Inicio Administración de potencia Controladores e interruptores de lado alto Interruptores de lado alto
Inicio
Administración de potencia
Controladores e interruptores de lado alto
Interruptores de lado alto
NUEVO

TPS482H85-Q1

ACTIVO

Interruptor automotriz de lado alto inteligente de canal doble y de 48 V, 85-mΩ

Haga su pedido ahora
Hoja de datos

TPS482H85-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 2 Rating Automotive Operating voltage (max) (V) 58 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 85 Imax (A) 2.2 Current limit (max) (A) 10.5 Current limit (min) (A) 0.8 Current limit type Adjustable FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out TI functional safety category Functional Safety-Capable Current limit accuracy +/- 15% @ 0.5A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
Number of channels 2 Rating Automotive Operating voltage (max) (V) 58 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 85 Imax (A) 2.2 Current limit (max) (A) 10.5 Current limit (min) (A) 0.8 Current limit type Adjustable FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out TI functional safety category Functional Safety-Capable Current limit accuracy +/- 15% @ 0.5A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
VQFN-HR (CHU) 12 10.5 mm² 3 x 3.5
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional safety capable
  • Dual-channel 85mΩ smart high-side switch with full diagnostics
  • Wide operating voltage: 6V to 58V
  • Ultra-low standby current, < 2µA per channel
  • High-accuracy current sense: < ±10% for > 50mA
  • Selectable current limit levels with external resistor
  • Protection features:
    • Short-to-GND protection by current limit
    • Absolute and relative thermal shutdown
    • Inductive Load negative voltage clamp with optimized slew rate
    • Loss-of-ground, loss-of-battery, and reverse battery protection
  • Diagnostics features:
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
    • Accurate current sense
  • 3.5mm × 3mm small form factor 12-pin QFN package
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional safety capable
  • Dual-channel 85mΩ smart high-side switch with full diagnostics
  • Wide operating voltage: 6V to 58V
  • Ultra-low standby current, < 2µA per channel
  • High-accuracy current sense: < ±10% for > 50mA
  • Selectable current limit levels with external resistor
  • Protection features:
    • Short-to-GND protection by current limit
    • Absolute and relative thermal shutdown
    • Inductive Load negative voltage clamp with optimized slew rate
    • Loss-of-ground, loss-of-battery, and reverse battery protection
  • Diagnostics features:
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
    • Accurate current sense
  • 3.5mm × 3mm small form factor 12-pin QFN package

The TPS4H82H85-Q1 device is fully protected dual-channel smart high-side switch with two integrated 85mΩ NMOS power FETs, intended for 24V and 48V automotive systems. The low RON minimizes the device power dissipation when driving a wide range of output load current up to 2.2A when both channels are enabled or 3A when only one channel is enabled. Protection and diagnostic features include accurate current sense, selectable current limit levels, OFF-state open-load, short-to-battery detection, output clamp, and thermal shutdown.

The device provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance, without further calibration. The device also implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The TPS4H82H85-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.

The TPS4H82H85-Q1 device is fully protected dual-channel smart high-side switch with two integrated 85mΩ NMOS power FETs, intended for 24V and 48V automotive systems. The low RON minimizes the device power dissipation when driving a wide range of output load current up to 2.2A when both channels are enabled or 3A when only one channel is enabled. Protection and diagnostic features include accurate current sense, selectable current limit levels, OFF-state open-load, short-to-battery detection, output clamp, and thermal shutdown.

The device provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance, without further calibration. The device also implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The TPS4H82H85-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.
filter Buscar otro/a Interruptores de lado alto
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS1HTC100-Q1 ACTIVO Interruptor automotriz de lado alto inteligente monocanal de 60 V, 4 A y 83 mΩ con límite de corr Single channel switch suited for 48V systems

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TPS482H85-Q1: 48V, 85mΩ Automotive Dual-Channel Smart High-Side Switch datasheet (Rev. A) PDF | HTML 09 oct 2025
Functional safety information TPS482H85-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 17 sep 2025
Application note Charging Capacitive Loads with Smart High-Side Switches PDF | HTML 12 sep 2025
Certificate TPS482H85EVM EU Declaration of Conformity (DoC) 24 feb 2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS482H85EVM — Módulo de evaluación TPS482H85EVM para interruptor de lado alto de 48 V TPS482H85-Q1

El TPS482H85EVM es un módulo de evaluación (EVM) de hardware que se utiliza para permitir a los ingenieros de hardware evaluar el rendimiento y la funcionalidad completos del interruptor para automoción de lado alto TPS482H85-Q1. Este módulo de evaluación (EVM) proporciona una manera sencilla de (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Diseños de referencia

TIDA-020094 — 48V zone reference design

This reference design demonstrates trends in advanced automotive 48V low voltage rail architectures. The design includes the 48V backbone architecture and 48V to 12V power conversion. The reference design highlights 48V load drivers across key products. These products include high side switches (...)
Design guide: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN-HR (CHU) 12 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos