Home Verstärker Verstärker für Spezialfunktionen Logarithmische Verstärker
NEU

LOG305

AKTIV

Energieeffizienter logarithmischer Detektor mit 95 dB Dynamikbereich

Produktdetails

Offset voltage (input amplifiers) (max) (mV) 150 Vs (±) (min) (V) 2.7 Vs (±) (max) (V) 5.25 Iq (max) (mA) 1.8 Dynamic range (typ) (dB) 95 Reference type Ext, External Full-scale output voltage (min) (±V) 0.12 Full-scale output voltage (max) (±V) 5.05 Conformity error (initial 5 decades) (max) (%) 1.4 Conformity error (initial 5 decades) (typ. over temp) (%/°C) 2 Operating temperature range (°C) -40 to 125 Rating Catalog
Offset voltage (input amplifiers) (max) (mV) 150 Vs (±) (min) (V) 2.7 Vs (±) (max) (V) 5.25 Iq (max) (mA) 1.8 Dynamic range (typ) (dB) 95 Reference type Ext, External Full-scale output voltage (min) (±V) 0.12 Full-scale output voltage (max) (±V) 5.05 Conformity error (initial 5 decades) (max) (%) 1.4 Conformity error (initial 5 decades) (typ. over temp) (%/°C) 2 Operating temperature range (°C) -40 to 125 Rating Catalog
WSON (DRV) 6 4 mm² (2 mm × 2 mm)
  • Input Range: 18µVRMS to 1VRMS
  • Temperature: –40°C to +125°C
  • Dynamic range: 95dB
  • Log conformance error (LCE) = ±2dB
  • Signal detection from 200kHz to 100MHz
  • Quiescent current: 1.5mA max across temperature
  • Supply: 2.7V to 5.25V
  • Integrated Op Amp for buffering / gain adjustment
  • Input Range: 18µVRMS to 1VRMS
  • Temperature: –40°C to +125°C
  • Dynamic range: 95dB
  • Log conformance error (LCE) = ±2dB
  • Signal detection from 200kHz to 100MHz
  • Quiescent current: 1.5mA max across temperature
  • Supply: 2.7V to 5.25V
  • Integrated Op Amp for buffering / gain adjustment

The LOG305 is a Log Detector / RSSI Detector with very low power consumption. This device supports an input frequency from 200kHz to 100MHz and a typical dynamic range of 95dB. The LOG305 can support beyond these frequencies at reduced sensitivity. The LOG305 is intended for use in applications that require a wide dynamic range of voltage and signal measurement. This device supports single ended input and unipolar or bipolar supplies.

The LOG305 is available in a 6-pin DRV package. The LOG305 is operational from a 2.7V to 5.25V supply and over the full ambient temperature range of –40°C to +125°C.

The LOG305 is a Log Detector / RSSI Detector with very low power consumption. This device supports an input frequency from 200kHz to 100MHz and a typical dynamic range of 95dB. The LOG305 can support beyond these frequencies at reduced sensitivity. The LOG305 is intended for use in applications that require a wide dynamic range of voltage and signal measurement. This device supports single ended input and unipolar or bipolar supplies.

The LOG305 is available in a 6-pin DRV package. The LOG305 is operational from a 2.7V to 5.25V supply and over the full ambient temperature range of –40°C to +125°C.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt LOG305 95dB Dynamic Range, Logarithmic Detector for Cost-Sensitive Applications datasheet (Rev. B) PDF | HTML 01.07.2026
Anwendungshinweis Ultrasonic Sensing Using LOG Detector Amplifier PDF | HTML 01.10.2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LOG305DRVEVM — LOG305 – Evaluierungsmodul

Das LOG305DRVEVM ist das Evaluierungsmodul für den LOG305-Log-Detektor/RSSI-Detektor im 6-poligen WSON-Gehäuse (DRV). Das Evaluierungsmodul wurde entwickelt, um die Funktionalität und Vielseitigkeit des Geräts auf schnelle und einfache Weise zu demonstrieren. Das EVM ist für den Anschluss an (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

LOG305 TINA-TI Reference Design

SLOM537 (547 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WSON (DRV) 6 Ultra Librarian

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos