25-MHz clock out, 802.1AE MACsec, Cable diagnostics, IEEE 1588v2/802.1AS time synchronization and clock generation, IEEE 802.3bp & Open Alliance (OA) compliant, Integrated LPF, Single supply, TC10, Wettable flank package

I/O supply voltage (typ) (V)

1.8, 2.5, 3.3

Operating temperature range (°C)

-40 to 125

Number of LEDs

2

ESD HBM (kV)

8

Datarate (Mbps)

100BASE-T1

Interface type

MII, RGMII, RMII, SGMII

Number of ports

Single

Rating

Automotive

Features

25-MHz clock out, 802.1AE MACsec, Cable diagnostics, IEEE 1588v2/802.1AS time synchronization and clock generation, IEEE 802.3bp & Open Alliance (OA) compliant, Integrated LPF, Single supply, TC10, Wettable flank package

I/O supply voltage (typ) (V)

1.8, 2.5, 3.3

Operating temperature range (°C)

-40 to 125

Number of LEDs

2

ESD HBM (kV)

8

VQFN (RHA)

36

36 mm² 6 x 6

IEEE 802.1AE MACsec
- MACsec frame expansion: Inbuilt buffering and flow control support to handle 12 byte IPG ethernet frames
- Authentication, encryption at line rate
- Cipher suites: GCM-AES-XPN-128/256, GCM-AES-128/256
- Secure Channel: Total 16 SAK enabling 8 Tx/Rx SC
- Auto rollover support for SAK
- Ingress/Egress classification for Ethertype, VLAN, DMAC: up to 8 parallel rules
- Window replay protection
IEEE 802.1AS time synchronization
- Highly accurate 1pps signal < +/-5 ns
- Precise time stamping for MACsec encoded PTP packets
- Multiple IOs for event capture and trigger
IEEE 802.3bw & OA 100BASE-T1 compliant
TC-10 compliant
- < 20µA sleep current
- Fast wake from sleep by retaining PHY configuration during sleep (optional)
MAC Interfaces: MII, RMII, RGMII, SGMII
Pin compatible with TI’s 1000BASE-T1 PHY
- Single board design for 100BASE-T1 and 1000BASE-T1 with required BOM change
Diagnostic tool kit
- Signal Quality Indication (SQI) & Time Domain Reflectometry (TDR)
- Voltage, Temperature & ESD sensors
AEC-Q100 qualified for Automotive Applications:
- Temperature grade 1: –40°C to +125 °C

IEEE 802.1AE MACsec
- MACsec frame expansion: Inbuilt buffering and flow control support to handle 12 byte IPG ethernet frames
- Authentication, encryption at line rate
- Cipher suites: GCM-AES-XPN-128/256, GCM-AES-128/256
- Secure Channel: Total 16 SAK enabling 8 Tx/Rx SC
- Auto rollover support for SAK
- Ingress/Egress classification for Ethertype, VLAN, DMAC: up to 8 parallel rules
- Window replay protection
IEEE 802.1AS time synchronization
- Highly accurate 1pps signal < +/-5 ns
- Precise time stamping for MACsec encoded PTP packets
- Multiple IOs for event capture and trigger
IEEE 802.3bw & OA 100BASE-T1 compliant
TC-10 compliant
- < 20µA sleep current
- Fast wake from sleep by retaining PHY configuration during sleep (optional)
MAC Interfaces: MII, RMII, RGMII, SGMII
Pin compatible with TI’s 1000BASE-T1 PHY
- Single board design for 100BASE-T1 and 1000BASE-T1 with required BOM change
Diagnostic tool kit
- Signal Quality Indication (SQI) & Time Domain Reflectometry (TDR)
- Voltage, Temperature & ESD sensors
AEC-Q100 qualified for Automotive Applications:
- Temperature grade 1: –40°C to +125 °C

The DP83TC817-Q1 device is an IEEE 802.3bw automotive Ethernet physical layer transceiver. The device provides all physical layer functions needed to transmit and receive data, and xMII interface flexibility. DP83TC817-Q1 is compliant to Open Alliance EMC and interoperable specifications over unshielded single twisted-pair cable. DP83TC817-Q1 supports OA TC-10 low power sleep feature with wake forwarding for reduced system power consumption when communication is not required.

The DP83TC817-Q1 integrates IEEE 802.1AE line rate security with authentication and optional encryption support, to secure communication over the network. The PHY supports up to 16 secure association (SA) channels with automatic SAK rollover and extended packet numbering support. DP83TC817-Q1 offers ingress classification to filter the unwanted packets & supports WAN MACsec for end-to-end security.

DP83TC817-Q1 also integrates 1588v2/802.1AS to enable highly accurate time synchronization and hardware timestamping for ADAS applications. DP83TC817-Q1 also offers precise time stamping and synchronization with encrypted PTP packets.

DP83TC817-Q1 is footprint compatible to TI’s 100BASE-T1 PHYs and 1000BASE-T1 PHYs enabling design scalability with a single board for different speeds and features.

The DP83TC817-Q1 device is an IEEE 802.3bw automotive Ethernet physical layer transceiver. The device provides all physical layer functions needed to transmit and receive data, and xMII interface flexibility. DP83TC817-Q1 is compliant to Open Alliance EMC and interoperable specifications over unshielded single twisted-pair cable. DP83TC817-Q1 supports OA TC-10 low power sleep feature with wake forwarding for reduced system power consumption when communication is not required.

The DP83TC817-Q1 integrates IEEE 802.1AE line rate security with authentication and optional encryption support, to secure communication over the network. The PHY supports up to 16 secure association (SA) channels with automatic SAK rollover and extended packet numbering support. DP83TC817-Q1 offers ingress classification to filter the unwanted packets & supports WAN MACsec for end-to-end security.

DP83TC817-Q1 also integrates 1588v2/802.1AS to enable highly accurate time synchronization and hardware timestamping for ADAS applications. DP83TC817-Q1 also offers precise time stamping and synchronization with encrypted PTP packets.

DP83TC817-Q1 is footprint compatible to TI’s 100BASE-T1 PHYs and 1000BASE-T1 PHYs enabling design scalability with a single board for different speeds and features.

filter

Andere Ethernet-PHYs suchen

Herunterladen Video mit Transkript ansehen Video

Weitere Informationen anfordern

Das vollständige Datenblatt und weitere Designressourcen sind verfügbar. Jetzt anfordern

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	DP83TC817-Q1 Precise and Secure 100BASE-T1 Automotive Ethernet with TC10, IEEE802.1AS and IEEE802.1AE MACsec datasheet	PDF \| HTML	18 Apr 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

Optionen anzeigen

Gehäuse	Pins	Herunterladen
VQFN (RHA)	36	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

DP83TC817S-Q1

100BASE-T1-Ethernet-PHY für die Automobilindustrie, Zeitpräzision mit TC-10 und MACsec

DP83TC817S-Q1

Produktdetails

Weitere Informationen anfordern

Technische Dokumentation

Design und Entwicklung

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos