Inicio Amplificadores Amplificadores diferenciales
Inicio
Amplificadores
Amplificadores diferenciales

LM9044

OBSOLETO

Amplificador de interfaz de sensor Lambda

Haga su pedido ahora
Hoja de datos
LM9044 ya no está en producción
Este producto ya no está en producción. Los nuevos diseños deben considerar un producto alternativo.
open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
INA592 ACTIVO Amplificador diferencial e-trim™ de alta precisión (offset de 40 µV), 2 MHz, CMRR de 88 dB y baja po Upgrade in diff amp performance and smaller package options

LM9044

OBSOLETO
Hoja de datos Haga su pedido ahora

Detalles del producto

Vs (min) (V) 9 Vs (max) (V) 16 Rating Catalog Operating temperature range (°C) -40 to 125
Vs (min) (V) 9 Vs (max) (V) 16 Rating Catalog Operating temperature range (°C) -40 to 125
PLCC (FN) 20 98.01 mm² (9.9 mm × 9.9 mm)
  • Normal Circuit Operation Specified with Inputs up to 3V Below Ground on a Single Supply.
  • Gain Factory Trimmed and Specified over Temperature (±3% of Full-scale from −40°C to +125°C)
  • Low Power Consumption (Typically 1 mA)
  • Fully Protected Inputs
  • Input Open Circuit Detection
  • Operation Specified over the Entire Automotive Temperature Range (−40°C to +125°C)

All trademarks are the property of their respective owners.

  • Normal Circuit Operation Specified with Inputs up to 3V Below Ground on a Single Supply.
  • Gain Factory Trimmed and Specified over Temperature (±3% of Full-scale from −40°C to +125°C)
  • Low Power Consumption (Typically 1 mA)
  • Fully Protected Inputs
  • Input Open Circuit Detection
  • Operation Specified over the Entire Automotive Temperature Range (−40°C to +125°C)

All trademarks are the property of their respective owners.

The LM9044 is a precision differential amplifier specifically designed for operation in the automotive environment. Gain accuracy is specified over the entire automotive temperature range (−40°C to +125°C) and is factory trimmed after package assembly. The input circuitry has been specifically designed to reject common-mode signals as much as 3V below ground without the need for a negative voltage supply. This facilitates the use of sensors which are grounded at the engine block while the LM9044 itself is grounded at chassis potential. An external capacitor on the RF pin sets the maximum operating frequency of the amplifier, thereby filtering high frequency transients. Both inputs are protected against accidental shorting to the battery and against load dump transients. The input impedance is typically 1.2 MΩ.

The output op amp is capable of driving capacitive loads and is fully protected. Also, internal circuitry has been provided to detect open circuit conditions on either or both inputs and force the output to a “home” position (a ratio of the external reference voltage).

The LM9044 is a precision differential amplifier specifically designed for operation in the automotive environment. Gain accuracy is specified over the entire automotive temperature range (−40°C to +125°C) and is factory trimmed after package assembly. The input circuitry has been specifically designed to reject common-mode signals as much as 3V below ground without the need for a negative voltage supply. This facilitates the use of sensors which are grounded at the engine block while the LM9044 itself is grounded at chassis potential. An external capacitor on the RF pin sets the maximum operating frequency of the amplifier, thereby filtering high frequency transients. Both inputs are protected against accidental shorting to the battery and against load dump transients. The input impedance is typically 1.2 MΩ.

The output op amp is capable of driving capacitive loads and is fully protected. Also, internal circuitry has been provided to detect open circuit conditions on either or both inputs and force the output to a “home” position (a ratio of the external reference voltage).
filter Buscar otro/a Amplificadores diferenciales
Descargar

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM9044 Lambda Sensor Interface Amplifier datasheet (Rev. D) 25/03/2013

Pedidos y calidad