Inicio Administración de potencia Reguladores de conmutación CA/CC Controladores de CA/CC

UC1856-SP

ACTIVO

Controlador PWM de 1 MHz, QML-V, entrada de 40 V y doble salida de 1.5 A

Detalles del producto

Topology Boost, Flyback, Forward, Full bridge, Half bridge, Push pull Control mode Current Features Error amplifier, Multi-topology, Soft start, Synchronization pin Duty cycle (max) (%) 50
Topology Boost, Flyback, Forward, Full bridge, Half bridge, Push pull Control mode Current Features Error amplifier, Multi-topology, Soft start, Synchronization pin Duty cycle (max) (%) 50
CDIP (J) 16 135.3552 mm² (— mm × — mm) CFP (HKT) 16 72.136 mm² (0 mm × 0 mm)
  • Pin-for-Pin Compatible With the UC1846
  • 65-ns Typical Delay From Shutdown to Outputs,
    and 50-ns Typical Delay From SYNC to Outputs
  • Improved Current-Sense Amplifier With
    Reduced Noise Sensitivity
  • Differential Current Sense with 3-V Common-Mode Range
  • Trimmed-Oscillator Discharge Current for Accurate
    Deadband Control
  • Accurate 1-V Shutdown Threshold
  • High-Current Dual Totem-Pole Outputs (1.5-A peak)
  • TTL Compatible Oscillator SYNC Pin Thresholds
  • 4-kV ESD Protection
  • Pin-for-Pin Compatible With the UC1846
  • 65-ns Typical Delay From Shutdown to Outputs,
    and 50-ns Typical Delay From SYNC to Outputs
  • Improved Current-Sense Amplifier With
    Reduced Noise Sensitivity
  • Differential Current Sense with 3-V Common-Mode Range
  • Trimmed-Oscillator Discharge Current for Accurate
    Deadband Control
  • Accurate 1-V Shutdown Threshold
  • High-Current Dual Totem-Pole Outputs (1.5-A peak)
  • TTL Compatible Oscillator SYNC Pin Thresholds
  • 4-kV ESD Protection

The UC1856 is a high-performance version of the popular UC1846 series of current-mode controllers, and is intended for both design upgrades and new applications where speed and accuracy are important. All input-to-output delays have been minimized, and the current sense output is slew-rate limited to reduce noise sensitivity. Fast 1.5-A peak output stages have been added to allow rapid switching of power FETs.

A low-impedance TTL-compatible sync output has been implemented with a TRI-STATE function when used as a sync input.

Internal-chip grounding has been improved to minimize internal noise caused when driving large capacitive loads. This improvement, in conjunction with the improved differential current-sense amplifier, results in enhanced noise immunity.

Other features include a trimmed oscillator current (8%) for accurate frequency and dead-time control; a 1-V 5% shutdown threshold; and 4-kV minimum electrostatic discharge (ESD) protection on all pins.

The UC1856 is a high-performance version of the popular UC1846 series of current-mode controllers, and is intended for both design upgrades and new applications where speed and accuracy are important. All input-to-output delays have been minimized, and the current sense output is slew-rate limited to reduce noise sensitivity. Fast 1.5-A peak output stages have been added to allow rapid switching of power FETs.

A low-impedance TTL-compatible sync output has been implemented with a TRI-STATE function when used as a sync input.

Internal-chip grounding has been improved to minimize internal noise caused when driving large capacitive loads. This improvement, in conjunction with the improved differential current-sense amplifier, results in enhanced noise immunity.

Other features include a trimmed oscillator current (8%) for accurate frequency and dead-time control; a 1-V 5% shutdown threshold; and 4-kV minimum electrostatic discharge (ESD) protection on all pins.

Descargar Ver vídeo con transcripción Video
Soporte de diseño limitado de TI disponible

Los proyectos existentes que utilizan este producto tienen un soporte de diseño limitado de TI. Si está disponible, encontrará material adicional, software y herramientas relevantes en la página del producto. Los diseños existentes que utilizan este producto tienen un soporte de diseño limitado de TI. Solicite asistencia limitada para diseño en los foros de asistencia TI E2E™.

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS7H5001-SP ACTIVO Controlador PWM, doble salida a 2 MHz, resistente a la radiación, rectif. síncrona, certif. QML-P y More feature rich QML-qualified radiation-hardened PWM controller family
TPS7H5005-SEP ACTIVO Controlador PWM de salida doble de 2 MHz, con tolerancia a la radiación y rectificación síncrona More feature rich radiation-tolerant PWM controller family for LEO or shorter duration missions

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos UC1856-SP Improved Current Mode PWM Controller datasheet 24/04/2014
* SMD UC1856-SP SMD 5962-94530 8/07/2016
Guía de selección TI Space Products (Rev. L) 27/03/2026
Nota sobre la aplicación Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form (Rev. A) PDF | HTML 5/11/2025
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 17/06/2025
Nota sobre la aplicación Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 10/06/2025
Más documentación TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 20/02/2025
Nota sobre la aplicación QML flow, its importance, and obtaining lot information (Rev. C) 30/08/2023
Nota sobre la aplicación Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 19/10/2022
Application brief Controlling Input Power for Present and Next-Generation Power Controllers PDF | HTML 14/12/2020
Nota sobre la aplicación DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 21/08/2020
Libro electrónico Radiation Handbook for Electronics (Rev. A) 21/05/2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
CDIP (J) 16 Ultra Librarian
CFP (HKT) 16 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos