Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)

TPS62840

AKTIV

Hocheffizienter Abwärtswandler, 60 nA Ruhestrom (IQ), 1,8 bis 6,5 VIN, 750 mA

Produktdetails

Rating Catalog Topology Buck Iout (max) (A) 0.75 Vin (max) (V) 6.5 Vin (min) (V) 1.8 Vout (max) (V) 1.55, 3.3, 3.4, 3.6 Vout (min) (V) 0.8, 1.8, 3.4 Features Enable, Fixed Output, Forced PWM, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode DCS-Control Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 1800 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 0.06 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 0.75 Vin (max) (V) 6.5 Vin (min) (V) 1.8 Vout (max) (V) 1.55, 3.3, 3.4, 3.6 Vout (min) (V) 0.8, 1.8, 3.4 Features Enable, Fixed Output, Forced PWM, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode DCS-Control Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 1800 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 0.06 Duty cycle (max) (%) 100 Type Converter
DSBGA (YBG) 6 1.4136 mm² 0.95 x 1.488 HVSSOP (DGR) 8 9 mm² 3 x 3 VSON-HR (DLC) 8 3 mm² 2 x 1.5
  • 60-nA operating quiescent current
  • 100% duty-cycle mode with 120-nA IQ
  • Input voltage range VIN from 1.8 V to 6.5 V
  • Output current up to 750 mA
  • RF friendly DCS-Control™
  • 80% efficiency at 1 µA IOUT (3.6 VIN to 1.8 VOUT)
  • 16 selectable output voltages via VSET pin
  • Auto transition PFM/PWM or forced-PWM mode
  • Selectable forced PWM and STOP modes
  • Output discharge function
  • 25-nA shutdown current
  • SON-8, WCSP-6 and thermally enhanced HVSSOP-8 packages
  • 60-nA operating quiescent current
  • 100% duty-cycle mode with 120-nA IQ
  • Input voltage range VIN from 1.8 V to 6.5 V
  • Output current up to 750 mA
  • RF friendly DCS-Control™
  • 80% efficiency at 1 µA IOUT (3.6 VIN to 1.8 VOUT)
  • 16 selectable output voltages via VSET pin
  • Auto transition PFM/PWM or forced-PWM mode
  • Selectable forced PWM and STOP modes
  • Output discharge function
  • 25-nA shutdown current
  • SON-8, WCSP-6 and thermally enhanced HVSSOP-8 packages

The TPS62840 is a high-efficiency step-down converter with ultra-low operating quiescent current of typically 60 nA. The device contains special circuitry to achieve just 120 nA IQ in 100% mode to further extend battery life near the end of discharge.

The device uses DCS-Control to cleanly power radios and operates with a typical switching frequency of 1.8 MHz. In Power-Save Mode, the device extends the light load efficiency down to a load current range of 1 µA and below.

16 predefined output voltages can be selected by connecting a resistor to pin VSET, making the device flexible for various applications with a minimum amount of external components.

The STOP pin of the device immediately eliminates any switching noise in order to take a noise-free measurement in test and measurement systems.

The TPS62840 provides an output current of up to 750 mA. With an input voltage of 1.8 V to 6.5 V, the device supports multiple power sources such as 2S to 4S Alkaline, 1S to 2S Li-MnO2, or 1S Li-Ion/Li-SOCl2.

The TPS62840 is a high-efficiency step-down converter with ultra-low operating quiescent current of typically 60 nA. The device contains special circuitry to achieve just 120 nA IQ in 100% mode to further extend battery life near the end of discharge.

The device uses DCS-Control to cleanly power radios and operates with a typical switching frequency of 1.8 MHz. In Power-Save Mode, the device extends the light load efficiency down to a load current range of 1 µA and below.

16 predefined output voltages can be selected by connecting a resistor to pin VSET, making the device flexible for various applications with a minimum amount of external components.

The STOP pin of the device immediately eliminates any switching noise in order to take a noise-free measurement in test and measurement systems.

The TPS62840 provides an output current of up to 750 mA. With an input voltage of 1.8 V to 6.5 V, the device supports multiple power sources such as 2S to 4S Alkaline, 1S to 2S Li-MnO2, or 1S Li-Ion/Li-SOCl2.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
TPS62843 AKTIV 600 mA-Abwärtswandler mit extrem niedrigem IQ und 1,8 bis 5,5 V Eingang Low IQ 275-nA DC/DC converter with compact solution size of 5.7 mm2

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 30
Typ Titel Datum
* Data sheet TPS62840 1.8-V to 6.5-V, 750-mA, 60-nA IQ Step-Down Converter datasheet (Rev. D) PDF | HTML 27 Apr 2020
Application note Using the TPS6284x in an Inverting Buck-Boost Topology PDF | HTML 09 Jan 2025
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 06 Dez 2023
White paper Overcoming Low-IQ Challenges in Low-Power Applications (Rev. B) PDF | HTML 12 Apr 2023
Application note Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 23 Mai 2022
Technical article 3 quiescent-current (Iq) specifications you need to understand PDF | HTML 12 Nov 2021
Application note High-Performance CMOS Image Sensor Power Supply in Industrial Camera and Vision (Rev. A) 30 Jul 2021
Application note Extend Battery Life with <100 nA IQ Buck Converter Achieving <150 µV Voltage Rip (Rev. A) PDF | HTML 07 Mai 2021
Selection guide Buck Converter Quick Reference Guide (Rev. B) 08 Apr 2021
Technical article Advantages of the STOP function for low-noise data-acquisition applications PDF | HTML 31 Mär 2020
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 14 Okt 2019
EVM User's guide TPS62842EVM-103 User's Guide 28 Aug 2019
Technical article Deciphering low Iq: Using WEBENCH® to design near 100% duty-cycle for ultra-low po PDF | HTML 15 Jul 2019
Technical article Do all rails need low Iq? PDF | HTML 15 Jul 2019
EVM User's guide TPS62840-1YBGEVM56 User's Guide 24 Mai 2019
EVM User's guide TPS62840-1DLCEVM55 User's Guide 15 Mai 2019
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 11 Dez 2018
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 22 Jun 2018
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 24 Okt 2017
Technical article Never lose your luggage again with a smart tracker design PDF | HTML 20 Okt 2017
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 24 Okt 2016
Analog Design Journal Understanding frequency variation in the DCS-Control(TM) topology 30 Okt 2015
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 17 Aug 2015
Analog Design Journal Five steps to a great PCB layout for a step-down converter 29 Jan 2015
Analog Design Journal Accurately measuring efficiency of ultralow-IQ devices 22 Jan 2014
Analog Design Journal High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 25 Jul 2013
Application note How to Measure the Control Loop of DCS-Control Devices (Rev. A) 09 Aug 2012
Application note Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 13 Jan 2012
Application note Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 19 Sep 2011
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 17 Jun 2011

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS62840-1DLCEVM55 — Evaluierungsmodul für hocheffiziente Abwärtswandler mit 60 nA IQ, QFN-Gehäuse und 750 mA (2 Schaltkr

Das TPS62840-1DLCEVM55-Evaluierungsmodul (EVM) erleichtert die Evaluierung der TPS6284XDLC -Familie von Abwärtswandlern mit 750 mA und 60 nA IQ in kleinen 1,5 mm x 2,0 mm großen QFN-Gehäusen. Das EVM enthält zwei separate Schaltkreise, um Ausgangsspannungen zwischen 0,8 V und 3,3 V aus höheren (...)

Benutzerhandbuch: PDF
Evaluierungsplatine

TPS62840-1YBGEVM56 — Evaluierungsmodul für hocheffiziente Abwärtswandler mit 60 nA IQ, WCSP-Gehäuse und 750 mA (2 Schaltk

Das TPS62840-1YBGEVM056-Evaluierungsmodul (EVM) erleichtert die Evaluierung der TPS6284XYBG -Familie von Abwärtswandlern mit 750 mA und 60 nA IQ in kleinen, 1,5 mm x 1 mm großen WCSP-Gehäusen mit 0,4 mm Pitch. Das EVM enthält zwei separate Schaltkreise, um bei einer maximalen Lösungshöhe von 1 mm (...)

Benutzerhandbuch: PDF
Evaluierungsplatine

TPS62841-2EVM123 — Evaluierungsmodul für TPS62841 und TPS62842, 60 nA IQ, DGR-Gehäuse, 750-mA-Abwärtswandler (2 Schaltk

Das TPS62841-2EVM123-Evaluierungsmodul (EVM) erleichtert die Evaluierung der Familie TPS6284XDGR von 750-mA-Abwärtswandlern mit 60 nA Ruhestrom in HVSSOP-Gehäusen mit hoher thermischer Leistung. Das EVM enthält zwei separate Schaltkreise, um Ausgangsspannungen zwischen 0,8 V und 3,6 V aus höheren (...)

Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

TPS62842EVM-103 — Evaluierungsmodul für hocheffizienten 750-mA-Abwärtswandler mit 60 nA Ruhestrom im DGR-Gehäuse

Das Evaluierungsmodul (EVM) TPS62842EVM-103 ermöglicht die Evaluierung des 750-mA-Abwärtswandlers TPS62842DGR, mit 60 nA Ruhestrom in einem HVSSOP-Gehäuse mit hoher thermischer Leistung. Das EVM enthält einen Schaltkreis, um Ausgangsspannungen zwischen 1,8 V und 3,6 V aus höheren Eingangsspannungen (...)

Benutzerhandbuch: PDF
Simulationsmodell

TPS62840 PSpice Unencrypted Transient Model (Rev. C)

SLUM691C.ZIP (83 KB) - PSpice Model
Simulationsmodell

TPS62841 PSPICE Model

SLVMD75.ZIP (98 KB) - PSpice Model
Simulationsmodell

TPS62842 PSpice Transient Model

SLVMD74.ZIP (92 KB) - PSpice Model
Gerberdatei

BSR055 Gerbers

SLVC773.ZIP (452 KB)
Gerberdatei

BSR056 Gerbers

SLVC774.ZIP (445 KB)
Referenzdesigns

TIDA-010300 — Low-power CGM sensor reference design with 20mm footprint

This continuous glucose monitor (CGM) reference design provides a comprehensive evaluation platform for TI's latest resources in low-power and continuous monitoring of glucose for diabetes care. The reference design utilizes an analog front-end (AFE) for low- power and accurate electrochemical (...)
Design guide: PDF
Referenzdesigns

TIDA-010224 — Referenzdesign für energieeffiziente drahtlose Kamera mit verlängerter Batterielaufzeit

Dieses Referenzdesign bietet eine Lösung für eine batteriebetriebene drahtlose Kamera durch die Kombination von branchenführender Bildverarbeitung, Konnektivität, Sensor und Energie. Hocheffiziente Stromwandler und eine optimierte Systemarchitektur tragen dazu bei, die Lebensdauer der Batterien zu (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-010072 — Referenzdesign zur Luftstrom- und Ventilsteuerung für Beatmungsanwendungen

Dieses Referenzdesign bietet ein kompaktes Systemdesign, das eine Motorbeschleunigung und -verzögerung von bis zu ± 200 kU/min unterstützt, was eine wichtige Anforderung in vielen Atemschutzanwendungen darstellt. Das Design unterstützt eine Reihe von Offboard-C2000-Controllern, darunter den (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-010053 — Referenzdesign für energieeffiziente Optionen für Smart-Meter-Drahtlosmodule mit Einwegbatterien<

Dieses Referenzdesign zeigt drei verschiedene Stromversorgungsarchitekturen für intelligente Durchflussmesser mit Lithium-Mangandioxid (LiMnO2)-Primärbatterien und handelsüblichen Schmalbandmodulen für Anwendungen im Zusammenhang mit dem Internet der Dinge (IoT). Die drei Stromversorgungslösungen (...)
Design guide: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
DSBGA (YBG) 6 Ultra Librarian
HVSSOP (DGR) 8 Ultra Librarian
VSON-HR (DLC) 8 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos