Inicio Conectividad inalámbrica Productos Wi-Fi
Inicio
Conectividad inalámbrica
Productos Wi-Fi

CC3200MOD

ACTIVO

Módulo inalámbrico SimpleLink™ Arm Cortex-M4 de 32 bits Wi-Fi® y dispositivos del Internet de las co

Haga su pedido ahora
Hoja de datos
Guías de usuario

CC3200MOD

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Processor Arm® Cortex®-M4 Type Module, Wireless MCU Technology Wi-Fi Protocols Wi-Fi 2.4 GHz Operating system FreeRTOS, TI RTOS Certifications CE, FCC, ISED, MIC, SRRC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 16 Features 1 STA, 2 secure sockets, 802.11bgn, IPv4 Security Cryptographic acceleration Rating Catalog Operating temperature range (°C) -20 to 70 Cryptographic accelerators AES, MD5, SHA-2
Processor Arm® Cortex®-M4 Type Module, Wireless MCU Technology Wi-Fi Protocols Wi-Fi 2.4 GHz Operating system FreeRTOS, TI RTOS Certifications CE, FCC, ISED, MIC, SRRC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 16 Features 1 STA, 2 secure sockets, 802.11bgn, IPv4 Security Cryptographic acceleration Rating Catalog Operating temperature range (°C) -20 to 70 Cryptographic accelerators AES, MD5, SHA-2
QFM (MOB) 63 358.75 mm² 20.5 x 17.5
  • CC3200MOD is a Wi-Fi module consisting of CC3200R1M2RGC single-chip wireless microcontroller (MCU)
  • Fully integrated module includes all required clocks, SPI Flash, and passives
  • Modular FCC, IC, TELEC, and CE certifications save customer effort, time, and money
  • Wi-Fi Alliance members can request certificate transfer of Wi-Fi CERTIFIED™ modules
  • 1.27-mm pitch QFM package for easy assembly and low-cost PCB design
  • Applications MCU subsystem:
    • Arm® Cortex®-M4 core at 80 MHz
    • Embedded memory:
      • Integrated serial Flash
      • RAM (up to 256KB)
      • Peripheral drivers in ROM
    • Hardware crypto engine for advanced hardware security including:
      • AES, DES, and 3DES
      • SHA and MD5
      • CRC and Checksum
    • 8-Bit parallel camera
    • One Multichannel Audio Serial Port (McASP) interface with support for I2S format
    • One SD (MMC) interface
    • 32-channel Micro Direct Memory Access (µDMA)
    • Two Universal Asynchronous Receivers and Transmitters (UARTs)
    • Two Serial Peripheral Interfaces (SPIs)
    • One Inter-integrated Circuit (I2C)
    • Four General-Purpose Timers (GPTs)
    • 16-Bit Pulse-Width Modulation (PWM) mode
    • One Watchdog Timer Module
    • 4-channel, 12-bit Analog-to-Digital Converters (ADCs)
    • Up to 25 individually programmable GPIO pins
  • Wi-Fi network processor subsystem:
    • 802.11 b/g/n radio, baseband, and medium access control
    • TCP/IP Stack
      • Eight simultaneous TCP, UDP, or RAW sockets
      • Two simultaneous TLS v1.2 or SSL 3.0 sockets
    • ARP, ICMP, DHCP, DNS, and mDNS support
    • HTTP server with built-in programmable HTML page for over-the-network device configuration
    • Powerful crypto engine for fast, secured WLAN connections with 256-bit encryption
    • Station, Access Point, and Wi-Fi Direct Modes
    • WPA2 personal and enterprise security
    • SimpleLink™ connection manager for managing Wi-Fi security states
    • TX power:
      • 17.0 dBm at 1 DSSS
      • 17.25 dBm at 11 CCK
      • 13.5 dBm at 54 OFDM
    • RX sensitivity:
      • –94.7 dBm at 1 DSSS
      • –87.0 dBm at 11 CCK
      • –73.0 dBm at 54 OFDM
    • Application Throughput:
      • UDP: 16 Mbps
      • TCP: 13 Mbps
  • Power-management subsystem:
    • Integrated DC/DC converter with a wide-supply voltage:
      • VBAT: 2.3 to 3.6 V
    • Low-power consumption At 3.6 V:
      • Hibernate with Real-Time Clock (RTC): 7 µA
      • Low-Power Deep Sleep: <275 µA
      • RX Traffic: 59 mA at 54 OFDM
      • TX Traffic: 229 mA at 54 OFDM
    • Package and operating conditions:
      • 1.27-mm pitch, 63-Pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
      • Operating temperature range: –20°C to +70°C
  • Additional integrated components:
    • 40.0-MHz crystal
    • 32.768-kHz crystal (RTC)
    • 8-Mbit SPI Serial Flash
    • RF filter and passive components
  • QFM package:
    • 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
  • Operating temperature:
    • Ambient temperature range: –40°C to +85°C
  • Module supports SimpleLink Developer’s Ecosystem
  • CC3200MOD is a Wi-Fi module consisting of CC3200R1M2RGC single-chip wireless microcontroller (MCU)
  • Fully integrated module includes all required clocks, SPI Flash, and passives
  • Modular FCC, IC, TELEC, and CE certifications save customer effort, time, and money
  • Wi-Fi Alliance members can request certificate transfer of Wi-Fi CERTIFIED™ modules
  • 1.27-mm pitch QFM package for easy assembly and low-cost PCB design
  • Applications MCU subsystem:
    • Arm® Cortex®-M4 core at 80 MHz
    • Embedded memory:
      • Integrated serial Flash
      • RAM (up to 256KB)
      • Peripheral drivers in ROM
    • Hardware crypto engine for advanced hardware security including:
      • AES, DES, and 3DES
      • SHA and MD5
      • CRC and Checksum
    • 8-Bit parallel camera
    • One Multichannel Audio Serial Port (McASP) interface with support for I2S format
    • One SD (MMC) interface
    • 32-channel Micro Direct Memory Access (µDMA)
    • Two Universal Asynchronous Receivers and Transmitters (UARTs)
    • Two Serial Peripheral Interfaces (SPIs)
    • One Inter-integrated Circuit (I2C)
    • Four General-Purpose Timers (GPTs)
    • 16-Bit Pulse-Width Modulation (PWM) mode
    • One Watchdog Timer Module
    • 4-channel, 12-bit Analog-to-Digital Converters (ADCs)
    • Up to 25 individually programmable GPIO pins
  • Wi-Fi network processor subsystem:
    • 802.11 b/g/n radio, baseband, and medium access control
    • TCP/IP Stack
      • Eight simultaneous TCP, UDP, or RAW sockets
      • Two simultaneous TLS v1.2 or SSL 3.0 sockets
    • ARP, ICMP, DHCP, DNS, and mDNS support
    • HTTP server with built-in programmable HTML page for over-the-network device configuration
    • Powerful crypto engine for fast, secured WLAN connections with 256-bit encryption
    • Station, Access Point, and Wi-Fi Direct Modes
    • WPA2 personal and enterprise security
    • SimpleLink™ connection manager for managing Wi-Fi security states
    • TX power:
      • 17.0 dBm at 1 DSSS
      • 17.25 dBm at 11 CCK
      • 13.5 dBm at 54 OFDM
    • RX sensitivity:
      • –94.7 dBm at 1 DSSS
      • –87.0 dBm at 11 CCK
      • –73.0 dBm at 54 OFDM
    • Application Throughput:
      • UDP: 16 Mbps
      • TCP: 13 Mbps
  • Power-management subsystem:
    • Integrated DC/DC converter with a wide-supply voltage:
      • VBAT: 2.3 to 3.6 V
    • Low-power consumption At 3.6 V:
      • Hibernate with Real-Time Clock (RTC): 7 µA
      • Low-Power Deep Sleep: <275 µA
      • RX Traffic: 59 mA at 54 OFDM
      • TX Traffic: 229 mA at 54 OFDM
    • Package and operating conditions:
      • 1.27-mm pitch, 63-Pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
      • Operating temperature range: –20°C to +70°C
  • Additional integrated components:
    • 40.0-MHz crystal
    • 32.768-kHz crystal (RTC)
    • 8-Mbit SPI Serial Flash
    • RF filter and passive components
  • QFM package:
    • 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
  • Operating temperature:
    • Ambient temperature range: –40°C to +85°C
  • Module supports SimpleLink Developer’s Ecosystem

Start your design with the industry’s first programmable FCC, IC, CE, and Wi-Fi CERTIFIED™ wireless MCU module with built-in Wi-Fi® connectivity. Created for the IoT, the SimpleLink™ CC3200MOD is a wireless MCU module that integrates an Arm® Cortex®-M4 MCU, allowing customers to develop an entire application with one device. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. The CC3200MOD integrates all required system-level hardware components including clocks, SPI Flash, RF switch, and passives into an QFM package for easy assembly and low-cost PCB design. The CC3200MOD is provided as a complete platform solution including software, sample applications, tools, user and programming guides, reference designs, and the TI E2E™ support community.

The applications MCU subsystem contains an industry-standard Arm® Cortex®-M4 core running at 80 MHz.

The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC. The CC3200 family includes flexible embedded RAM for code and data; ROM with external serial Flash bootloader and peripheral drivers; and SPI Flash for Wi-Fi network processor service packs, Wi-Fi certificates, and credentials.

The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a chip™ and contains an additional dedicated Arm® MCU that completely off-loads the applications MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3200MOD supports station, access point, and Wi-Fi Direct modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. The Wi-Fi Internet-on-a-chip includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The power-management subsystem includes integrated DC/DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7 µA of current.

Start your design with the industry’s first programmable FCC, IC, CE, and Wi-Fi CERTIFIED™ wireless MCU module with built-in Wi-Fi® connectivity. Created for the IoT, the SimpleLink™ CC3200MOD is a wireless MCU module that integrates an Arm® Cortex®-M4 MCU, allowing customers to develop an entire application with one device. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. The CC3200MOD integrates all required system-level hardware components including clocks, SPI Flash, RF switch, and passives into an QFM package for easy assembly and low-cost PCB design. The CC3200MOD is provided as a complete platform solution including software, sample applications, tools, user and programming guides, reference designs, and the TI E2E™ support community.

The applications MCU subsystem contains an industry-standard Arm® Cortex®-M4 core running at 80 MHz.

The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC. The CC3200 family includes flexible embedded RAM for code and data; ROM with external serial Flash bootloader and peripheral drivers; and SPI Flash for Wi-Fi network processor service packs, Wi-Fi certificates, and credentials.

The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a chip™ and contains an additional dedicated Arm® MCU that completely off-loads the applications MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3200MOD supports station, access point, and Wi-Fi Direct modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. The Wi-Fi Internet-on-a-chip includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The power-management subsystem includes integrated DC/DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7 µA of current.
filter Buscar otro/a Productos Wi-Fi
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
CC3220MOD ACTIVO Módulo inalámbrico para SimpleLink™ Arm Cortex-M4 de 32 bits Wi-Fi® This module supports the 2.4GHz band with additional security features and lower power.
Funcionalidad similar a la del dispositivo comparado
CC3235MODSF ACTIVO Módulo inalámbrico de doble banda para SimpleLink™ Arm Cortex-M4 de 32 bits Wi-Fi®con flash de 1 MB This module supports dual-band 2.4 GHz and 5 GHz Wi-Fi with enhanced security features & 1MB XIP Flash.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 31
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet CC3200MOD SimpleLink™ Certified Microcontroller and Wi-Fi® Network Processor Mod datasheet (Rev. C) 22 sep 2020
* User guide CC3200 SimpleLink Wi-Fi Wireless MCU Technical Reference Manual (Rev. D) 09 may 2018
* Radiation & reliability report CC3200MOD Reliability Data - Reliability Estimate 27 jul 2017
Application note CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices (Rev. A) PDF | HTML 20 oct 2022
Cybersecurity advisory TI-PSIRT-2021-100117 Integrated HTTP Server Ping Utility Vulnerability PDF | HTML 15 ene 2022
Certificate CC3200MODR1M2AMOB EC Declaration of Conformity (DoC) (Rev. A) 03 mar 2021
User guide CC3100/CC3200 SimpleLink Wi-Fi Internet-on-a-Chip User's Guide (Rev. C) PDF | HTML 16 dic 2020
Application note SimpleLink™ Wi-Fi® Enabled Electronic Smart Lock (Rev. A) 29 sep 2020
Application note CE Compliance Test Procedure for TI’s WiFi Devices PDF | HTML 19 ago 2020
Certificate Product Information for CC3xxx Devices as Per Annex-E of EN 300 328 10 ago 2020
Application note CC3x00 Power Management Optimization and Measures (Rev. A) PDF | HTML 02 jun 2020
Application note Transfer of TI Wi-Fi® Alliance Certifications to Products Using WFA Cert Policy (Rev. F) PDF | HTML 30 ene 2020
User guide SimpleLink™ Wi-Fi® CC3100, CC3200 UniFlash User's Guide PDF | HTML 15 ene 2020
Application note CC3x00 Production Line Guide 22 oct 2019
White paper Low-Power Internet Connectivity Over Wi-Fi (Rev. A) 23 may 2019
White paper A primer to Wi-Fi® provisioning for IoT applications (Rev. A) 31 ene 2019
User guide CC3200MOD SimpleLink Wi-Fi and IoT Solution With MCU-Module LaunchPad User Guide (Rev. A) 27 ago 2018
Product overview IP smart door locks: Power optimized and added security features for cloud conne (Rev. B) 26 jun 2018
User guide CC3200 SimpleLink Wi-Fi and IoT Solution w/ MCU LaunchPad Getting Started Guide (Rev. E) 09 may 2018
Product overview Design a low power camera with optimized cloud streaming and enhanced security u (Rev. A) 24 abr 2018
Product overview Design a video doorbell with optimized cloud streaming and enhanced security fea (Rev. A) 24 abr 2018
White paper Wireless Connectivity For The Internet of Things, One Size Does Not Fit All (Rev. A) 16 oct 2017
More literature Streamline the challenges of RF design with certified wireless modules 25 ene 2017
Technical article Part 1: Bringing the internet to a single chip PDF | HTML 18 nov 2016
More literature TI SimpleLink™ Wi-Fi® Family - Internet-on-a-chip solutions (Rev. C) 07 sep 2016
User guide TI-RTOS 2.16 for CC32xx SimpleLink Wireless MCUs Getting Started Guide (Rev. F) 22 feb 2016
Technical article Understanding wireless connectivity in industrial IoT applications PDF | HTML 04 ago 2015
E-book Understanding Wireless Connectivity in the Industrial IoT 22 jul 2015
User guide Antenna Board User's Guide 07 ago 2014
White paper A link to the Internet of Things IoT Made Easy With SimpleLink Wi-Fi Solutions 31 jul 2014
Application note CC31xx/CC32xx SimpleLink™ Wi-Fi® and IoT Power Management App Report 28 jul 2014

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

CC3200AUDBOOST — BoosterPack de audio para SimpleLink Wi-Fi CC3200

The SimpleLink™ Wi-Fi® CC3200 Audio BoosterPack enables the evaluation and development with the digital audio peripheral [I2S] present on the SimpleLink™ Wi-Fi® CC3200 device. It contains a Class-D power amplifier to drive speakers and an ultra-low power audio codec, TLV320AIC3254, supporting (...)

Guía del usuario: PDF
No disponible en TI.com
Sonda de depuración

LB-3P-TRACE32-WIRELESS — Sistema de depuración Lauterbach TRACE32 para conectividad inalámbrica

Lauterbach‘s TRACE32® tools are a suite of leading-edge hardware and software components that enables developers to analyze, optimize and certify many of TI's Wireless Connectivity chips. The globally renowned debug solutions for embedded systems are the perfect solution for all development phases (...)

Desde: Lauterbach GmbH
View Options
Kit de desarrollo de software (SDK)

CC3200SDK — CC3200 Software Development Kit (SDK), Service Pack, and Add-Ons

The SimpleLink™ Wi-Fi® CC3200 SDK contains drivers for the CC3200 programmable MCU, 40+ sample applications, and documentation needed to use the solution. It also contains the flash programmer, a command line tool for flashing software, configuring network and software parameters (SSID, (...)

Productos y hardware compatibles

Productos y hardware compatibles
Opciones de descarga
IDE, configuración, compilador o depurador

CC3XXXRADIOTEST — Herramienta de comprobación de radio Wi-Fi® SimpleLink™

La herramienta de prueba de radio SimpleLink™ Wi-Fi® es una herramienta de software basada en Windows para la evaluación y prueba de RF de los diseños SimpleLink Wi-Fi CC31xx y CC32xx durante el desarrollo y la certificación.  La herramienta brinda capacidades de prueba de radio de bajo nivel (...)
View Options
IDE, configuración, compilador o depurador

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
IDE, configuración, compilador o depurador

SYSCONFIG — Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
Capacitación en línea

SIMPLELINK-ACADEMY-CC32XX — SimpleLink™ Academy for CC32xx

SimpleLink Academy delivers easy-to-use training modules that span a wide range of topics for the SimpleLink Wi-Fi® evaluation platforms and software.
Productos y hardware compatibles

Productos y hardware compatibles
Examinar
Herramienta de programación de software

EMBEDDED-PROGRAMMING — Programación integrada Wi-Fi® SimpleLink™

Cada producto que tenga un dispositivo CC3120/CC3220 integrado también debe tener conectado un dispositivo flash serie. El flash serie debe estar formateado y, como mínimo, programado con el Service Pack que contiene las actualizaciones de software necesarias y funciones adicionales. En el caso de (...)
Guía del usuario: PDF | HTML
View Options
Herramienta de programación de software

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
Certificación

CC3100MOD-DESIGN-FILES — CC3100MOD Design Information for Regulatory Compliance

Are you looking for CC3XXX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of CC31XX, CC32XX, and CC33XX products. Within this page you will find the latest certification reports of our Modules as well as our (...)

Productos y hardware compatibles

Productos y hardware compatibles
Solicitar
Certificación

CC3220MODA-DESIGN-FILES — CC3220MODA Design Information for Regulatory Compliance

Are you looking for CC3XXX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of CC31XX, CC32XX, and CC33XX products. Within this page you will find the latest certification reports of our Modules as well as our (...)

Productos y hardware compatibles

Productos y hardware compatibles
Solicitar
Certificación

SIMPLELINK-CC32XX-REPORTS — Reports: CC32xx Regulatory Certification

Are you looking for CC3XXX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of CC31XX, CC32XX, and CC33XX products. Within this page you will find the latest certification reports of our Modules as well as our (...)

Productos y hardware compatibles

Productos y hardware compatibles
Solicitar
Certificación

SIMPLELINK-CC3XXX-CERTIFICATION — Certificación de radio para CC3XXX SimpleLink™

¿Está buscando soporte para la certificación de CC3XXX? SIMPLELINK-CC3XXX-CERTIFCATION proporciona la información pertinente y el soporte necesario para la certificación exitosa de sus productos CC31XX, CC32XX, y CC33XX . En esta página encontrará los informes de certificación más recientes de (...)
View Options
Herramienta de diseño

SIMPLELINK-WIFI-DESIGN-REVIEWS — Revisiones de diseño de hardware para dispositivos SimpleLink™ Wi-Fi

Este proceso de revisión del diseño de hardware Wi-Fi CC3XXX le ofrece la posibilidad de ponerse en contacto, de forma personalizada, con un experto en la materia que puede revisar su diseño y proporcionarle valiosos comentarios.  Antes de solicitar una revisión, asegúrese de consultar la (...)
Guía del usuario: PDF
View Options
Herramienta de diseño

SWRR177 — CC3x00 Design Checklist

The CC3XXX Wi-Fi hardware design review process provides a way to get in touch, one-on-one, with a subject matter expert that can help review your design and provide valuable feedback.  Before requesting a review, it is important to review the technical documentation and design & (...)

Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Archivo Gerber

CC3200MOD SimpleLink MCU & Wi-Fi Network Processor Module-LaunchPad Design Files

SWRC294.ZIP (3477 KB)
Descargar
Diseños de referencia

TIDA-00485 — Diseño de referencia de puente RS-485 a Wi-Fi no aislado con alimentación de 24 VCA

TIDA-00485 uses our SimpleLink Wi-Fi CC3200 Internet-on-a-chip wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi® network. The SN65HVD72 transceiver provides the RS-485 interface with 12 kV of ESD protection and additional protection is provided on board. (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00486 — Diseño de referencia de puente RS-485 a Wi-Fi aislado con alimentación de 24 VCA

TIDA-00486 uses our SimpleLink Wi-Fi® CC3200 Internet-on-a-chip wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi network. The ISO15 transceiver provides an isolated RS-485 interface with up to 2500 VRMS of isolation. The LM5160 Fly-Buck™ power supply (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00375 — Diseño de referencia de puente UART a Wi-Fi con alimentación de 24 VCA

This reference design uses our SimpleLink Wi-Fi CC3200 internet-on-a-chip wireless MCU module to create a data bridge between existing hardware with a logic-level UART interface and a Wi-Fi network. The design also contains a simple switcher power supply with a wide-input range suitable (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDC-CC3200-VIDEO — Diseño de referencia de transmisión de video/audio SimpleLink™ CC32xx-OV788 a través de Wi-Fi

El diseño permite a los usuarios del chip de compresión de vídeo de potencia ultrabaja OV788 ofrecer capacidades de transmisión en directo de datos de audio y vídeo a través de Wi-Fi® con gran facilidad. Muestra una implementación de un solo chip de transmisión de vídeo RTP + conexión Wi-Fi en el (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDC-CC3200MODLAUNCHXL — LaunchPad del módulo CC3200 de Wi-Fi® SimpleLink™

The CC3200MODLAUNCHXL is a low-cost evaluation platform which hosts the CC3200MOD. The SimpleLink™ CC3200MOD is a wireless microcontroller (MCU) module that integrates an ARM® Cortex™-M4 based MCU, allowing customers to develop an entire application using a single device. The module (...)
Guía del usuario: PDF
Esquema: PDF
Diseños de referencia

TIDC-SMARTPLUG-WIFI — Conexión inteligente con desconexión remota y conectividad Wi-Fi

Este diseño implementa la medición de energía de salida única con capacidad de conexión/desconexión remota y conectividad Wi-Fi. Los diseñadores pueden crear rápidamente dispositivos de control de carga en red para aplicaciones de edificios industriales y domótica.
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDC-CC3ANTENNA-SELECTION — Selección de antena Wi-Fi SimpleLink

The SimpleLink™ Wi-Fi® Antenna BoosterPack (CC3ANTENNABOOST) enables evaluation and development of end applications requiring antenna diversity. When used with the SimpleLink Wi-Fi CC3200 Launchpad (CC3200-LAUNCHXL) or the CC3100 Boosterpack (CC3100BOOST) rev 3.1 or higher, the user can select the (...)
Esquema: PDF
Diseños de referencia

TIDC-CC3200AUDBOOST — Aplicación de transmisión de audio por Wi-Fi para LaunchPad SimpleLink Wi-Fi CC3200

This SimpleLink Wi-Fi CC3200 LaunchPad and Audio BoosterPack design brings Wi-Fi audio streaming capability to new applications as well as existing ones such as HD digital speakers. It enables the capture, streaming and playback of audio from a digital microphone or a stereo/mono audio jack to (...)
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
QFM (MOB) 63 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos