Top
1-Bit Unidirectional Voltage-Level Translator, SN74AUP1T34-Q1

SN74AUP1T34-Q1

ACTIVE

Product details

Parameters

Technology Family AUP1T Applications GPIO Bits (#) 1 IOH (Max) (mA) -6 IOL (Max) (mA) 6 Rating Automotive open-in-new Find other Unidirectional voltage translators

Package | Pins | Size

SOT-SC70 (DCK) 5 4 mm² 2 x 2.1 open-in-new Find other Unidirectional voltage translators

Features

  • Qualified for Automotive Applications
    • AEC-Q100 Qualified
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature
    • Device HBM ESD Classification Level 3A
    • Device CDM ESD Classification Level C5
  • Wide Operating VCC Range of 0.9 V to 3.6 V
  • Balanced Propagation Delays: tPLH = tPHL
    (1.8-V to 3.3-V Translation Typical)
  • Low Static-Power Consumption: Maximum of 5-µA
    ICC
  • ±6-mA Output Drive at 3 V
  • Ioff Supports Partial Power-Down-Mode Operation
  • VCC Isolation Feature – If VCCA Input Is at GND,
    B Port Is in the High-Impedance state
  • Input Hysteresis Allows Slow Input Transition and
    Better Switching Noise Immunity at Input
  • ESD Protection Exceeds JESD 22
  • 5000-V Human-Body Model (AEC-Q100-002-E)
  • Latch-Up Performance Meets
    100 mA Per Q100-004-D
open-in-new Find other Unidirectional voltage translators

Description

The SN74AUP1T34-Q1 device is a 1-bit noninverting translator that uses two separate configurable power-supply rails. It is a unidirectional translator from A to B. The A port is designed to track VCCA. VCCA accepts supply voltages from 0.9 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts supply voltages from 0.9 V to 3.6 V. This allows for low-voltage translation between 1-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes. The SN74AUP1T34-Q1 is also fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

The VCC isolation feature ensures that if VCCA input is at GND, the B port is in the high-impedance state. If VCCB input is at GND, any input to the A side does not cause the leakage current even floating.

open-in-new Find other Unidirectional voltage translators
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 3
Type Title Date
* Datasheet SN74AUP1T34-Q1 1-Bit Unidirectional Voltage-Level Translator datasheet (Rev. A) Apr. 27, 2016
Selection guides Voltage translation buying guide Jun. 13, 2019
Technical articles Using level shifters in automotive applications Mar. 28, 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
10
Description
Flexible EVM designed to support any device that has a DCK, DCT, DCU, DRL, or DBV package in a 5 to 8 pin count.
Features
  • Board design allows for versatility in evaluation
  • Supports a wide-range of logic devices

Design tools & simulation

SIMULATION MODELS Download
SCEM565.ZIP (50 KB) - IBIS Model

CAD/CAE symbols

Package Pins Download
SC70 (DCK) 5 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos