register (Offset = C8h) [Reset = 00000000h]

ITM_STIM50 is shown in Table 2-199.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-199 ITM_STIM50 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.52 ITM_STIM51 Register (Offset = CCh) [Reset = 00000000h]

ITM_STIM51 is shown in Table 2-200.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-200 ITM_STIM51 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.53 ITM_STIM52 Register (Offset = D0h) [Reset = 00000000h]

ITM_STIM52 is shown in Table 2-201.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-201 ITM_STIM52 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.54 ITM_STIM53 Register (Offset = D4h) [Reset = 00000000h]

ITM_STIM53 is shown in Table 2-202.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-202 ITM_STIM53 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.55 ITM_STIM54 Register (Offset = D8h) [Reset = 00000000h]

ITM_STIM54 is shown in Table 2-203.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-203 ITM_STIM54 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.56 ITM_STIM55 Register (Offset = DCh) [Reset = 00000000h]

ITM_STIM55 is shown in Table 2-204.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-204 ITM_STIM55 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.57 ITM_STIM56 Register (Offset = E0h) [Reset = 00000000h]

ITM_STIM56 is shown in Table 2-205.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-205 ITM_STIM56 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.58 ITM_STIM57 Register (Offset = E4h) [Reset = 00000000h]

ITM_STIM57 is shown in Table 2-206.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-206 ITM_STIM57 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.59 ITM_STIM58 Register (Offset = E8h) [Reset = 00000000h]

ITM_STIM58 is shown in Table 2-207.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-207 ITM_STIM58 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.60 ITM_STIM59 Register (Offset = ECh) [Reset = 00000000h]

ITM_STIM59 is shown in Table 2-208.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-208 ITM_STIM59 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.61 ITM_STIM60 Register (Offset = F0h) [Reset = 00000000h]

ITM_STIM60 is shown in Table 2-209.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-209 ITM_STIM60 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.62 ITM_STIM61 Register (Offset = F4h) [Reset = 00000000h]

ITM_STIM61 is shown in Table 2-210.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-210 ITM_STIM61 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.63 ITM_STIM62 Register (Offset = F8h) [Reset = 00000000h]

ITM_STIM62 is shown in Table 2-211.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-211 ITM_STIM62 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.64 ITM_STIM63 Register (Offset = FCh) [Reset = 00000000h]

ITM_STIM63 is shown in Table 2-212.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-212 ITM_STIM63 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.65 ITM_STIM64 Register (Offset = 100h) [Reset = 00000000h]

ITM_STIM64 is shown in Table 2-213.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-213 ITM_STIM64 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.66 ITM_STIM65 Register (Offset = 104h) [Reset = 00000000h]

ITM_STIM65 is shown in Table 2-214.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-214 ITM_STIM65 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.67 ITM_STIM66 Register (Offset = 108h) [Reset = 00000000h]

ITM_STIM66 is shown in Table 2-215.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-215 ITM_STIM66 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.68 ITM_STIM67 Register (Offset = 10Ch) [Reset = 00000000h]

ITM_STIM67 is shown in Table 2-216.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-216 ITM_STIM67 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.69 ITM_STIM68 Register (Offset = 110h) [Reset = 00000000h]

ITM_STIM68 is shown in Table 2-217.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-217 ITM_STIM68 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.70 ITM_STIM69 Register (Offset = 114h) [Reset = 00000000h]

ITM_STIM69 is shown in Table 2-218.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-218 ITM_STIM69 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.71 ITM_STIM70 Register (Offset = 118h) [Reset = 00000000h]

ITM_STIM70 is shown in Table 2-219.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-219 ITM_STIM70 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.72 ITM_STIM71 Register (Offset = 11Ch) [Reset = 00000000h]

ITM_STIM71 is shown in Table 2-220.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-220 ITM_STIM71 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.73 ITM_STIM72 Register (Offset = 120h) [Reset = 00000000h]

ITM_STIM72 is shown in Table 2-221.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-221 ITM_STIM72 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.74 ITM_STIM73 Register (Offset = 124h) [Reset = 00000000h]

ITM_STIM73 is shown in Table 2-222.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-222 ITM_STIM73 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.75 ITM_STIM74 Register (Offset = 128h) [Reset = 00000000h]

ITM_STIM74 is shown in Table 2-223.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-223 ITM_STIM74 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.76 ITM_STIM75 Register (Offset = 12Ch) [Reset = 00000000h]

ITM_STIM75 is shown in Table 2-224.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-224 ITM_STIM75 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.77 ITM_STIM76 Register (Offset = 130h) [Reset = 00000000h]

ITM_STIM76 is shown in Table 2-225.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-225 ITM_STIM76 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.78 ITM_STIM77 Register (Offset = 134h) [Reset = 00000000h]

ITM_STIM77 is shown in Table 2-226.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-226 ITM_STIM77 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.79 ITM_STIM78 Register (Offset = 138h) [Reset = 00000000h]

ITM_STIM78 is shown in Table 2-227.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-227 ITM_STIM78 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.80 ITM_STIM79 Register (Offset = 13Ch) [Reset = 00000000h]

ITM_STIM79 is shown in Table 2-228.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-228 ITM_STIM79 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.81 ITM_STIM80 Register (Offset = 140h) [Reset = 00000000h]

ITM_STIM80 is shown in Table 2-229.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-229 ITM_STIM80 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.82 ITM_STIM81 Register (Offset = 144h) [Reset = 00000000h]

ITM_STIM81 is shown in Table 2-230.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-230 ITM_STIM81 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.83 ITM_STIM82 Register (Offset = 148h) [Reset = 00000000h]

ITM_STIM82 is shown in Table 2-231.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-231 ITM_STIM82 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.84 ITM_STIM83 Register (Offset = 14Ch) [Reset = 00000000h]

ITM_STIM83 is shown in Table 2-232.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-232 ITM_STIM83 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.85 ITM_STIM84 Register (Offset = 150h) [Reset = 00000000h]

ITM_STIM84 is shown in Table 2-233.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-233 ITM_STIM84 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.86 ITM_STIM85 Register (Offset = 154h) [Reset = 00000000h]

ITM_STIM85 is shown in Table 2-234.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-234 ITM_STIM85 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.87 ITM_STIM86 Register (Offset = 158h) [Reset = 00000000h]

ITM_STIM86 is shown in Table 2-235.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-235 ITM_STIM86 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.88 ITM_STIM87 Register (Offset = 15Ch) [Reset = 00000000h]

ITM_STIM87 is shown in Table 2-236.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-236 ITM_STIM87 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.89 ITM_STIM88 Register (Offset = 160h) [Reset = 00000000h]

ITM_STIM88 is shown in Table 2-237.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-237 ITM_STIM88 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.90 ITM_STIM89 Register (Offset = 164h) [Reset = 00000000h]

ITM_STIM89 is shown in Table 2-238.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-238 ITM_STIM89 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.91 ITM_STIM90 Register (Offset = 168h) [Reset = 00000000h]

ITM_STIM90 is shown in Table 2-239.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-239 ITM_STIM90 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.92 ITM_STIM91 Register (Offset = 16Ch) [Reset = 00000000h]

ITM_STIM91 is shown in Table 2-240.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-240 ITM_STIM91 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.93 ITM_STIM92 Register (Offset = 170h) [Reset = 00000000h]

ITM_STIM92 is shown in Table 2-241.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-241 ITM_STIM92 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.94 ITM_STIM93 Register (Offset = 174h) [Reset = 00000000h]

ITM_STIM93 is shown in Table 2-242.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-242 ITM_STIM93 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.95 ITM_STIM94 Register (Offset = 178h) [Reset = 00000000h]

ITM_STIM94 is shown in Table 2-243.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-243 ITM_STIM94 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.96 ITM_STIM95 Register (Offset = 17Ch) [Reset = 00000000h]

ITM_STIM95 is shown in Table 2-244.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-244 ITM_STIM95 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.97 ITM_STIM96 Register (Offset = 180h) [Reset = 00000000h]

ITM_STIM96 is shown in Table 2-245.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-245 ITM_STIM96 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.98 ITM_STIM97 Register (Offset = 184h) [Reset = 00000000h]

ITM_STIM97 is shown in Table 2-246.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-246 ITM_STIM97 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.99 ITM_STIM98 Register (Offset = 188h) [Reset = 00000000h]

ITM_STIM98 is shown in Table 2-247.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-247 ITM_STIM98 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.100 ITM_STIM99 Register (Offset = 18Ch) [Reset = 00000000h]

ITM_STIM99 is shown in Table 2-248.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-248 ITM_STIM99 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.101 ITM_STIM100 Register (Offset = 190h) [Reset = 00000000h]

ITM_STIM100 is shown in Table 2-249.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-249 ITM_STIM100 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.102 ITM_STIM101 Register (Offset = 194h) [Reset = 00000000h]

ITM_STIM101 is shown in Table 2-250.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-250 ITM_STIM101 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.103 ITM_STIM102 Register (Offset = 198h) [Reset = 00000000h]

ITM_STIM102 is shown in Table 2-251.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-251 ITM_STIM102 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.104 ITM_STIM103 Register (Offset = 19Ch) [Reset = 00000000h]

ITM_STIM103 is shown in Table 2-252.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-252 ITM_STIM103 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.105 ITM_STIM104 Register (Offset = 1A0h) [Reset = 00000000h]

ITM_STIM104 is shown in Table 2-253.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-253 ITM_STIM104 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.106 ITM_STIM105 Register (Offset = 1A4h) [Reset = 00000000h]

ITM_STIM105 is shown in Table 2-254.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-254 ITM_STIM105 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.107 ITM_STIM106 Register (Offset = 1A8h) [Reset = 00000000h]

ITM_STIM106 is shown in Table 2-255.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-255 ITM_STIM106 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.108 ITM_STIM107 Register (Offset = 1ACh) [Reset = 00000000h]

ITM_STIM107 is shown in Table 2-256.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-256 ITM_STIM107 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.109 ITM_STIM108 Register (Offset = 1B0h) [Reset = 00000000h]

ITM_STIM108 is shown in Table 2-257.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-257 ITM_STIM108 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.110 ITM_STIM109 Register (Offset = 1B4h) [Reset = 00000000h]

ITM_STIM109 is shown in Table 2-258.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-258 ITM_STIM109 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.111 ITM_STIM110 Register (Offset = 1B8h) [Reset = 00000000h]

ITM_STIM110 is shown in Table 2-259.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-259 ITM_STIM110 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.112 ITM_STIM111 Register (Offset = 1BCh) [Reset = 00000000h]

ITM_STIM111 is shown in Table 2-260.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-260 ITM_STIM111 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.113 ITM_STIM112 Register (Offset = 1C0h) [Reset = 00000000h]

ITM_STIM112 is shown in Table 2-261.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-261 ITM_STIM112 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.114 ITM_STIM113 Register (Offset = 1C4h) [Reset = 00000000h]

ITM_STIM113 is shown in Table 2-262.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-262 ITM_STIM113 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.115 ITM_STIM114 Register (Offset = 1C8h) [Reset = 00000000h]

ITM_STIM114 is shown in Table 2-263.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-263 ITM_STIM114 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.116 ITM_STIM115 Register (Offset = 1CCh) [Reset = 00000000h]

ITM_STIM115 is shown in Table 2-264.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-264 ITM_STIM115 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.117 ITM_STIM116 Register (Offset = 1D0h) [Reset = 00000000h]

