Product details

Features Rating Catalog Operating temperature range (C) -40 to 125
Features Rating Catalog Operating temperature range (C) -40 to 125
WSON (DSC) 10 9 mm² 3 x 3
  • Output Current Accuracy (-40°C to +125°C)
  • Input Voltage Range: 3V to 5.5V
  • 6-Bit Current DAC That Connects Directly to the Feedback Node of an External Regulator to Provide Output Voltage Control
  • Precision Enable to Support Custom UVLO
  • WSON-10 3 mm x 3 mm Footprint, 0.5 mm Pitch
  • Compatible With the TMS320C66XX DSP Smart Reflex Technology

All trademarks are the property of their respective owners.

  • Output Current Accuracy (-40°C to +125°C)
  • Input Voltage Range: 3V to 5.5V
  • 6-Bit Current DAC That Connects Directly to the Feedback Node of an External Regulator to Provide Output Voltage Control
  • Precision Enable to Support Custom UVLO
  • WSON-10 3 mm x 3 mm Footprint, 0.5 mm Pitch
  • Compatible With the TMS320C66XX DSP Smart Reflex Technology

All trademarks are the property of their respective owners.

The LM10010 is a precision, digitally programmed device used to control the output voltage of a DC/DC converter. The LM10010 outputs a DC current inversely proportional to a 6-bit input word. This current DAC output connects to the feedback pin of a regulator in order to adjust its output voltage to a desired range and resolution set by the user. As the 6-bit word counts up, the output voltage is adjusted higher based on the setting of the feedback resistors in the converter.

The LM10010 is designed to program point of load regulators with adjustable resistor feedback networks for VID (Voltage Identification).

The LM10010 is a precision, digitally programmed device used to control the output voltage of a DC/DC converter. The LM10010 outputs a DC current inversely proportional to a 6-bit input word. This current DAC output connects to the feedback pin of a regulator in order to adjust its output voltage to a desired range and resolution set by the user. As the 6-bit word counts up, the output voltage is adjusted higher based on the setting of the feedback resistors in the converter.

The LM10010 is designed to program point of load regulators with adjustable resistor feedback networks for VID (Voltage Identification).

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet LM10010 VID Voltage Programmer for Point of Load Regulator datasheet (Rev. C) 27 Mar 2013
Technical article How smart AFEs offer an integrated analog solution for thermoelectric cooling control 04 Jan 2022
Technical article Dynamic Voltage Scaling - Improve System Efficiency and Thermal Performance 09 Dec 2014
Technical article How to optimize your DSP power budget 03 Oct 2013
User guide AN-2176 LM10010 Evaluation Board (Rev. B) 06 May 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

LM10010EVM — Evaluation Board for the LM10010

This evaluation module provides a VID interface to demonstrate the LM10010 and its control of an LM21215A-1 buck regulator. While operating from 3.0V to 5.5V, the LM10010 can adjust the LM21215A-1 output voltage from 0.7V to 1.1V in 6.4mV steps with a default startup output of 1.0V. A (...)

In stock
Limit: 5
GUI for evaluation module (EVM)

LM10010 GUI Installer

SNVC035.ZIP (114332 KB)
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Calculation tool

LM10010-QUICKSTART-CAL — LM10010 quickstart cal

The LM10010 is a precision, digitally programmed device used to control the output voltage of a DC/DC converter. The LM10010 outputs a DC current inversely proportional to a 6-bit input word. This current DAC output connects to the feedback pin of a regulator in order to adjust its output voltage (...)
Package Pins Download
WSON (DSC) 10 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos