Produktdetails

Sample rate (max) (Msps) 3000 Resolution (Bits) 8 Number of input channels 1 Interface type Parallel LVDS Analog input BW (MHz) 3000 Features Ultra High Speed Rating Catalog Peak-to-peak input voltage range (V) 0.82 Power consumption (typ) (mW) 1900 Architecture Folding Interpolating SNR (dB) 45.4 ENOB (Bits) 7.2 SFDR (dB) 57 Operating temperature range (°C) -40 to 85 Input buffer Yes
Sample rate (max) (Msps) 3000 Resolution (Bits) 8 Number of input channels 1 Interface type Parallel LVDS Analog input BW (MHz) 3000 Features Ultra High Speed Rating Catalog Peak-to-peak input voltage range (V) 0.82 Power consumption (typ) (mW) 1900 Architecture Folding Interpolating SNR (dB) 45.4 ENOB (Bits) 7.2 SFDR (dB) 57 Operating temperature range (°C) -40 to 85 Input buffer Yes
HLQFP (NNB) 128 484 mm² 22 x 22

  • Single +1.9V ±0.1V Operation
  • Choice of SDR or DDR output clocking
  • Serial Interface for Extended Control
  • Adjustment of Input Full-Scale Range and Offset
  • Duty Cycle Corrected Sample Clock
  • Test pattern

  • Key Specifications

    Resolution

    8 Bits

    Max Conversion Rate

    3 GSPS (min)

    Error Rate

    10 -18 (typ)

    ENOB @ 748 MHz Input

    7.0 Bits (typ)

    SNR @ 748 MHz

    44.5 dB (typ)

    Full Power Bandwidth

    3 GHz (typ)

  • Power Consumption
  • Operating

    1.9 W (typ)

    Power Down Mode

    25 mW (typ)


  • Single +1.9V ±0.1V Operation
  • Choice of SDR or DDR output clocking
  • Serial Interface for Extended Control
  • Adjustment of Input Full-Scale Range and Offset
  • Duty Cycle Corrected Sample Clock
  • Test pattern

  • Key Specifications

    Resolution

    8 Bits

    Max Conversion Rate

    3 GSPS (min)

    Error Rate

    10 -18 (typ)

    ENOB @ 748 MHz Input

    7.0 Bits (typ)

    SNR @ 748 MHz

    44.5 dB (typ)

    Full Power Bandwidth

    3 GHz (typ)

  • Power Consumption
  • Operating

    1.9 W (typ)

    Power Down Mode

    25 mW (typ)


    The ADC083000 is a single, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 3.4 GSPS. Consuming a typical 1.9 Watts at 3 GSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable an excellent response of all dynamic parameters up to Nyquist, producing a high 7.0 Effective Number Of Bits, (ENOB) with a 748 MHz input signal and a 3 GHz sample rate while providing a 10 -18 Word Error Rate. The ADC083000 achieves a 3 GSPS sampling rate by utilizing both the rising and falling edge of a 1.5 GHz input clock. Output formatting is offset binary and the LVDS digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.15V.

    The ADC has a 1:4 demultiplexer that feeds four LVDS buses and reduces the output data rate on each bus to a quarter of the sampling rate.

    The converter typically consumes less than 25 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad LQFP and operates over the Industrial (-40°C TA +85°C) temperature range.


    The ADC083000 is a single, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 3.4 GSPS. Consuming a typical 1.9 Watts at 3 GSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable an excellent response of all dynamic parameters up to Nyquist, producing a high 7.0 Effective Number Of Bits, (ENOB) with a 748 MHz input signal and a 3 GHz sample rate while providing a 10 -18 Word Error Rate. The ADC083000 achieves a 3 GSPS sampling rate by utilizing both the rising and falling edge of a 1.5 GHz input clock. Output formatting is offset binary and the LVDS digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.15V.

    The ADC has a 1:4 demultiplexer that feeds four LVDS buses and reduces the output data rate on each bus to a quarter of the sampling rate.

    The converter typically consumes less than 25 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad LQFP and operates over the Industrial (-40°C TA +85°C) temperature range.


    Herunterladen Video mit Transkript ansehen Video

    Ähnliche Produkte, die für Sie interessant sein könnten

    Ähnliche Funktionalität wie verglichener Baustein
    ADC08B3000 AKTIV Analog-zu-Digital-Wandler (ADC), 8 Bit, 3,0 GSPS, mit 4 K Puffer Same speed and resolution, with internal 4-k data buffer

    Technische Dokumentation

    star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
    Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
    Alle anzeigen 4
    Typ Titel Datum
    * Data sheet ADC083000 8-Bit, 3 GSPS, High Performance, Low Power A/D Converter datasheet (Rev. N) 06 Jul 2009
    Technical article RF sampling: aliasing can be your friend PDF | HTML 22 Jul 2015
    User guide Single low power, ultra high speed CMOS A/D Converter User Guide 27 Jan 2012
    Application note Selecting Amplifiers, ADCs, and Clocks for High-Performance Signal Paths 13 Sep 2007

    Design und Entwicklung

    Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

    Simulationsmodell

    ADC083000 IBIS Model

    SNAM005.ZIP (9 KB) - IBIS Model
    Simulationstool

    PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

    PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
    Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
    HLQFP (NNB) 128 Ultra Librarian

    Bestellen & Qualität

    Beinhaltete Information:
    • RoHS
    • REACH
    • Bausteinkennzeichnung
    • Blei-Finish/Ball-Material
    • MSL-Rating / Spitzenrückfluss
    • MTBF-/FIT-Schätzungen
    • Materialinhalt
    • Qualifikationszusammenfassung
    • Kontinuierliches Zuverlässigkeitsmonitoring
    Beinhaltete Information:
    • Werksstandort
    • Montagestandort

    Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

    Support und Schulungen

    TI E2E™-Foren mit technischem Support von TI-Ingenieuren

    Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

    Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

    Videos