SN65LVDS31-EP

AKTIV

Verbessertes Produkt, Vierfach-LVDS-Transmitter

Produktdetails

Function Driver Protocols LVDS Number of transmitters 4 Number of receivers 0 Signaling rate (Mbps) 400 Input signal LVTTL Output signal LVDS Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
Function Driver Protocols LVDS Number of transmitters 4 Number of receivers 0 Signaling rate (Mbps) 400 Input signal LVTTL Output signal LVDS Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
SOIC (D) 16 59.4 mm² (9.9 mm × 6 mm)
  • Meet or Exceed the Requirements of ANSI TIA/EIA-644 Standard
  • Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and 100-Ω Load
  • Typical Output Voltage Rise and Fall Times of 500 ps (400 Mbps)
  • Typical Propagation Delay Times of 1.7 ns
  • Operate From a Single 3.3-V Supply
  • Power Dissipation 25 mW Typical Per Driver at 200 MHz
  • Driver at High Impedance When Disabled or With VCC = 0
  • Bus-Terminal ESD Protection Exceeds 8 kV
  • Low-Voltage TTL (LVTTL) Logic Input Levels
  • Pin Compatible With AM26LS31, MC3487, and µA9638
  • Cold Sparing for Space and High Reliability Applications Requiring Redundancy
  • Meet or Exceed the Requirements of ANSI TIA/EIA-644 Standard
  • Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and 100-Ω Load
  • Typical Output Voltage Rise and Fall Times of 500 ps (400 Mbps)
  • Typical Propagation Delay Times of 1.7 ns
  • Operate From a Single 3.3-V Supply
  • Power Dissipation 25 mW Typical Per Driver at 200 MHz
  • Driver at High Impedance When Disabled or With VCC = 0
  • Bus-Terminal ESD Protection Exceeds 8 kV
  • Low-Voltage TTL (LVTTL) Logic Input Levels
  • Pin Compatible With AM26LS31, MC3487, and µA9638
  • Cold Sparing for Space and High Reliability Applications Requiring Redundancy

The SN65LVDS31 is a differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. This driver will deliver a minimum differential output voltage magnitude of 247 mV into a 100-Ω load when enabled.

The intended application of this device and signaling technique is both point-to-point and multidrop (one driver and multiple receivers) data transmission over controlled impedance media of approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

The SN65LVDS31 is characterized for operation from –55°C to 125°C.

The SN65LVDS31 is a differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. This driver will deliver a minimum differential output voltage magnitude of 247 mV into a 100-Ω load when enabled.

The intended application of this device and signaling technique is both point-to-point and multidrop (one driver and multiple receivers) data transmission over controlled impedance media of approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

The SN65LVDS31 is characterized for operation from –55°C to 125°C.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie der verglichene Baustein.
SN65LVDS33-EP AKTIV Erweitertes Produkt, Highspeed-Differenzialempfänger Line Receiver variant

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt SN65LVDS31-EP High-Speed Differential Line Drivers datasheet 22.09.2011
* Strahlungs- und Zuverlässigkeitsbericht SN65LVDS31MDREP Reliability Report 07.01.2013
* VID SN65LVDS31-EP VID V6207627 21.06.2016
Application brief LVDS to Improve EMC in Motor Drives 27.09.2018
Application brief How Far, How Fast Can You Operate LVDS Drivers and Receivers? 03.08.2018
Application brief How to Terminate LVDS Connections with DC and AC Coupling 16.05.2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AWRL1432BOOST-BSD — AWRL1432 mmWave-Sensor-Evaluierungsplatine mit Einzelchip-Architektur zur Totwinkelerkennung

AWRL1432BOOST-BSD ist ein benutzerfreundliches Evaluierungskit für 70 GHz-mmWave-Sensoren, basierend auf demAWRL1432-Baustein mit integrierter ROGERS RO3003-Hochleistungsantenne. Diese Platine ermöglicht den Zugriff auf Punktwolkendaten und die Nutzung der Power-over-USB-Schnittstelle. Das (...)

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

AWRL6432BOOST — AWRL6432BOOST BoosterPack™ Evaluierung für Single-Chip-Millimeterwellen-Radarsensor mit geringem Str

AWRL6432BOOST ist eine benutzerfreundliche 60 GHz-Millimeterwellen-Sensor-Evaluierungsplattform mit geringem Stromverbrauch für den AWRL6432 mit einer integrierten FR4-Antenne. Diese Platine ermöglicht den Zugriff auf Punktwolkendaten und die Nutzung von Power-over-USB-Schnittstellen.

Das (...)

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

IWRL1432BOOST-BSD — IWRL1432 Evaluierungsmodul für energieeffizienten Einzel-Chip-industriellen Radarsensor, 76 GHz bis

IWRL1432BOOST-BSD ist ein benutzerfreundliches Evaluierungskit für 77 GHz-mmWave-Sensoren, basierend auf dem IWRL1432-Baustein mit integrierter ROGERS RO3003-Hochleistungsantenne. Diese Platine ermöglicht den Zugriff auf Punktwolkendaten und die Nutzung der Power-over-USB-Schnittstelle. Der (...)

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

IWRL6432BOOST — IWRL6432 BoosterPack™-Evaluierungsmodul für einen 60 GHz-mmWave-Einzelchip-Sensor mit geringem Strom

IWRL6432BOOST ist ein benutzerfreundliches Evaluierungskit für 60 GHz-mmWave-Sensoren, basierend auf dem IWRL6432-Baustein mit integrierter FR4-Antenne. Diese Platine ermöglicht den Zugriff auf Punktwolkendaten und die Nutzung der Power-over-USB-Schnittstelle. Das IWRL6432BOOST unterstützt die (...)

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

SN65LVDS31-32BEVM — SN65LVDS31-32BEVM-Evaluierungsmodul für LVDS31 und LVDS32B

TI offers a series of low-voltage differential signaling (LVDS) evaluation modules (EVMs) designed for analysis of the electrical characteristics of LVDS drivers and receivers. Four unique EVMs are available to evaluate the different classes of LVDS devices offered by TI.

Combination Table

As seen (...)

Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

SN65LVDS31-32EVM — SN65LVDS31-32EVM-Evaluierungsmodul für SNx5LVDS31 und SNx5LVDS32

The SN65LVDS31-32EVM evaluation moduel (EVM) includes the SV65LVDS31 quad driver and the SN65LVDS32 quad receiver. The SN65LVDS31 device is a TIA/EIA-644 standard-compliant LVDS driver. The SN65LVDS32 device is a TIA/EIA-644 standard-compliant receiver that has a passive open-circuit failsafe (...)

Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

SN65LVDS31-33EVM — Evaluierungsmodul für SN65LVDS31 und SN65LVDS33

TI offers a series of low-voltage differential signaling (LVDS) evaluation modules (EVMs) designed for analysis of the electrical characteristics of LVDS drivers and receivers. Four unique EVMs are available to evaluate the different classes of LVDS devices offered by TI.

As seen in the Combination (...)

Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

SN65LVDS31 IBIS Model (Rev. B)

SLLC012A (29 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Referenzdesign

TIDEP-01040 — Referenzdesign für Wafer-Chip-Scale-Gehäuse mit 60 GHz mmWave-Sensor für industrielle Anwendungen

Dieses Referenzdesign ist auf Anwendungen ausgelegt, die einen kleineren Formfaktor und einen geringen Stromverbrauch erfordern. Das Design basiert auf dem 60-GHz-mmWave-Radarbaustein IWRL6432W von TI und verwendet ein vierlagiges PCB-Stackup mit FR408HR-Material von Isola®. Das Referenzdesign (...)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (D) 16 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos