Herramienta de cálculo
UCC27201
Controlador de puerta de medio puente de 3 A y 120 V con UVLO de 8 V y entradas TTL
Hoja de datos
UCC27201
- Drives Two N-Channel MOSFETs in High-Side
and Low-Side Configuration - Negative Voltage Handling on HS (–5 V)
- Maximum Boot Voltage of 120 V
- Maximum VDD Voltage of 20 V
- On-Chip 0.65-V VF, 0.6-Ω RD Bootstrap Diode
- Greater than 1 MHz of Operation
- 20-ns Propagation Delay Times
- 3-A Sink and 3-A Source Output Currents
- 8-ns Rise and 7-ns Fall Time With 1000-pF Load
- 1-ns Delay Matching
- Undervoltage Lockout for High-Side and Low-Side
Driver - Specified from –40°C to 140°C
The UCC2720x family of high-frequency N-channel MOSFET drivers include a 120-V bootstrap diode and high-side and low-side drivers with independent inputs for maximum control flexibility. This allows for N-channel MOSFET control in half-bridge, full-bridge, two-switch forward, and active clamp forward converters. The low-side and the high-side gate drivers are independently controlled and matched to 1 ns between the turnon and turnoff of each other.
An on-chip bootstrap diode eliminates the external discrete diodes. Undervoltage lockout is provided for both the high-side and the low-side drivers forcing the outputs low if the drive voltage is below the specified threshold.
Two versions of the UCC27200 are offered. The UCC27200 has high noise immune CMOS input thresholds while the UCC27201 has TTL compatible thresholds.
Productos similares que pueden interesarle
Pin por pin con la misma funcionalidad que el dispositivo comparado
Documentación técnica
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7 | Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | UCC2720x, 120-V Boot, 3-A Peak, High Frequency, High-Side and Low-Side Driver datasheet (Rev. C) | PDF | HTML | 28 abr 2016 |
| Application note | Understanding and comparing peak current capability of gate drivers | PDF | HTML | 30 mar 2021 | |
| More literature | Troubleshooting gate drive circuits in automotive and industrial applications | 23 mar 2021 | ||
| Application brief | External Gate Resistor Selection Guide (Rev. A) | 28 feb 2020 | ||
| Application brief | Understanding Peak IOH and IOL Currents (Rev. A) | 28 feb 2020 | ||
| More literature | Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) | 29 oct 2018 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 25 jun 2018 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Modelo de simulación
UCC27201 and UCC27201A PSpice Transient Model (Rev. B)
SLUM096B.ZIP (74 KB) - PSpice Model
Modelo de simulación
UCC27201 and UCC27201A TINA-TI Transient Reference Design (Rev. A)
SLUM114A.TSC (193 KB) - TINA-TI Reference Design
Modelo de simulación
UCC27201 and UCC27201A TINA-TI Transient Spice Model (Rev. A)
SLUM113A.ZIP (30 KB) - TINA-TI Spice Model
Modelo de simulación
UCC27201 and UCC27201A Unencrypted PSpice Transient Model
SLUM502.ZIP (4 KB) - PSpice Model
Diseños de referencia
TIDM-AUTO-DC-LED-LIGHTING — Múltiples canales de control LED de alta densidad para aplicaciones de faros para automoción
This design, featuring the TMS320F2803x Piccolo microcontroller, implements a high efficiency multi-channel DC-DC LED control system for typically automotive lighting systems. The design support up to 6 channels of LED controls each with maximum of 1.2A current driving capabilities. With a (...)
Diseños de referencia
PMP4333 — Fuente de alimentación CC/CC digital aislada de triple carril y 1 kW para telecomunicaciones (-8 V a
This reference design demostrates full-function 1.2KW triple-rail digital power supply solution for telecom application. The input range is 36-60Vin and outputs are two 48V10A(Full bridge) and one 5.5V30A(active clamp). Synchrounous rectifiers are used in the design and the overall efficiency is (...)
Test report: PDF
Diseños de referencia
PMP4320A — Diseño de referencia de convertidor CC/CC de medio ladrillo de 600 W con control digital para aplica
The PMP4320A reference design is a single output DC-DC converter with standard half-brick dimensions and full digital control configuration based on the UCD3138. It is capable of delivering 50A output current with an output voltage of 12V. The converter provides high efficiency and good (...)
Diseños de referencia
PMP8878 — Diseño de referencia de módulo de potencia CC/CC aislado de 1/8 ladrillo para telecomunicaciones
PMP8878 is a full-function 1/8th brick isolated DC/DC telecom power module based on UCC28250 advanced PWM controller. The reference design features secondary side control and hard switching full bridge power topology to deliver 12V/180W of output power operating across a wide range 40V-75V input (...)
| Paquete | Pasadores | Descargar |
|---|---|---|
| HSOIC (DDA) | 8 | Ver opciones |
| SOIC (D) | 8 | Ver opciones |
| VSON (DRM) | 8 | Ver opciones |
Pedidos y calidad
Información incluida:
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
Información incluida:
- Lugar de fabricación
- Lugar de ensamblaje
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.