AM3356
- Up to 1-GHz Sitara™
ARM®
Cortex®-A8 32‑Bit RISC
Processor
- NEON™ SIMD Coprocessor
- 32KB of L1 Instruction and 32KB of Data Cache With Single-Error Detection (Parity)
- 256KB of L2 Cache With Error Correcting Code (ECC)
- 176KB of On-Chip Boot ROM
- 64KB of Dedicated RAM
- Emulation and Debug - JTAG
- Interrupt Controller (up to 128 Interrupt Requests)
- On-Chip Memory (Shared L3
RAM)
- 64KB of General-Purpose On-Chip Memory Controller (OCMC) RAM
- Accessible to All Masters
- Supports Retention for Fast Wakeup
- External Memory Interfaces
(EMIF)
- mDDR(LPDDR), DDR2, DDR3, DDR3L
Controller:
- mDDR: 200-MHz Clock (400-MHz Data Rate)
- DDR2: 266-MHz Clock (532-MHz Data Rate)
- DDR3: 400-MHz Clock (800-MHz Data Rate)
- DDR3L: 400-MHz Clock (800-MHz Data Rate)
- 16-Bit Data Bus
- 1GB of Total Addressable Space
- Supports One x16 or Two x8 Memory Device Configurations
- General-Purpose Memory Controller
(GPMC)
- Flexible 8-Bit and 16-Bit Asynchronous Memory Interface With up to Seven Chip Selects (NAND, NOR, Muxed-NOR, SRAM)
- Uses BCH Code to Support 4-, 8-, or 16-Bit ECC
- Uses Hamming Code to Support 1-Bit ECC
- Error Locator Module (ELM)
- Used in Conjunction With the GPMC to Locate Addresses of Data Errors from Syndrome Polynomials Generated Using a BCH Algorithm
- Supports 4-, 8-, and 16-Bit per 512-Byte Block Error Location Based on BCH Algorithms
- mDDR(LPDDR), DDR2, DDR3, DDR3L
Controller:
- Programmable Real-Time Unit
Subsystem and Industrial Communication Subsystem (PRU-ICSS)
- Supports Protocols such as EtherCAT®, PROFIBUS, PROFINET, EtherNet/IP™, and More
- Two Programmable Real-Time Units
(PRUs)
- 32-Bit Load/Store RISC Processor Capable of Running at 200 MHz
- 8KB of Instruction RAM With Single-Error Detection (Parity)
- 8KB of Data RAM With Single-Error Detection (Parity)
- Single-Cycle 32-Bit Multiplier With 64-Bit Accumulator
- Enhanced GPIO Module Provides Shift-In/Out Support and Parallel Latch on External Signal
- 12KB of Shared RAM With Single-Error Detection (Parity)
- Three 120-Byte Register Banks Accessible by Each PRU
- Interrupt Controller (INTC) for Handling System Input Events
- Local Interconnect Bus for Connecting Internal and External Masters to the Resources Inside the PRU-ICSS
- Peripherals Inside the
PRU-ICSS:
- One UART Port With Flow Control Pins, Supports up to 12 Mbps
- One Enhanced Capture (eCAP) Module
- Two MII Ethernet Ports that Support Industrial Ethernet, such as EtherCAT
- One MDIO Port
- Power, Reset, and Clock Management (PRCM) Module
- Controls the Entry and Exit of Stand-By and Deep-Sleep Modes
- Responsible for Sleep Sequencing, Power Domain Switch-Off Sequencing, Wake-Up Sequencing, and Power Domain Switch-On Sequencing
- Clocks
- Integrated 15- to 35-MHz High-Frequency Oscillator Used to Generate a Reference Clock for Various System and Peripheral Clocks
- Supports Individual Clock Enable and Disable Control for Subsystems and Peripherals to Facilitate Reduced Power Consumption
- Five ADPLLs to Generate System Clocks (MPU Subsystem, DDR Interface, USB and Peripherals [MMC and SD, UART, SPI, I2C], L3, L4, Ethernet, GFX [SGX530], LCD Pixel Clock)
- Power
- Two Nonswitchable Power Domains (Real-Time Clock [RTC], Wake-Up Logic [WAKEUP])
- Three Switchable Power Domains (MPU Subsystem [MPU], SGX530 [GFX], Peripherals and Infrastructure [PER])
- Implements SmartReflex™ Class 2B for Core Voltage Scaling Based On Die Temperature, Process Variation, and Performance (Adaptive Voltage Scaling [AVS])
- Dynamic Voltage Frequency Scaling (DVFS)
- Real-Time Clock (RTC)
- Real-Time Date (Day-Month-Year-Day of Week) and Time (Hours-Minutes-Seconds) Information
- Internal 32.768-kHz Oscillator, RTC Logic and 1.1-V Internal LDO
- Independent Power-on-Reset (RTC_PWRONRSTn) Input
- Dedicated Input Pin (EXT_WAKEUP) for External Wake Events
- Programmable Alarm Can be Used to Generate Internal Interrupts to the PRCM (for Wakeup) or Cortex-A8 (for Event Notification)
- Programmable Alarm Can be Used With External Output (PMIC_POWER_EN) to Enable the Power Management IC to Restore Non-RTC Power Domains
- Peripherals
- Up to Two USB 2.0 High-Speed DRD (Dual-Role Device) Ports With Integrated PHY
- Up to Two Industrial Gigabit Ethernet MACs (10, 100, 1000
Mbps)
- Integrated Switch
- Each MAC Supports MII, RMII, RGMII, and MDIO Interfaces
- Ethernet MACs and Switch Can Operate Independent of Other Functions
- IEEE 1588v1 Precision Time Protocol (PTP)
- Up to Two Controller-Area
Network (CAN) Ports
- Supports CAN Version 2 Parts A and B
- Up to Two Multichannel Audio
Serial Ports (McASPs)
- Transmit and Receive Clocks up to 50 MHz
- Up to Four Serial Data Pins per McASP Port With Independent TX and RX Clocks
- Supports Time Division Multiplexing (TDM), Inter-IC Sound (I2S), and Similar Formats
- Supports Digital Audio Interface Transmission (SPDIF, IEC60958-1, and AES-3 Formats)
- FIFO Buffers for Transmit and Receive (256 Bytes)
- Up to Six
UARTs
- All UARTs Support IrDA and CIR Modes
- All UARTs Support RTS and CTS Flow Control
- UART1 Supports Full Modem Control
- Up to Two Master and Slave McSPI Serial
Interfaces
- Up to Two Chip Selects
- Up to 48 MHz
- Up to Three MMC, SD, SDIO
Ports
- 1-, 4- and 8-Bit MMC, SD, SDIO Modes
- MMCSD0 has Dedicated Power Rail for 1.8‑V or 3.3-V Operation
- Up to 48-MHz Data Transfer Rate
- Supports Card Detect and Write Protect
- Complies With MMC4.3, SD, SDIO 2.0 Specifications
- Up to Three I2C
Master and Slave Interfaces
- Standard Mode (up to 100 kHz)
- Fast Mode (up to 400 kHz)
- Up to Four Banks of General-Purpose I/O (GPIO)
Pins
- 32 GPIO Pins per Bank (Multiplexed With Other Functional Pins)
- GPIO Pins Can be Used as Interrupt Inputs (up to Two Interrupt Inputs per Bank)
- Up to Three External DMA Event Inputs that can Also be Used as Interrupt Inputs
- Eight 32-Bit General-Purpose Timers
- DMTIMER1 is a 1-ms Timer Used for Operating System (OS) Ticks
- DMTIMER4–DMTIMER7 are Pinned Out
- One Watchdog Timer
- SGX530 3D Graphics Engine
- Tile-Based Architecture Delivering up to 20 Million Polygons per Second
- Universal Scalable Shader Engine (USSE) is a Multithreaded Engine Incorporating Pixel and Vertex Shader Functionality
- Advanced Shader Feature Set in Excess of Microsoft VS3.0, PS3.0, and OGL2.0
- Industry Standard API Support of Direct3D Mobile, OGL-ES 1.1 and 2.0, and OpenMax
- Fine-Grained Task Switching, Load Balancing, and Power Management
- Advanced Geometry DMA-Driven Operation for Minimum CPU Interaction
- Programmable High-Quality Image Anti-Aliasing
- Fully Virtualized Memory Addressing for OS Operation in a Unified Memory Architecture
- LCD
Controller
- Up to 24-Bit Data Output; 8 Bits per Pixel (RGB)
- Resolution up to 2048 × 2048 (With Maximum 126-MHz Pixel Clock)
- Integrated LCD Interface Display Driver (LIDD) Controller
- Integrated Raster Controller
- Integrated DMA Engine to Pull Data from the External Frame Buffer Without Burdening the Processor via Interrupts or a Firmware Timer
- 512-Word Deep Internal FIFO
- Supported Display Types:
- Character Displays - Uses LIDD Controller to Program these Displays
- Passive Matrix LCD Displays - Uses LCD Raster Display Controller to Provide Timing and Data for Constant Graphics Refresh to a Passive Display
- Active Matrix LCD Displays - Uses External Frame Buffer Space and the Internal DMA Engine to Drive Streaming Data to the Panel
- 12-Bit Successive
Approximation Register (SAR) ADC
- 200K Samples per Second
- Input can be Selected from any of the Eight Analog Inputs Multiplexed Through an 8:1 Analog Switch
- Can be Configured to Operate as a 4-Wire, 5-Wire, or 8-Wire Resistive Touch Screen Controller (TSC) Interface
- Up to
Three 32-Bit eCAP Modules
- Configurable as Three Capture Inputs or Three Auxiliary PWM Outputs
- Up to Three
Enhanced High-Resolution PWM Modules (eHRPWMs)
- Dedicated 16-Bit Time-Base Counter With Time and Frequency Controls
- Configurable as Six Single-Ended, Six Dual-Edge Symmetric, or Three Dual-Edge Asymmetric Outputs
- Up to Three 32-Bit Enhanced Quadrature Encoder Pulse (eQEP) Modules
- Device Identification
- Contains Electrical Fuse Farm (FuseFarm) of Which Some Bits are Factory
Programmable
- Production ID
- Device Part Number (Unique JTAG ID)
- Device Revision (Readable by Host ARM)
- Contains Electrical Fuse Farm (FuseFarm) of Which Some Bits are Factory
Programmable
- Debug Interface Support
- JTAG and cJTAG for ARM (Cortex-A8 and PRCM), PRU-ICSS Debug
- Supports Device Boundary Scan
- Supports IEEE 1500
- DMA
- On-Chip Enhanced DMA Controller (EDMA) has Three Third-Party Transfer
Controllers (TPTCs) and One Third-Party Channel Controller (TPCC), Which Supports up to 64
Programmable Logical Channels and Eight QDMA Channels. EDMA is Used for:
- Transfers to and from On-Chip Memories
- Transfers to and from External Storage (EMIF, GPMC, Slave Peripherals)
- On-Chip Enhanced DMA Controller (EDMA) has Three Third-Party Transfer
Controllers (TPTCs) and One Third-Party Channel Controller (TPCC), Which Supports up to 64
Programmable Logical Channels and Eight QDMA Channels. EDMA is Used for:
- Inter-Processor Communication (IPC)
- Integrates Hardware-Based Mailbox for IPC and Spinlock for Process
Synchronization Between Cortex-A8, PRCM, and PRU-ICSS
- Mailbox Registers that Generate Interrupts
- Four Initiators (Cortex-A8, PRCM, PRU0, PRU1)
- Spinlock has 128 Software-Assigned Lock Registers
- Mailbox Registers that Generate Interrupts
- Integrates Hardware-Based Mailbox for IPC and Spinlock for Process
Synchronization Between Cortex-A8, PRCM, and PRU-ICSS
- Security
- Crypto Hardware Accelerators (AES, SHA, RNG)
- Secure Boot (optional; requires custom part engagement with TI)
- Boot Modes
- Boot Mode is Selected Through Boot Configuration Pins Latched on the Rising Edge of the PWRONRSTn Reset Input Pin
- Packages:
- 298-Pin S-PBGA-N298 Via Channel Package
(ZCE Suffix), 0.65-mm Ball Pitch - 324-Pin S-PBGA-N324 Package
(ZCZ Suffix), 0.80-mm Ball Pitch
- 298-Pin S-PBGA-N298 Via Channel Package
The AM335x microprocessors, based on the ARM Cortex-A8 processor, are enhanced with image, graphics processing, peripherals and industrial interface options such as EtherCAT and PROFIBUS. The devices support high-level operating systems (HLOS). Processor SDK Linux® and TI-RTOS are available free of charge from TI.
The AM335x microprocessor contains the subsystems shown in the Functional Block Diagram and a brief description of each follows:
The contains the subsystems shown in the Functional Block Diagram and a brief description of each follows:
The microprocessor unit (MPU) subsystem is based on the ARM Cortex-A8 processor and the PowerVR SGX™ Graphics Accelerator subsystem provides 3D graphics acceleration to support display and gaming effects.
The PRU-ICSS is separate from the ARM core, allowing independent operation and clocking for greater efficiency and flexibility. The PRU-ICSS enables additional peripheral interfaces and real-time protocols such as EtherCAT, PROFINET, EtherNet/IP, PROFIBUS, Ethernet Powerlink, Sercos, and others. Additionally, the programmable nature of the PRU-ICSS, along with its access to pins, events and all system-on-chip (SoC) resources, provides flexibility in implementing fast, real-time responses, specialized data handling operations, custom peripheral interfaces, and in offloading tasks from the other processor cores of SoC.
技術資料
設計と開発
各種電源ソリューション
AM3356 に関連する、利用可能な電源ソリューションを検索できます。TI は、自社と他社それぞれの SoC (システム オン チップ)、プロセッサ、マイコン、センサ、FPGA (フィールド プログラマブル ゲート アレイ) に適した、各種電源ソリューションを取り揃えています。
TMDSICE3359 — AM3359 産業用通信エンジン
AM3359 産業用通信エンジン(ICE)は、Sitara AM335x Arm® Cortex®-A8 プロセッサの産業用通信機能にフォーカスしたシステム向けに製作された開発プラットフォームです。
AM335x Arm Cortex-A8 プロセッサは、幅広い産業用オートメーション機器で使用されるリアルタイム通信技術実装のためのプログラマブル・リアルタイム・ユニット(PRU)を内蔵しています。外付け部品点数と基板面積の低減、クラス最高の低消費電力性能を実現します。
TMDSICE3359 は TMDXICE3359 の改訂バージョンであり、量産品の AM3359 (...)
TMDXEVM3358 — AM335x Evaluation Module
AM335x 評価基板 (EVM) を使って、AM335x プロセッサ・ファミリ (AM3351、AM3352、AM3354, AM3356、AM3358) の評価ができます。ファクトリ・オートメーション、ビル・オートメーション、グリッド・インフラなどのアプリケーションを製作することができます。
TPS65217CEVM — TPS65217C 評価モジュール
The TPS65217CEVM is a fully assembled platform for evaluating the performance of the TPS65217C power management device.
TPS65218EVM-100 — TPS65218 評価基板
TPS65218EVM は、TPS65218 電源管理デバイスの性能を評価するための完全な組み立て済みプラットフォームです。
ADVAN-3P-SITARA-SOMS — Advantech 社 Sitara SOM と SBC
Advantech の詳細については www.advantech.com. をご覧ください。
BEAGL-BONE-GRN-ECO — Seeed Studio BeagleBone®Green eco の評価基板
BYTES-3P-SITARASOMS — bytes at work 社 Sitara SOM
Learn more about bytes at work at http://www.bytesatwork.io/en.
COMPU-3P-SITARASOMS — Compulab 社 Sitara SOM
CRLNK-3P-SOMS — Critical Link system on modules for TI ARM-based Processors
Critical Link is a US-based embedded systems company offering System on Modules (SoMs) and scientific imaging platforms for electronic applications around the world. The MitySOM® and MityDSP® families incorporate DSP, FPGA, and ARM technologies, and are designed for long product lifespan and (...)
FORLX-3P-SITARA-SOMS — Forlinx 社 Sitara SOM
MYIR-3P-SITARASOMS — MYIR Sitara SOMs
詳細は、 (...)
OCTVO-3P-AM335X — AM335x をベースとした Octavo Systems のシステム イン パッケージ
Octavo Systems は、世界中のイノベーターの皆様に、SiP (システム イン パッケージ) ベースのソリューションを提供するリーダー企業です。OSD335x ファミリの SiP デバイスを採用すると、TI の Sitara™ AM335x Arm® Cortex®-A8 プロセッサをベースとする高性能組込みシステムの開発と導入を、最も迅速かつ最もコスト効率の優れた方法で実施できます。
OSD335x デバイスは、最大 1GHz で動作する Sitara™ AM335x Arm® Cortex®-A8 プロセッサを、最大 1GB の DDR3、TPS65217C 電源 (...)
PHYTC-3P-PHYBOARD-AM335X — AM335x Arm® をベースとする Sitara™ プロセッサ向けの PHYTEC® phyBOARD®-AM335x 開発キット
phyBOARD®-AM335x が搭載している phyCORE-AM335x システム オン モジュール (SOM) は、キャリア ボード PCB に直接半田付けされた TI の Sitara™ AM335x をベースにしています。SOM はキャリア ボードに対する「直接半田接続 (Direct Solder Connect:DSC)」を採用しているので、ボード間コネクタを省略して、システム コストを削減することができます。Pico-ITX フォーム ファクタを採用した phyBOARD は、信頼性の高い多様な産業用アプリケーションへの展開に最適です。
PHYTEC はシステム オン (...)
TQ-3P-SITARASOMS — TQ Group 社 Sitara SOM
VANWS-3P-VGATEWAY — vGATEWAY reference design from Vanteon Wireless Solutions based on AM335x
Vanteon Gateway™ is a modular bridging platform designed to translate between common wireless interfaces and protocols for Internet of Things (IoT) applications. The Gateway™ platform utilizes the AM335x Sitara ARM-Cortex A8 processor and includes many standard wired and wireless communication (...)
VAR-3P-SITARASOMS — Variscite 社 Sitara SOM
PRUCAPE — TI PRU Cape
TI PRU Cape は、BeagleBone Black アドオン ボードの一種であり、ユーザーの皆様は TI の強力な PRU (プログラマブル リアルタイム ユニット) のコアと基本機能について把握できるようになります。この PRU は待ち時間が短いマイコン サブシステムであり、Sitara AM335x と AM437x の各デバイス ファミリに内蔵されています。 PRU コアは、ディタミニスティック (確定的な) リアルタイム処理、I/O への直接アクセス、非常に短い待ち時間という各種要件向けに最適化済みです。 この製品は、GPIO、オーディオ、温度センサに対応する複数の (...)
WL1835MODCOM8B — WiLink™ 8 モジュール 2.4 GHz Wi-Fi® + Bluetooth® COM8 評価基板
WL1835MODCOM8 は、TI WiLink 8 コンボ モジュール ファミリ向けに 2 種類用意されている評価ボードの 1 つです。5GHz バンドと拡張温度範囲で高パフォーマンスを必要とする設計の場合は、WL1837MODCOM8I をご覧ください。
Sitara 評価基板用の WL1835MODCOM8 キットを使用すると、TI の Sitara マイクロプロセッサ ベースの組込みアプリケーションに Wi-Fi® や Bluetooth® を簡単に追加できるようになります(WL183x モジュールのみ)。TI の WiLink 8 (...)
WL1837MODCOM8I — WiLink™ 8 デュアル バンド 2.4 および 5GHz Wi-Fi® + Bluetooth® COM8 評価基板
WL1837MODCOM8I は、TI の Sitara™ プロセッサを含めた多くのプロセッサとの互換性があり、ホーム オートメーション、ビル オートメーション、スマート エネルギー、ゲートウェイ、ワイヤレス オーディオ、エンタープライズ、ウェアラブル端末、その他多くの産業用アプリケーションや IoT (...)
TMDSEMU200-U — XDS200 USB デバッグ プローブ
XDS200 は、TI の組込みデバイスのデバッグに使用するデバッグ プローブ (エミュレータ) です。大半のデバイスでは、より新しく低コストな XDS110 (www.ti.com/tool/TMDSEMU110-U) の使用が推奨されます。XDS200 は、単一のポッドで IEEE1149.1、IEEE1149.7、SWD などの幅広い規格をサポートします。すべての XDS デバッグ プローブは、ETB (Embedded Trace Buffer、組込みトレース バッファ) 搭載のすべての Arm® と DSP プロセッサに対し、コア トレースとシステム トレースをサポートしています。
(...)
TMDSEMU560V2STM-U — XDS560™ ソフトウェア v2 システム トレース USB デバッグ プローブ
XDS560v2 は、XDS560™ デバッグ プローブ ファミリの中で最高の性能を提供し、従来型の JTAG 規格(IEEE1149.1)と、cJTAG(IEEE1149.7)の両方をサポートしています。 シリアル ワイヤ デバッグ (SWD) はサポートしていないことに注意してください。
すべての XDS デバッグ プローブは、ETB(Embedded Trace Buffer、組込みトレース バッファ)搭載のすべての ARM と DSP プロセッサに対し、コア トレースとシステム トレースをサポートしています。 ピンのトレースには、XDS560v2 PRO TRACE が必要です。
(...)
TMDSEMU560V2STM-UE — Spectrum Digital XDS560v2 システム・トレース USB およびイーサネット
The XDS560v2 System Trace is the first model of the XDS560v2 family of high-performance debug probes (emulators) for TI processors. The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).
The (...)
LB-3P-TRACE32-ARM — Arm® ベースのマイコンおよびプロセッサ用Lauterbach TRACE32® デバッグおよびトレースシステム
LauterbachのTRACE32® ツールは最先端のハードウェア/ソフトウェアコンポーネントのスイートで、あらゆる種類の Arm® ベースのマイコンとプロセッサの分析、最適化、認証を実行できます。組込みシステムと SoC 向けの世界的に有名なデバッグ/トレースソリューションは、初期のシリコン開発前の段階から製品認証やトラブルシューティングに至る、あらゆる開発段階に最適なソリューションです。Lauterbach (...)
PROCESSOR-SDK-LINUX-AM335X — Linux プロセッサ SDK、AM335x 用
プロセッサ SDK(ソフトウェア開発キット)は TI の組込みプロセッサ向けの統合ソフトウェア・プラットフォームで、セットアップが容易でベンチマークとデモをすぐに利用できます。 プロセッサ SDK のすべてのリリースは TI の広範なプラットフォームにわたる一貫性を持っており、複数のデバイスでのソフトウェアのシームレスな再利用や移行を可能にします。 プロセッサ SDK と TI の組込みプロセッサ・ソリューションにより、スケーラブルなプラットフォーム・ソリューションの開発が極めて容易になります。
プロセッサ SDK v.02.xx は、Linux と TI-RTOS (...)
PROCESSOR-SDK-LINUX-RT-AM335X — AM335x 向け Linux-RT プロセッサ SDK
プロセッサ SDK(ソフトウェア開発キット)は TI の組込みプロセッサ向けの統合ソフトウェア・プラットフォームで、セットアップが容易でベンチマークとデモをすぐに利用できます。 プロセッサ SDK のすべてのリリースは TI の広範なプラットフォームにわたる一貫性を持っており、複数のデバイスでのソフトウェアのシームレスな再利用や移行を可能にします。 プロセッサ SDK と TI の組込みプロセッサ・ソリューションにより、スケーラブルなプラットフォーム・ソリューションの開発が極めて容易になります。
プロセッサ SDK v.02.xx は、Linux と TI-RTOS (...)
PROCESSOR-SDK-RTOS-AM335X — AM335x と AMIC110 デバイス向けの RTOS プロセッサ SDK
プロセッサ SDK(ソフトウェア開発キット)は TI の組込みプロセッサ向けの統合ソフトウェア・プラットフォームで、セットアップが容易でベンチマークとデモをすぐに利用できます。 プロセッサ SDK のすべてのリリースは TI の広範なプラットフォームにわたる一貫性を持っており、複数のデバイスでのソフトウェアのシームレスな再利用や移行を可能にします。 プロセッサ SDK と TI の組込みプロセッサ・ソリューションにより、スケーラブルなプラットフォーム・ソリューションの開発が極めて容易になります。
プロセッサ SDK v.02.xx は、Linux と TI-RTOS (...)
TIBLUETOOTHSTACK-SDK — TI のデュアル モード Bluetooth® スタック
TI のデュアル モード Bluetooth スタックは、Bluetooth + Bluetooth Low Energy を実現し、Bluetooth 4.0/4.1/4.2 仕様を実装したシングル モードとデュアル モードの製品で構成されています。Bluetooth スタックは、Bluetooth Special Interest Group (SIG) 認定および認証済みで、ロイヤリティなしで使用でき、シンプルなコマンド ラインのサンプル アプリケーションが用意されており、迅速な開発が可能です。また、必要なら MFI 機能の利用も可能です。
このスタックは、以下のデバイスで動作します:
- (...)
CCSTUDIO — Code Composer Studio 統合開発環境(IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SYSCONFIG — SysConfigのスタンドアロン・デスクトップ・バージョン
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
GHS-INTEGRITY-RTOS — Green Hills の INTEGRITY RTOS
Green Hills Software の詳細については、www.ghs.com (...)
MG-3P-NUCLEUS-RTOS — Mentor Graphics Nucleus RTOS
QNX-3P-NEUTRINO-RTOS — QNX Neutrino® リアルタイム・オペレーティング・システム (RTOS)
PRU-ICSS-ETHERNETIP-ADAPTER — PRU-ICSS ソフトウェア、EtherNetIP アダプタ用
PRU-ICSS プロトコルは TI Sitara プロセッサ向けの産業用リアルタイム通信を可能にします。 PRU-ICSS プロトコルは、TI の統合型ソフトウェア開発プラットフォームであるプロセッサ SDK RTOS の上位に構築されており、最適化済みの PRU-ICSS ファームウェア、Arm プロセッサに対応する PRU-ICSS ドライバ、複数のサンプル アプリケーションで構築されています。PRU-ICSS ファームウェアは PRU コア上で動作し、タイムクリティカルなリンク レイヤ処理を、TI-RTOS を実行しているメインの Arm (...)
PRU-ICSS-HSR-PRP-DAN — PRU-ICSS ソフトウェア、HSR/PRP 用
PRU-ICSS プロトコルは TI Sitara プロセッサ向けの産業用リアルタイム通信を可能にします。 PRU-ICSS プロトコルは、TI の統合型ソフトウェア開発プラットフォームであるプロセッサ SDK RTOS の上位に構築されており、最適化済みの PRU-ICSS ファームウェア、Arm プロセッサに対応する PRU-ICSS ドライバ、複数のサンプル アプリケーションで構築されています。PRU-ICSS ファームウェアは PRU コア上で動作し、タイムクリティカルなリンク レイヤ処理を、TI-RTOS を実行しているメインの Arm (...)
PRU-ICSS-PROFIBUS-SLAVE — PRU-ICSS ソフトウェア、PROFIBUS スレーブ用
PRU-ICSS プロトコルは TI Sitara プロセッサ向けの産業用リアルタイム通信を可能にします。 PRU-ICSS プロトコルは、TI の統合型ソフトウェア開発プラットフォームであるプロセッサ SDK RTOS の上位に構築されており、最適化済みの PRU-ICSS ファームウェア、Arm プロセッサに対応する PRU-ICSS ドライバ、複数のサンプル アプリケーションで構築されています。PRU-ICSS ファームウェアは PRU コア上で動作し、タイムクリティカルなリンク レイヤ処理を、TI-RTOS を実行しているメインの Arm (...)
PRU-ICSS-PROFINET-SLAVE — PRU-ICSS ソフトウェア、Profinet スレーブ用
PRU-ICSS プロトコルは TI Sitara プロセッサ向けの産業用リアルタイム通信を可能にします。 PRU-ICSS プロトコルは、TI の統合型ソフトウェア開発プラットフォームであるプロセッサ SDK RTOS の上位に構築されており、最適化済みの PRU-ICSS ファームウェア、Arm プロセッサに対応する PRU-ICSS ドライバ、複数のサンプル アプリケーションで構築されています。PRU-ICSS ファームウェアは PRU コア上で動作し、タイムクリティカルなリンク レイヤ処理を、TI-RTOS を実行しているメインの Arm (...)
WIND-3P-VXWORKS-LINUX-OS — Wind River 社 Processors VxWorks / Linux オペレーティング・システム
Wind River is a global leader in delivering software for the Internet of Things (IoT). The company’s technology has been powering the safest, most secure devices in the world since 1981 and today is found in more than 2 billion products. Wind River offers a comprehensive edge-to-cloud product (...)
WIT-3P-SITARABSP — Witekio 社 Sitara 向け Android / Windows オペレーティング・システム
(...)
SITARA-DDR-CONFIG-TOOL-AM335X — AM335x and AMIC110 EMIF Tools
Sitara™ EMIF ツールは、外部 DDR メモリ デバイスへのアクセスのために TI のプロセッサを構成するインターフェイスを提供するソフトウェア ツールです。また、このツールはボードの配線スキューを補正する目的で、遅延ロック ループ(Delay Locked Loop、DLL)設定の最適化も行います。結果は、EMIF 構成レジスタという形で出力されます。その結果を、プロセッサ SDK、Code Composer Studio、またはカスタム ソフトウェアにインポートして使用することもできます。
UNIFLASH — ほとんどの TI 製マイコン(MCU)とミリ波センサに対応する UniFlash
UniFlash は、テキサス インスツルメンツの広範な CCStudio™ 開発エコシステムであり、マイコンやワイヤレス コネクティビティ デバイスが搭載しているオンチップ フラッシュと、テキサス インスツルメンツ製プロセッサ向けのオンボード フラッシュに対してプログラミング (書き込み) を行うためのソフトウェア ツールです。UniFlash には、グラフィカル インターフェイスとコマンド ライン インターフェイスの両方が備わっており、デスクトップまたはクラウドで実行できます。
UniFlash は CCStudio™ Developer Zone (...)
AUTOMATA-3P-INDUSTRIALCOMMS — Cannon Automata Sercos III
AM335-PET-CALC — AM335x Power Estimation Tool
CLOCKTREETOOL — Clock Tree Tool for Sitara™ ARM® Processors
The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:
- Visualize the device clock tree
- Interact with clock tree (...)
SITARA-DDR-CONFIG-TOOL-AM65X-DRA80XM — AM65x/DRA80xM EMIF (外部メモリ インターフェイス) ツールのスプレッドシート
Sitara™ EMIF ツールは、外部 DDR メモリ デバイスへのアクセスのために TI のプロセッサを構成するインターフェイスを提供するソフトウェア ツールです。また、このツールはボードの配線スキューを補正する目的で、遅延ロック ループ(Delay Locked Loop、DLL)設定の最適化も行います。結果は、EMIF 構成レジスタという形で出力されます。その結果を、プロセッサ SDK、Code Composer Studio、またはカスタム ソフトウェアにインポートして使用することもできます。
多くの TI リファレンス デザインには、AM3356 があります。
TI のリファレンス デザイン セレクション ツールを使用すると、開発中のアプリケーションやパラメータとの適合度が最も高いデザインの確認と特定を進めることができます。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| NFBGA (ZCZ) | 324 | Ultra Librarian |
| NFBGA (ZCE) | 298 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。