Inicio Administración de potencia Supervisor & reset ICs Supervisores de tensión de suministro
Inicio
Administración de potencia
Supervisor & reset ICs
Supervisores de tensión de suministro
NUEVO

TPS37100

ACTIVO

Supervisor de ventana de 105 V con corriente quiescente baja (Iq) y tiempo de respuesta rápido

Haga su pedido ahora
Hoja de datos

TPS37100

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Automotive Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 0.8, Adjustable Features Analog output, Detection time delay, Reset time delay, Reverse polarity protection, Separate VDD & sense, Undervoltage and overvoltage monitor, Wide input voltage Reset threshold accuracy (%) 1.3 Iq (typ) (mA) 0.005 Output driver type/reset output Active-low, Open-drain Time delay (ms) 0.01 Watchdog timer WDI (s) None Supply voltage (min) (V) 3 Supply voltage (max) (V) 105 Operating temperature range (°C) -40 to 125
Rating Automotive Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 0.8, Adjustable Features Analog output, Detection time delay, Reset time delay, Reverse polarity protection, Separate VDD & sense, Undervoltage and overvoltage monitor, Wide input voltage Reset threshold accuracy (%) 1.3 Iq (typ) (mA) 0.005 Output driver type/reset output Active-low, Open-drain Time delay (ms) 0.01 Watchdog timer WDI (s) None Supply voltage (min) (V) 3 Supply voltage (max) (V) 105 Operating temperature range (°C) -40 to 125
SOT-23-THN (DYY) 14 13.692 mm² 4.2 x 3.26
  • SIL 3 Functional Safety-Compliant (Targeted for TPS37102)
    • Documentation to aid IEC 61508 system design
    • Systematic capability up to SIL 3 targeted
    • Hardware capability up to SIL 3 targeted
  • Functional Safety-Capable (TPS37100)
    • Documentation available to aid functional safety system design
  • Wide supply voltage range: 3V to 105V
  • Low quiescent current: 5µA
  • High threshold accuracy: 1.1% (maximum)
  • -95V reverse polarity protection on SENSE
  • 5µs fast UV/OV monitor for 24V/48V systems
  • Integrated buffer (AOUT) for supply voltage measurement with enable pin
  • Fixed and programmable release time delay
  • Fixed and programmable sense time delay
  • Open-drain, active-low output: OUT A and OUT B
  • BIST and Latch available for TPS37102
  • SIL 3 Functional Safety-Compliant (Targeted for TPS37102)
    • Documentation to aid IEC 61508 system design
    • Systematic capability up to SIL 3 targeted
    • Hardware capability up to SIL 3 targeted
  • Functional Safety-Capable (TPS37100)
    • Documentation available to aid functional safety system design
  • Wide supply voltage range: 3V to 105V
  • Low quiescent current: 5µA
  • High threshold accuracy: 1.1% (maximum)
  • -95V reverse polarity protection on SENSE
  • 5µs fast UV/OV monitor for 24V/48V systems
  • Integrated buffer (AOUT) for supply voltage measurement with enable pin
  • Fixed and programmable release time delay
  • Fixed and programmable sense time delay
  • Open-drain, active-low output: OUT A and OUT B
  • BIST and Latch available for TPS37102

The TPS37100 and TPS37102 are 105V input voltage supervisors with low quiescent current (5uA), fast detection time, and an integrated buffer for supply voltage measurements. This family of devices can be connected directly to voltages or battery rails up to 105V for continuous monitoring of over (OV) or under (UV) voltage conditions. Wide hysteresis voltage options are available to ignore false output deassertions that are be caused by battery voltage transients.

The TPS37100 and TPS37102 include two outputs (OUT A and OUT B) that are used as separate OV and UV fault monitors enabling system to take different action based on the fault that occurs. Additionally, the AOUT pin provides a scaled down SENSE pin voltage output and is intended to be sampled by ADC for supply voltage measurements. The user can choose the scaling factor desired based on the orderable part selected. The TPS37102 comes with BIST which is implemented at start-up to verify device health as well as an optional latching feature on OUT A to help the system bring into a safe state when critical faults occurs.

The TPS37100 and TPS37102 are 105V input voltage supervisors with low quiescent current (5uA), fast detection time, and an integrated buffer for supply voltage measurements. This family of devices can be connected directly to voltages or battery rails up to 105V for continuous monitoring of over (OV) or under (UV) voltage conditions. Wide hysteresis voltage options are available to ignore false output deassertions that are be caused by battery voltage transients.

The TPS37100 and TPS37102 include two outputs (OUT A and OUT B) that are used as separate OV and UV fault monitors enabling system to take different action based on the fault that occurs. Additionally, the AOUT pin provides a scaled down SENSE pin voltage output and is intended to be sampled by ADC for supply voltage measurements. The user can choose the scaling factor desired based on the orderable part selected. The TPS37102 comes with BIST which is implemented at start-up to verify device health as well as an optional latching feature on OUT A to help the system bring into a safe state when critical faults occurs.
filter Buscar otro/a Supervisores de tensión de suministro
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet TPS37100, TPS37102 105V, 5μA, Window, Overvoltage, or Undervoltage Supervisor with Integrated Buffer for Supply Voltage Measurements datasheet (Rev. A) PDF | HTML 25 sep 2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS3710XEVM — Módulo de evaluación TPS3710X

El TPS3710XEVM es un módulo de evaluación (EVM) para los supervisores de tensión de la familia TPS3710x-Q1. El propósito de este EVM es brindar un diseño de muestra y un punto de prueba para todos los pines de entrada y salida para probar la funcionalidad de los dispositivos TPS3700-Q1 y (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23-THN (DYY) 14 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos