The OPA690 device represents a major step forward in unity-gain stable, voltage-feedback op amps. A new input architecture provides slew rate and full-power bandwidth previously found only in wide-band, current-feedback op amps. A new output stage architecture delivers 215mA of current with a minimal headroom requirement. These capabilities combine to give exceptional slew rate of 1900V/µs into a 100Ω load. The ultra-fast settling time of 13ns makes the OPA690 an excellent choice for fast sampling systems such as high-speed ADC drivers, high-speed imaging systems, and current DAC transimpedance amplifier.
The low quiescent current of 6.1mA makes the OPA690 an excellent choice in portable or battery-powered application. System power can be reduced further using the optional disable control pin (DIS). Leaving DIS open, or holding DIS high, operates the OPA690 normally. If DIS is pulled low, the OPA690 supply current drops to less than 100µA while the output goes to a high-impedance state.
| Documentación principal | Tipo | Título | Opciones de formato | Fecha |
|---|---|---|---|---|
| * | Data sheet | OPA690 Wideband, Voltage-Feedback Operational Amplifier With Disable datasheet (Rev. H) | PDF | HTML | 04 oct 2024 |
| Application note | Input Voltage Effects on Slew Rate for Voltage and Current Feedback Amplifiers | PDF | HTML | 15 ene 2025 | |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 28 mar 2017 | ||
| Application note | RLC Filter Design for ADC Interface Applications (Rev. A) | 13 may 2015 | ||
| User guide | DEM-OPA-SO-1A User's Guide (Rev. B) | 12 abr 2012 | ||
| User guide | DEM-OPA-SOT-1A User's Guide (Rev. B) | 12 abr 2012 | ||
| Application note | A Numerical Solution to an Analog Problem | 25 abr 2010 | ||
| Application note | Noise Analysis for High Speed Op Amps (Rev. A) | 17 ene 2005 | ||
| Application note | ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers | 22 abr 2004 | ||
| Application note | Measuring Board Parasitics in High-Speed Analog Design | 07 jul 2003 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The DEM-OPA-SO-1A demonstration fixture helps designers evaluate the operation and performance of TI's High Speed, Wide Bandwidth Operational Amplifiers. This unpopulated PC board is compatible with products offered in the 8-lead SOIC (D) package.
El DEM-OPA-SOT-1A es una tarjeta de demostración que evalúa el funcionamiento y las prestaciones de los amplificadores operacionales de alta velocidad y gran ancho de banda. Esta placa de circuito impreso sin poblar es compatible con los productos ofrecidos en el encapsulado DBV de transistor de (...)
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| SOT-23 (DBV) | 6 | Ultra Librarian |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI.
Analog Engineer's Calc Installer
General calculator tool for analog design support.