ITM_STIM116 is shown in Table 2-265.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-265 ITM_STIM116 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.118 ITM_STIM117 Register (Offset = 1D4h) [Reset = 00000000h]

ITM_STIM117 is shown in Table 2-266.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-266 ITM_STIM117 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.119 ITM_STIM118 Register (Offset = 1D8h) [Reset = 00000000h]

ITM_STIM118 is shown in Table 2-267.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-267 ITM_STIM118 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.120 ITM_STIM119 Register (Offset = 1DCh) [Reset = 00000000h]

ITM_STIM119 is shown in Table 2-268.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-268 ITM_STIM119 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.121 ITM_STIM120 Register (Offset = 1E0h) [Reset = 00000000h]

ITM_STIM120 is shown in Table 2-269.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-269 ITM_STIM120 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.122 ITM_STIM121 Register (Offset = 1E4h) [Reset = 00000000h]

ITM_STIM121 is shown in Table 2-270.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-270 ITM_STIM121 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.123 ITM_STIM122 Register (Offset = 1E8h) [Reset = 00000000h]

ITM_STIM122 is shown in Table 2-271.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-271 ITM_STIM122 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.124 ITM_STIM123 Register (Offset = 1ECh) [Reset = 00000000h]

ITM_STIM123 is shown in Table 2-272.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-272 ITM_STIM123 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.125 ITM_STIM124 Register (Offset = 1F0h) [Reset = 00000000h]

ITM_STIM124 is shown in Table 2-273.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-273 ITM_STIM124 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.126 ITM_STIM125 Register (Offset = 1F4h) [Reset = 00000000h]

ITM_STIM125 is shown in Table 2-274.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-274 ITM_STIM125 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.127 ITM_STIM126 Register (Offset = 1F8h) [Reset = 00000000h]

ITM_STIM126 is shown in Table 2-275.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-275 ITM_STIM126 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.128 ITM_STIM127 Register (Offset = 1FCh) [Reset = 00000000h]

ITM_STIM127 is shown in Table 2-276.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-276 ITM_STIM127 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.129 ITM_STIM128 Register (Offset = 200h) [Reset = 00000000h]

ITM_STIM128 is shown in Table 2-277.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-277 ITM_STIM128 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.130 ITM_STIM129 Register (Offset = 204h) [Reset = 00000000h]

ITM_STIM129 is shown in Table 2-278.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-278 ITM_STIM129 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.131 ITM_STIM130 Register (Offset = 208h) [Reset = 00000000h]

ITM_STIM130 is shown in Table 2-279.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-279 ITM_STIM130 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.132 ITM_STIM131 Register (Offset = 20Ch) [Reset = 00000000h]

ITM_STIM131 is shown in Table 2-280.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-280 ITM_STIM131 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.133 ITM_STIM132 Register (Offset = 210h) [Reset = 00000000h]

ITM_STIM132 is shown in Table 2-281.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-281 ITM_STIM132 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.134 ITM_STIM133 Register (Offset = 214h) [Reset = 00000000h]

ITM_STIM133 is shown in Table 2-282.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-282 ITM_STIM133 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.135 ITM_STIM134 Register (Offset = 218h) [Reset = 00000000h]

ITM_STIM134 is shown in Table 2-283.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-283 ITM_STIM134 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.136 ITM_STIM135 Register (Offset = 21Ch) [Reset = 00000000h]

ITM_STIM135 is shown in Table 2-284.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-284 ITM_STIM135 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.137 ITM_STIM136 Register (Offset = 220h) [Reset = 00000000h]

ITM_STIM136 is shown in Table 2-285.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-285 ITM_STIM136 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.138 ITM_STIM137 Register (Offset = 224h) [Reset = 00000000h]

ITM_STIM137 is shown in Table 2-286.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-286 ITM_STIM137 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.139 ITM_STIM138 Register (Offset = 228h) [Reset = 00000000h]

ITM_STIM138 is shown in Table 2-287.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-287 ITM_STIM138 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.140 ITM_STIM139 Register (Offset = 22Ch) [Reset = 00000000h]

ITM_STIM139 is shown in Table 2-288.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-288 ITM_STIM139 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.141 ITM_STIM140 Register (Offset = 230h) [Reset = 00000000h]

ITM_STIM140 is shown in Table 2-289.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-289 ITM_STIM140 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.142 ITM_STIM141 Register (Offset = 234h) [Reset = 00000000h]

ITM_STIM141 is shown in Table 2-290.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-290 ITM_STIM141 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.143 ITM_STIM142 Register (Offset = 238h) [Reset = 00000000h]

ITM_STIM142 is shown in Table 2-291.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-291 ITM_STIM142 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.144 ITM_STIM143 Register (Offset = 23Ch) [Reset = 00000000h]

ITM_STIM143 is shown in Table 2-292.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-292 ITM_STIM143 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.145 ITM_STIM144 Register (Offset = 240h) [Reset = 00000000h]

ITM_STIM144 is shown in Table 2-293.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-293 ITM_STIM144 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.146 ITM_STIM145 Register (Offset = 244h) [Reset = 00000000h]

ITM_STIM145 is shown in Table 2-294.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-294 ITM_STIM145 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.147 ITM_STIM146 Register (Offset = 248h) [Reset = 00000000h]

ITM_STIM146 is shown in Table 2-295.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-295 ITM_STIM146 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.148 ITM_STIM147 Register (Offset = 24Ch) [Reset = 00000000h]

ITM_STIM147 is shown in Table 2-296.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-296 ITM_STIM147 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.149 ITM_STIM148 Register (Offset = 250h) [Reset = 00000000h]

ITM_STIM148 is shown in Table 2-297.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-297 ITM_STIM148 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.150 ITM_STIM149 Register (Offset = 254h) [Reset = 00000000h]

ITM_STIM149 is shown in Table 2-298.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-298 ITM_STIM149 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.151 ITM_STIM150 Register (Offset = 258h) [Reset = 00000000h]

ITM_STIM150 is shown in Table 2-299.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-299 ITM_STIM150 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.152 ITM_STIM151 Register (Offset = 25Ch) [Reset = 00000000h]

ITM_STIM151 is shown in Table 2-300.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-300 ITM_STIM151 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.153 ITM_STIM152 Register (Offset = 260h) [Reset = 00000000h]

ITM_STIM152 is shown in Table 2-301.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-301 ITM_STIM152 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.154 ITM_STIM153 Register (Offset = 264h) [Reset = 00000000h]

ITM_STIM153 is shown in Table 2-302.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-302 ITM_STIM153 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.155 ITM_STIM154 Register (Offset = 268h) [Reset = 00000000h]

ITM_STIM154 is shown in Table 2-303.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-303 ITM_STIM154 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.156 ITM_STIM155 Register (Offset = 26Ch) [Reset = 00000000h]

ITM_STIM155 is shown in Table 2-304.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-304 ITM_STIM155 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.157 ITM_STIM156 Register (Offset = 270h) [Reset = 00000000h]

ITM_STIM156 is shown in Table 2-305.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-305 ITM_STIM156 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.158 ITM_STIM157 Register (Offset = 274h) [Reset = 00000000h]

ITM_STIM157 is shown in Table 2-306.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-306 ITM_STIM157 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.159 ITM_STIM158 Register (Offset = 278h) [Reset = 00000000h]

ITM_STIM158 is shown in Table 2-307.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-307 ITM_STIM158 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.160 ITM_STIM159 Register (Offset = 27Ch) [Reset = 00000000h]

ITM_STIM159 is shown in Table 2-308.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-308 ITM_STIM159 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.161 ITM_STIM160 Register (Offset = 280h) [Reset = 00000000h]

ITM_STIM160 is shown in Table 2-309.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-309 ITM_STIM160 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.162 ITM_STIM161 Register (Offset = 284h) [Reset = 00000000h]

ITM_STIM161 is shown in Table 2-310.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-310 ITM_STIM161 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.163 ITM_STIM162 Register (Offset = 288h) [Reset = 00000000h]

ITM_STIM162 is shown in Table 2-311.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-311 ITM_STIM162 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.164 ITM_STIM163 Register (Offset = 28Ch) [Reset = 00000000h]

ITM_STIM163 is shown in Table 2-312.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-312 ITM_STIM163 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.165 ITM_STIM164 Register (Offset = 290h) [Reset = 00000000h]

ITM_STIM164 is shown in Table 2-313.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-313 ITM_STIM164 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.166 ITM_STIM165 Register (Offset = 294h) [Reset = 00000000h]

ITM_STIM165 is shown in Table 2-314.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-314 ITM_STIM165 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.167 ITM_STIM166 Register (Offset = 298h) [Reset = 00000000h]

ITM_STIM166 is shown in Table 2-315.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-315 ITM_STIM166 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.168 ITM_STIM167 Register (Offset = 29Ch) [Reset = 00000000h]

ITM_STIM167 is shown in Table 2-316.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-316 ITM_STIM167 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.169 ITM_STIM168 Register (Offset = 2A0h) [Reset = 00000000h]

ITM_STIM168 is shown in Table 2-317.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-317 ITM_STIM168 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.170 ITM_STIM169 Register (Offset = 2A4h) [Reset = 00000000h]

ITM_STIM169 is shown in Table 2-318.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-318 ITM_STIM169 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.171 ITM_STIM170 Register (Offset = 2A8h) [Reset = 00000000h]

ITM_STIM170 is shown in Table 2-319.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-319 ITM_STIM170 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.172 ITM_STIM171 Register (Offset = 2ACh) [Reset = 00000000h]

ITM_STIM171 is shown in Table 2-320.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-320 ITM_STIM171 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.173 ITM_STIM172 Register (Offset = 2B0h) [Reset = 00000000h]

ITM_STIM172 is shown in Table 2-321.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-321 ITM_STIM172 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.174 ITM_STIM173 Register (Offset = 2B4h) [Reset = 00000000h]

ITM_STIM173 is shown in Table 2-322.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-322 ITM_STIM173 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.175 ITM_STIM174 Register (Offset = 2B8h) [Reset = 00000000h]

ITM_STIM174 is shown in Table 2-323.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-323 ITM_STIM174 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.176 ITM_STIM175 Register (Offset = 2BCh) [Reset = 00000000h]

ITM_STIM175 is shown in Table 2-324.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-324 ITM_STIM175 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.177 ITM_STIM176 Register (Offset = 2C0h) [Reset = 00000000h]

ITM_STIM176 is shown in Table 2-325.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-325 ITM_STIM176 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.178 ITM_STIM177 Register (Offset = 2C4h) [Reset = 00000000h]

ITM_STIM177 is shown in Table 2-326.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-326 ITM_STIM177 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.179 ITM_STIM178 Register (Offset = 2C8h) [Reset = 00000000h]

ITM_STIM178 is shown in Table 2-327.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-327 ITM_STIM178 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.180 ITM_STIM179 Register (Offset = 2CCh) [Reset = 00000000h]

ITM_STIM179 is shown in Table 2-328.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-328 ITM_STIM179 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.181 ITM_STIM180 Register (Offset = 2D0h) [Reset = 00000000h]

ITM_STIM180 is shown in Table 2-329.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-329 ITM_STIM180 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.182 ITM_STIM181 Register (Offset = 2D4h) [Reset = 00000000h]

ITM_STIM181 is shown in Table 2-330.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-330 ITM_STIM181 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.183 ITM_STIM182 Register (Offset = 2D8h) [Reset = 00000000h]

ITM_STIM182 is shown in Table 2-331.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-331 ITM_STIM182 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.184 ITM_STIM183 Register (Offset = 2DCh) [Reset = 00000000h]

ITM_STIM183 is shown in Table 2-332.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-332 ITM_STIM183 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.185 ITM_STIM184 Register (Offset = 2E0h) [Reset = 00000000h]

ITM_STIM184 is shown in Table 2-333.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-333 ITM_STIM184 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.186 ITM_STIM185 Register (Offset = 2E4h) [Reset = 00000000h]

ITM_STIM185 is shown in Table 2-334.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-334 ITM_STIM185 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.187 ITM_STIM186 Register (Offset = 2E8h) [Reset = 00000000h]

ITM_STIM186 is shown in Table 2-335.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-335 ITM_STIM186 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.188 ITM_STIM187 Register (Offset = 2ECh) [Reset = 00000000h]

ITM_STIM187 is shown in Table 2-336.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-336 ITM_STIM187 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.189 ITM_STIM188 Register (Offset = 2F0h) [Reset = 00000000h]

ITM_STIM188 is shown in Table 2-337.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-337 ITM_STIM188 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.190 ITM_STIM189 Register (Offset = 2F4h) [Reset = 00000000h]

ITM_STIM189 is shown in Table 2-338.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-338 ITM_STIM189 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.191 ITM_STIM190 Register (Offset = 2F8h) [Reset = 00000000h]

ITM_STIM190 is shown in Table 2-339.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-339 ITM_STIM190 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.192 ITM_STIM191 Register (Offset = 2FCh) [Reset = 00000000h]

ITM_STIM191 is shown in Table 2-340.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-340 ITM_STIM191 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.193 ITM_STIM192 Register (Offset = 300h) [Reset = 00000000h]

ITM_STIM192 is shown in Table 2-341.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-341 ITM_STIM192 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.194 ITM_STIM193 Register (Offset = 304h) [Reset = 00000000h]

ITM_STIM193 is shown in Table 2-342.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-342 ITM_STIM193 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.195 ITM_STIM194 Register (Offset = 308h) [Reset = 00000000h]

ITM_STIM194 is shown in Table 2-343.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-343 ITM_STIM194 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.196 ITM_STIM195 Register (Offset = 30Ch) [Reset = 00000000h]

ITM_STIM195 is shown in Table 2-344.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-344 ITM_STIM195 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.197 ITM_STIM196 Register (Offset = 310h) [Reset = 00000000h]

ITM_STIM196 is shown in Table 2-345.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-345 ITM_STIM196 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.198 ITM_STIM197 Register (Offset = 314h) [Reset = 00000000h]

ITM_STIM197 is shown in Table 2-346.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-346 ITM_STIM197 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.199 ITM_STIM198 Register (Offset = 318h) [Reset = 00000000h]

ITM_STIM198 is shown in Table 2-347.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-347 ITM_STIM198 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.200 ITM_STIM199 Register (Offset = 31Ch) [Reset = 00000000h]

ITM_STIM199 is shown in Table 2-348.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-348 ITM_STIM199 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.201 ITM_STIM200 Register (Offset = 320h) [Reset = 00000000h]

ITM_STIM200 is shown in Table 2-349.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-349 ITM_STIM200 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.202 ITM_STIM201 Register (Offset = 324h) [Reset = 00000000h]

ITM_STIM201 is shown in Table 2-350.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-350 ITM_STIM201 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.203 ITM_STIM202 Register (Offset = 328h) [Reset = 00000000h]

ITM_STIM202 is shown in Table 2-351.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-351 ITM_STIM202 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.204 ITM_STIM203 Register (Offset = 32Ch) [Reset = 00000000h]

ITM_STIM203 is shown in Table 2-352.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-352 ITM_STIM203 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.205 ITM_STIM204 Register (Offset = 330h) [Reset = 00000000h]

ITM_STIM204 is shown in Table 2-353.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-353 ITM_STIM204 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.206 ITM_STIM205 Register (Offset = 334h) [Reset = 00000000h]

ITM_STIM205 is shown in Table 2-354.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-354 ITM_STIM205 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.207 ITM_STIM206 Register (Offset = 338h) [Reset = 00000000h]

ITM_STIM206 is shown in Table 2-355.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-355 ITM_STIM206 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.208 ITM_STIM207 Register (Offset = 33Ch) [Reset = 00000000h]

ITM_STIM207 is shown in Table 2-356.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-356 ITM_STIM207 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.209 ITM_STIM208 Register (Offset = 340h) [Reset = 00000000h]

ITM_STIM208 is shown in Table 2-357.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-357 ITM_STIM208 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.210 ITM_STIM209 Register (Offset = 344h) [Reset = 00000000h]

ITM_STIM209 is shown in Table 2-358.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-358 ITM_STIM209 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.211 ITM_STIM210 Register (Offset = 348h) [Reset = 00000000h]

ITM_STIM210 is shown in Table 2-359.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-359 ITM_STIM210 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.212 ITM_STIM211 Register (Offset = 34Ch) [Reset = 00000000h]

ITM_STIM211 is shown in Table 2-360.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-360 ITM_STIM211 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.213 ITM_STIM212 Register (Offset = 350h) [Reset = 00000000h]

ITM_STIM212 is shown in Table 2-361.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-361 ITM_STIM212 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.214 ITM_STIM213 Register (Offset = 354h) [Reset = 00000000h]

ITM_STIM213 is shown in Table 2-362.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-362 ITM_STIM213 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.215 ITM_STIM214 Register (Offset = 358h) [Reset = 00000000h]

ITM_STIM214 is shown in Table 2-363.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-363 ITM_STIM214 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.216 ITM_STIM215 Register (Offset = 35Ch) [Reset = 00000000h]

ITM_STIM215 is shown in Table 2-364.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-364 ITM_STIM215 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.217 ITM_STIM216 Register (Offset = 360h) [Reset = 00000000h]

ITM_STIM216 is shown in Table 2-365.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-365 ITM_STIM216 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.218 ITM_STIM217 Register (Offset = 364h) [Reset = 00000000h]

ITM_STIM217 is shown in Table 2-366.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-366 ITM_STIM217 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.219 ITM_STIM218 Register (Offset = 368h) [Reset = 00000000h]

ITM_STIM218 is shown in Table 2-367.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-367 ITM_STIM218 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.220 ITM_STIM219 Register (Offset = 36Ch) [Reset = 00000000h]

ITM_STIM219 is shown in Table 2-368.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-368 ITM_STIM219 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.221 ITM_STIM220 Register (Offset = 370h) [Reset = 00000000h]

ITM_STIM220 is shown in Table 2-369.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-369 ITM_STIM220 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.222 ITM_STIM221 Register (Offset = 374h) [Reset = 00000000h]

ITM_STIM221 is shown in Table 2-370.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-370 ITM_STIM221 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.223 ITM_STIM222 Register (Offset = 378h) [Reset = 00000000h]

ITM_STIM222 is shown in Table 2-371.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-371 ITM_STIM222 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.224 ITM_STIM223 Register (Offset = 37Ch) [Reset = 00000000h]

ITM_STIM223 is shown in Table 2-372.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-372 ITM_STIM223 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.225 ITM_STIM224 Register (Offset = 380h) [Reset = 00000000h]

ITM_STIM224 is shown in Table 2-373.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-373 ITM_STIM224 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.226 ITM_STIM225 Register (Offset = 384h) [Reset = 00000000h]

ITM_STIM225 is shown in Table 2-374.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-374 ITM_STIM225 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.227 ITM_STIM226 Register (Offset = 388h) [Reset = 00000000h]

ITM_STIM226 is shown in Table 2-375.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-375 ITM_STIM226 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.228 ITM_STIM227 Register (Offset = 38Ch) [Reset = 00000000h]

ITM_STIM227 is shown in Table 2-376.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-376 ITM_STIM227 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.229 ITM_STIM228 Register (Offset = 390h) [Reset = 00000000h]

ITM_STIM228 is shown in Table 2-377.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-377 ITM_STIM228 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.230 ITM_STIM229 Register (Offset = 394h) [Reset = 00000000h]

ITM_STIM229 is shown in Table 2-378.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-378 ITM_STIM229 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.231 ITM_STIM230 Register (Offset = 398h) [Reset = 00000000h]

ITM_STIM230 is shown in Table 2-379.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-379 ITM_STIM230 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.232 ITM_STIM231 Register (Offset = 39Ch) [Reset = 00000000h]

ITM_STIM231 is shown in Table 2-380.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-380 ITM_STIM231 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.233 ITM_STIM232 Register (Offset = 3A0h) [Reset = 00000000h]

ITM_STIM232 is shown in Table 2-381.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-381 ITM_STIM232 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.234 ITM_STIM233 Register (Offset = 3A4h) [Reset = 00000000h]

ITM_STIM233 is shown in Table 2-382.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-382 ITM_STIM233 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.235 ITM_STIM234 Register (Offset = 3A8h) [Reset = 00000000h]

ITM_STIM234 is shown in Table 2-383.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-383 ITM_STIM234 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.236 ITM_STIM235 Register (Offset = 3ACh) [Reset = 00000000h]

ITM_STIM235 is shown in Table 2-384.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-384 ITM_STIM235 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.237 ITM_STIM236 Register (Offset = 3B0h) [Reset = 00000000h]

ITM_STIM236 is shown in Table 2-385.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-385 ITM_STIM236 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.238 ITM_STIM237 Register (Offset = 3B4h) [Reset = 00000000h]

ITM_STIM237 is shown in Table 2-386.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-386 ITM_STIM237 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.239 ITM_STIM238 Register (Offset = 3B8h) [Reset = 00000000h]

ITM_STIM238 is shown in Table 2-387.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-387 ITM_STIM238 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.240 ITM_STIM239 Register (Offset = 3BCh) [Reset = 00000000h]

ITM_STIM239 is shown in Table 2-388.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-388 ITM_STIM239 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.241 ITM_STIM240 Register (Offset = 3C0h) [Reset = 00000000h]

ITM_STIM240 is shown in Table 2-389.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-389 ITM_STIM240 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.242 ITM_STIM241 Register (Offset = 3C4h) [Reset = 00000000h]

ITM_STIM241 is shown in Table 2-390.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-390 ITM_STIM241 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.243 ITM_STIM242 Register (Offset = 3C8h) [Reset = 00000000h]

ITM_STIM242 is shown in Table 2-391.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-391 ITM_STIM242 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.244 ITM_STIM243 Register (Offset = 3CCh) [Reset = 00000000h]

ITM_STIM243 is shown in Table 2-392.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-392 ITM_STIM243 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.245 ITM_STIM244 Register (Offset = 3D0h) [Reset = 00000000h]

ITM_STIM244 is shown in Table 2-393.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-393 ITM_STIM244 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.246 ITM_STIM245 Register (Offset = 3D4h) [Reset = 00000000h]

ITM_STIM245 is shown in Table 2-394.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-394 ITM_STIM245 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.247 ITM_STIM246 Register (Offset = 3D8h) [Reset = 00000000h]

ITM_STIM246 is shown in Table 2-395.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-395 ITM_STIM246 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.248 ITM_STIM247 Register (Offset = 3DCh) [Reset = 00000000h]

ITM_STIM247 is shown in Table 2-396.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-396 ITM_STIM247 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.249 ITM_STIM248 Register (Offset = 3E0h) [Reset = 00000000h]

ITM_STIM248 is shown in Table 2-397.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-397 ITM_STIM248 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.250 ITM_STIM249 Register (Offset = 3E4h) [Reset = 00000000h]

ITM_STIM249 is shown in Table 2-398.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-398 ITM_STIM249 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.251 ITM_STIM250 Register (Offset = 3E8h) [Reset = 00000000h]

ITM_STIM250 is shown in Table 2-399.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-399 ITM_STIM250 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.252 ITM_STIM251 Register (Offset = 3ECh) [Reset = 00000000h]

ITM_STIM251 is shown in Table 2-400.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-400 ITM_STIM251 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.253 ITM_STIM252 Register (Offset = 3F0h) [Reset = 00000000h]

ITM_STIM252 is shown in Table 2-401.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-401 ITM_STIM252 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.254 ITM_STIM253 Register (Offset = 3F4h) [Reset = 00000000h]

ITM_STIM253 is shown in Table 2-402.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-402 ITM_STIM253 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.255 ITM_STIM254 Register (Offset = 3F8h) [Reset = 00000000h]

ITM_STIM254 is shown in Table 2-403.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-403 ITM_STIM254 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.256 ITM_STIM255 Register (Offset = 3FCh) [Reset = 00000000h]

ITM_STIM255 is shown in Table 2-404.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-404 ITM_STIM255 Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1DISABLEDR0hIndicates whether the Stimulus Port is enabled or disabled
31-0STIMULUSW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.
0FIFOREADYR0hIndicates whether the Stimulus Port can accept data

2.7.9.257 ITM_TER0 Register (Offset = E00h) [Reset = 00000000h]

ITM_TER0 is shown in Table 2-405.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-405 ITM_TER0 Register Field Descriptions
BitFieldTypeResetDescription
31-0STIMENAR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.258 ITM_TER1 Register (Offset = E04h) [Reset = 00000000h]

ITM_TER1 is shown in Table 2-406.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-406 ITM_TER1 Register Field Descriptions
BitFieldTypeResetDescription
31-0STIMENAR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.259 ITM_TER2 Register (Offset = E08h) [Reset = 00000000h]

ITM_TER2 is shown in Table 2-407.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-407 ITM_TER2 Register Field Descriptions
BitFieldTypeResetDescription
31-0STIMENAR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.260 ITM_TER3 Register (Offset = E0Ch) [Reset = 00000000h]

ITM_TER3 is shown in Table 2-408.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-408 ITM_TER3 Register Field Descriptions
BitFieldTypeResetDescription
31-0STIMENAR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.261 ITM_TER4 Register (Offset = E10h) [Reset = 00000000h]

ITM_TER4 is shown in Table 2-409.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-409 ITM_TER4 Register Field Descriptions
BitFieldTypeResetDescription
31-0STIMENAR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.262 ITM_TER5 Register (Offset = E14h) [Reset = 00000000h]

ITM_TER5 is shown in Table 2-410.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-410 ITM_TER5 Register Field Descriptions
BitFieldTypeResetDescription
31-0STIMENAR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.263 ITM_TER6 Register (Offset = E18h) [Reset = 00000000h]

ITM_TER6 is shown in Table 2-411.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-411 ITM_TER6 Register Field Descriptions
BitFieldTypeResetDescription
31-0STIMENAR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.264 ITM_TER7 Register (Offset = E1Ch) [Reset = 00000000h]

ITM_TER7 is shown in Table 2-412.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-412 ITM_TER7 Register Field Descriptions
BitFieldTypeResetDescription
31-0STIMENAR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.265 ITM_TPR Register (Offset = E40h) [Reset = 00000000h]

ITM_TPR is shown in Table 2-413.

Return to the Summary Table.

Controls which stimulus ports can be accessed by unprivileged code

Table 2-413 ITM_TPR Register Field Descriptions
BitFieldTypeResetDescription
31-4RES0RXhReserved, RES0
3-0PRIVMASKR/W0hBit mask to enable tracing on ITM stimulus ports

2.7.9.266 ITM_TCR Register (Offset = E80h) [Reset = 00000000h]

ITM_TCR is shown in Table 2-414.

Return to the Summary Table.

Configures and controls transfers through the ITM interface

Table 2-414 ITM_TCR Register Field Descriptions
BitFieldTypeResetDescription
31-24RES0R0hReserved, RES0
23BUSYR0hIndicates whether the ITM is currently processing events
22-16TraceBusIDR/W0hIdentifier for multi-source trace stream formatting. If multi-source trace is in use, the debugger must write a unique non-zero trace ID value to this field
15-12RES0_1R0hReserved, RES0
11-10GTSFREQR/W0hDefines how often the ITM generates a global timestamp, based on the global timestamp clock frequency, or disables generation of global timestamps
9-8TSPrescaleR/W0hLocal timestamp prescaler, used with the trace packet reference clock
7-6RES0_2R0hReserved, RES0
5STALLENAR/W0hStall the PE to ensure delivery of Data Trace packets.
4SWOENAR/W0hEnables asynchronous clocking of the timestamp counter
3TXENAR/W0hEnables forwarding of hardware event packet from the DWT unit to the ITM for output to the TPIU
2SYNCENAR/W0hEnables Synchronization packet transmission for a synchronous TPIU
1TSENAR/W0hEnables Local timestamp generation
0ITMENAR/W0hEnables the ITM

2.7.9.267 INT_ATREADY Register (Offset = EF0h) [Reset = 00000000h]

INT_ATREADY is shown in Table 2-415.

Return to the Summary Table.

Integration Mode: Read ATB Ready

Table 2-415 INT_ATREADY Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1AFVALIDR0hA read of this bit returns the value of AFVALID
0ATREADYR0hA read of this bit returns the value of ATREADY

2.7.9.268 INT_ATVALID Register (Offset = EF8h) [Reset = 00000000h]

INT_ATVALID is shown in Table 2-416.

Return to the Summary Table.

Integration Mode: Write ATB Valid

Table 2-416 INT_ATVALID Register Field Descriptions
BitFieldTypeResetDescription
31-2RES0R0hReserved, RES0
1AFREADYW0hA write to this bit gives the value of AFREADY
0ATREADYW0hA write to this bit gives the value of ATVALID

2.7.9.269 ITM_ITCTRL Register (Offset = F00h) [Reset = 00000000h]

ITM_ITCTRL is shown in Table 2-417.

Return to the Summary Table.

Integration Mode Control Register

Table 2-417 ITM_ITCTRL Register Field Descriptions
BitFieldTypeResetDescription
31-1RES0R0hReserved, RES0
0IMER/W0hIntegration mode enable bit - The possible values are: 0 - The trace unit is not in integration mode. 1 - The trace unit is in integration mode. This mode enables: A debug agent to perform topology detection. SoC test software to perform integration testing.

2.7.9.270 ITM_DEVARCH Register (Offset = FBCh) [Reset = 00000000h]

ITM_DEVARCH is shown in Table 2-418.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-418 ITM_DEVARCH Register Field Descriptions
BitFieldTypeResetDescription
31-21ARCHITECTR23BhDefines the architect of the component. Bits [31:28] are the JEP106 continuation code (JEP106 bank ID, minus 1) and bits [27:21] are the JEP106 ID code.
20PRESENTR1hDefines that the DEVARCH register is present
19-16REVISIONR0hDefines the architecture revision of the component
15-12ARCHVERR1hDefines the architecture version of the component
11-0ARCHPARTRA01hDefines the architecture of the component

2.7.9.271 ITM_DEVTYPE Register (Offset = FCCh) [Reset = 00000000h]

ITM_DEVTYPE is shown in Table 2-419.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-419 ITM_DEVTYPE Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-4SUBR4hComponent sub-type
3-0MAJORR3hComponent major type

2.7.9.272 ITM_PIDR4 Register (Offset = FD0h) [Reset = 00000000h]

ITM_PIDR4 is shown in Table 2-420.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-420 ITM_PIDR4 Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-4SIZER0hSee CoreSight Architecture Specification
3-0DES_2R4hSee CoreSight Architecture Specification

2.7.9.273 ITM_PIDR5 Register (Offset = FD4h) [Reset = 00000000h]

ITM_PIDR5 is shown in Table 2-421.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-421 ITM_PIDR5 Register Field Descriptions
BitFieldTypeResetDescription
31-0RES0R0hReserved, RES0

2.7.9.274 ITM_PIDR6 Register (Offset = FD8h) [Reset = 00000000h]

ITM_PIDR6 is shown in Table 2-422.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-422 ITM_PIDR6 Register Field Descriptions
BitFieldTypeResetDescription
31-0RES0R0hReserved, RES0

2.7.9.275 ITM_PIDR7 Register (Offset = FDCh) [Reset = 00000000h]

ITM_PIDR7 is shown in Table 2-423.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-423 ITM_PIDR7 Register Field Descriptions
BitFieldTypeResetDescription
31-0RES0R0hReserved, RES0

2.7.9.276 ITM_PIDR0 Register (Offset = FE0h) [Reset = 00000000h]

ITM_PIDR0 is shown in Table 2-424.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-424 ITM_PIDR0 Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-0PART_0R21hSee CoreSight Architecture Specification

2.7.9.277 ITM_PIDR1 Register (Offset = FE4h) [Reset = 00000000h]

ITM_PIDR1 is shown in Table 2-425.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-425 ITM_PIDR1 Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-4DES_0RBhSee CoreSight Architecture Specification
3-0PART_1RDhSee CoreSight Architecture Specification

2.7.9.278 ITM_PIDR2 Register (Offset = FE8h) [Reset = 00000000h]

ITM_PIDR2 is shown in Table 2-426.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-426 ITM_PIDR2 Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-4REVISIONR0hSee CoreSight Architecture Specification
3JEDECR1hSee CoreSight Architecture Specification
2-0DES_1R3hSee CoreSight Architecture Specification

2.7.9.279 ITM_PIDR3 Register (Offset = FECh) [Reset = 00000000h]

ITM_PIDR3 is shown in Table 2-427.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-427 ITM_PIDR3 Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-4REVANDR0hSee CoreSight Architecture Specification
3-0CMODR0hSee CoreSight Architecture Specification

2.7.9.280 ITM_CIDR0 Register (Offset = FF0h) [Reset = 00000000h]

ITM_CIDR0 is shown in Table 2-428.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-428 ITM_CIDR0 Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-0PRMBL_0RDhSee CoreSight Architecture Specification

2.7.9.281 ITM_CIDR1 Register (Offset = FF4h) [Reset = 00000000h]

ITM_CIDR1 is shown in Table 2-429.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-429 ITM_CIDR1 Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-4CLASSR9hSee CoreSight Architecture Specification
3-0PRMBL_1R0hSee CoreSight Architecture Specification

2.7.9.282 ITM_CIDR2 Register (Offset = FF8h) [Reset = 00000000h]

ITM_CIDR2 is shown in Table 2-430.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-430 ITM_CIDR2 Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-0PRMBL_2R5hSee CoreSight Architecture Specification

2.7.9.283 ITM_CIDR3 Register (Offset = FFCh) [Reset = 00000000h]

ITM_CIDR3 is shown in Table 2-431.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-431 ITM_CIDR3 Register Field Descriptions
BitFieldTypeResetDescription
31-8RES0RXhReserved, RES0
7-0PRMBL_3RB1hSee CoreSight Architecture Specification